Westinghouse 6103935 Handleiding

Westinghouse Niet gecategoriseerd 6103935

Lees hieronder de 📖 handleiding in het Nederlandse voor Westinghouse 6103935 (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

Installation and Safety Instructions

Warning: Electrical shock can result in serious injury.

Read and follow instructions exactly as shown. If instructions are unclear, do not proceed. Contact a qualified electrician. Read

all instructions before beginning. Proper wiring is essential for safe operation of this fixture. When cutting or drilling into walls

or ceilings, do not damage electrical wiring, gas lines, or water lines. If any of the fixture or wiring components are damaged, do

not install fixture. Return to place of purchase.

If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his

service agent or a similar qualified person in order to avoid a hazard.

For indoor use only.

ASSEMBLY INSTRUCTIONS FOR INDOOR LIGHTING FIXTURE

Congratulations on your Westinghouse purchase. This fixture has been designed to give you many years of beauty

and service. For questions and comments, please visit www.westinghouselighting.eu/contact-us and www.

westinghouselighting.de/contact-us

NOTE: Carefully unpack fixture and parts. Make sure all parts are included before discarding any packing materials (see

figure 1).

MOUNTING AND WIRING INSTRUCTIONS

NOTE: Line art shown may not exactly match the fixture enclosed. However, the installation instructions do apply to this

fixture.

1. Thread mounting screws (A) into the matching holes of mounting bar (B).

2. Place mounting bar (B) flush against ceiling at desired mounting location. Using outside mounting bar holes as a

guide, mark where pilot holes are to be drilled.

3. Inset two plastic anchors (D) into the pilot holes (for drywall ceiling).

4. Align outside mounting bar holes with plastic anchors (D) (If applicable). Secure mounting bar (B) into place using

wood screws (E).

5. If need adjusting length of fixture, loosen set screw (C) at the wire nut (F) and carefully insert/pull the cord (G) into/

from the canopy (H). Then, secure the set screw (C) at the desired wire location.

6. Make an electrical connection by loosening the terminal screws on the terminal block (M) and inserting the live,

neutral and ground terminals.

7. Tighten terminal screws. Make sure there are no stray wires.

8. Raise canopy (H) to ceiling, allowing mounting screw (A) to protrude through openings in canopy (H) and secure into

place with cap nuts (T).

9. Take off the retaining ring (J) from the socket (L). Install the shade (I) and secure with retaining ring (J).

10. Install lamp (K) (not supplied). (Please do not exceed the maximum capacity recommended on the socket).

CLEANING AND CARE

To clean, wipe fixture with soft cloth. Clean glass with mild soap. Spray from chemical cleaners can discolor the finish of

fixture. Do not use scouring pads, powders, steel wool or abrasive paper to clean this fixture.

NOTE FOR FIXTURES THAT ARE SOLID BRASS:

Your hand-crafted, solid brass lighting fixture has been coated with a durable, baked-on acrylic lacquer which gives

maximum protection against the weather. However, in time the brightness of the brass will tarnish, giving way to an

authentic old-world brass finish. To keep your solid brass fixture looking new for years to come, regularly apply a good

quality, non-abrasive car wax to all metal surfaces, giving the fixture an extra protective covering.

Meaning of crossed-out wheeled dustbin:

Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact you local

government for information regarding the collection systems available.

If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get

into the food chain, damaging your health and well-being.

When replacing old appliances with new ones, the retailer is legally obligated to take back your old appliance for disposal

at least free of charge.

Appliance specifications - TECHNICAL CHARACTERISTICS

Rated voltage 220-240V~

Rated frequency 50/60 Hz

Rated wattage E27 Max.40W

Protection class CLASS I

IP number IP20

Ambient temperature 40

Westinghouse Lighting, Philadelphia, PA 19154-1029, U.S.A.

www.westinghouselighting.com

, WESTINGHOUSE, and INNOVATION YOU CAN BE SURE OF

are trademarks of Westinghouse Electric Corporation.

Used under license by Westinghouse Lighting.

Made in China

W-604

052818

*NOT SUPPLIED

FIGURE 1.

Product specificaties

Merk:	Westinghouse
Categorie:	Niet gecategoriseerd
Model:	6103935

Heb je hulp nodig?

Als je hulp nodig hebt met Westinghouse 6103935 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Westinghouse

Westinghouse WHXC7000 Handleiding

1 Juni 2023

Westinghouse ULX110 Handleiding

29 Mei 2023

Westinghouse 6103835 Handleiding

21 Mei 2023

Westinghouse WHEHP01K Handleiding

16 Mei 2023

Westinghouse WHKTPK09K Handleiding

26 April 2023

Westinghouse 6328735 Handleiding

14 April 2023

Westinghouse Iron Hill Handleiding

12 April 2023

Westinghouse Parker Mews Handleiding

7 April 2023

Westinghouse WHKTPK07W Handleiding

27 Maart 2023

Westinghouse Stella Mira Handleiding

25 Maart 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Vitec MGW Diamond-HX OG Handleiding

23 November 2024

Electrolux STA9 Handleiding

23 November 2024

Electrolux UMP3 Handleiding

23 November 2024

Electrolux ZS70GL Handleiding

23 November 2024

Bosch HEZ8TK36UC Handleiding

23 November 2024

Bosch HEZ8ZZ36UC Handleiding

23 November 2024

Bosch HDZIT301 Handleiding

23 November 2024

Bosch HEZBS301 Handleiding

23 November 2024

LG LX-330 Handleiding

23 November 2024

Stamos S-PLASMA 60U Handleiding

23 November 2024