Wells WB1E Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Wells WB1E (24 pagina's) in de categorie Wafelijzer. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24
WELLS MANUFACTURING
10 Sunnen Dr., St. Louis, MO 63143
telephone: 314-678-6314
fax: 314-781-2714
www.wellsbloomfield.com
IMPORTANT: DO NOT DISCARD THIS MANUAL
This manual is considered to be part of the appliance and is to be given to the OWNER or
MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of
this appliance. Additional manuals are available from your WELLS DEALER.
THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR
INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any
questions concerning installation, operation or maintenance of this equipment.
OWNERS MANUAL
WAFFLE
BAKER
MODELS
WB1, WB1E
WB2, WB2E
Includes
INSTALLATION
USE & CARE
EXPLODED VIEW
PARTS LIST
WIRING DIAGRAM
212
p/n Rev. K M212 2M-37055 131111
Model WB2E
Model WB1E
equipment manufactured by WELLS MANUFACTURING is
warranted against defects in materials and workmanship for a
period of one year from the date of original installation or 18
months from the date of shipment from our factory, whichever
comes îšżrst, and is for the beneîšżt of the original purchaser
only.
THIS WARRANTY IS THE COMPLETE AND ONLY
WARRANTY, EXPRESSED OR IMPLIED IN LAW OR IN
FACT, INCLUDING BUT NOT LIMITED TO, WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR ANY
PARTICULAR PURPOSE, AND/OR FOR DIRECT, INDIRECT
OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH
WELLS PRODUCTS. This warranty is void if it is determined
that, upon inspection by an authorized service agency,
the equipment has been modiîšżed, misused, misapplied,
improperly installed, or damaged in transit or by re, ood
or act of God. It also does not apply if the serial nameplate
has been removed, or if service is performed by unauthorized
personnel. The prices charged by Wells Manufacturing for
its products are based upon the limitations in this warranty.
repair of defects without charge by a Wells Manufacturing
factory authorized service agency or one of its sub-service
agencies. This service will be provided on customer’s
premises for non-portable models. Portable models (a
device with a cord and plug) must be taken or shipped to the
closest authorized service agency, transportation charges
prepaid, for service. In addition to restrictions contained in
this warranty, speciîšżc limitations are shown in the Service
Policy and Procedure Guide. Wells Manufacturing authorized
service agencies are located in principal cities. This warranty
is valid in the United States and Canada and void elsewhere.
Please consult your classiîšżed telephone directory, your
foodservice equipment dealer or contact:
Wells Manufacturing
10 Sunnen Dr., St. Louis MO 63143 USA
phone (314) 678-6314 or fax (314) 781-2714
for information and other details concerning warranty.
LIMITED WARRANTY STATEMENT
SERVICE POLICY AND PROCEDURE GUIDE and ADDITIONAL WARRANTY EXCLUSIONS
NOTE: For your protection, please note that equipment
in this shipment was carefully inspected and packaged
by skilled personnel before leaving the factory. Upon
acceptance of this shipment, the transportation company
assumes full responsibility for its safe delivery.
IF SHIPMENT ARRIVES DAMAGED:
1. VISIBLE LOSS OR DAMAGE: Be certain that any
visible loss or damage is noted on the freight bill or
express receipt, and that the note of loss or damage is
signed by the delivery person.
2. FILE CLAIM FOR DAMAGE IMMEDIATELY:
Regardless of the extent of the damage.
3. CONCEALED LOSS OR DAMAGE: if damage is
unnoticed until the merchandise is unpacked, notify the
transportation company or carrier immediately, and îšżle
“CONCEALED DAMAGE” claim with them. This
should be done within îšżfteen (15) days from the date
the delivery was made to you. Be sure to retain the
container for inspection.
Wells Manufacturing cannot assume liability for damage or
loss incurred in transit. We will, however, at your request,
supply you with the necessary documents to support your
claim.
SHIPPING DAMAGE CLAIM PROCEDURE
xi
1. Resetting of safety thermostats, circuit breakers, over
load protectors, and/or fuse replacements are not
covered by this warranty unless warranted conditions
are the cause.
2. All problems due to operation at voltages or phase
other than speciîšżed on equipment nameplates are not
covered by this warranty.
Conversion to correct voltage and/or phase must be
the customer’s responsibility.
3. All problems due to electrical connections not made
in accordance with electrical code requirements
and wiring diagrams supplied with the equipment are
not covered by this warranty.
4. Replacement of items subject to normal wear, to
include such items as knobs, light bulbs; and, normal
maintenance functions including adjustments of
thermostats, adjustment of micro switches and
replacement of fuses and indicating lights are not
covered by warranty.
5. Damage to electrical cords and/or plug due to exposure
to excessive heat are not covered by this warranty.
6. Full use, care, and maintenance instructions supplied
with each machine. Noted maintenance and
preventative maintenance items, such as servicing and
cleaning schedules, are customer responsibility. Those
miscellaneous adjustments noted are customer
responsibility. Proper attention to preventative
maintenance and scheduled maintenance procedures
will prolong the life of the appliance.
7. Travel mileage is limited to sixty (60) miles from an
Authorized Service Agency or one of its sub-service
agencies.
8. All labor shall be performed during regular working
hours. Overtime premium will be charged to the buyer.
9. All genuine Wells replacement parts are warranted
for ninety (90) days from date of purchase on non-
warranty equipment. This parts warranty is limited only
to replacement of the defective part(s). Any use of
non-genuine Wells parts completely voids any
warranty.
10. Installation, labor, and job check-outs are not
considered warranty and are thus not covered by this
warranty.
11. Charges incurred by delays, waiting time or operating
restrictions that hinder the service technician’s ability to
perform service are not covered by warranty. This
includes institutional and correctional facilities.
M212 2M-37055 Owners Manual for WB-1 and WB-2 Wafe Bakers
1
WARRANTY xi
SPECIFICATIONS 1
FEATURES & OPERATING CONTROLS 2
PRECAUTIONS & GENERAL INFORMATION 3
AGENCY LISTING INFORMATION 3
INSTALLATION 4
OPERATION 5, 6
CLEANING INSTRUCTIONS 7, 8
MAINTENANCE - SET BAKING TEMPERATURE 9
TROUBLESHOOTING SUGGESTIONS 9
EXPLODED VIEW & PARTS LIST 10 - 15
WIRING DIAGRAM 16 - 19
CUSTOMER SERVICE DATA Back Cover
Thank You for purchasing this Wells Manufacturing appliance.
Proper installation, professional operation and consistent maintenance of this appliance will ensure that
it gives you the very best performance and a long, economical service life.
This manual contains the information needed to properly install this appliance, and to use and care for
the appliance in a manner which will ensure its optimum performance.
TABLE OF CONTENTS
SPECIFICATIONS
INTRODUCTION
MODEL STYLE VOLTAGE 1ø WATTS AMPS POWER SUPPLY CORD
WB1
Single
Wafe
Baker
120V 900 W 7.5 A NEMA 5-15P
208V 676 W 3.25 A NEMA 6-15P
230V 3.8 CEE 7/VII875 W
240V 900 W 3.75 A NEMA 6-15P
WB1E
120V 900W 7.5 NEMA 5-15P
208/240V 676/900W 3.3/3.8 NEMA 6-15P
220/240 900W 3.8 CE VII 436U
WB1-TM 220 CE 946 W CEE 7/VII4.3 A
WB2
Double
Wafe
Baker
120V 1800 W 15 A NEMA 5-20P
208V 1352 W 6.5 A NEMA 6-15P
230V 1725 W 7.5 A CEE 7/VII
240V 1800 W 7.5 A NEMA 6-15P
WB2E
120V 1800W 15 NEMA 5-20P
208/240V 1352/1800W 6.5/7.5 NEMA 6-15P
220/240 1800W CEE 7/VII7.5
WB2-TM 220 CE 1892 W CEE 7/VII8.6 A


Product specificaties

Merk: Wells
Categorie: Wafelijzer
Model: WB1E

Heb je hulp nodig?

Als je hulp nodig hebt met Wells WB1E stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Wafelijzer Wells

Handleiding Wafelijzer

Nieuwste handleidingen voor Wafelijzer