Wells SW10T Handleiding

Wells Waterkoker SW10T

Lees hieronder de 📖 handleiding in het Nederlandse voor Wells SW10T (28 pagina's) in de categorie Waterkoker. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/28
WELLS MANUFACTURING
10 Sunnen Dr., St. Louis, MO 63143
telephone: 314-678-6314
fax: 314-781-2714
www.wellsbloomfield.com
IMPORTANT: DO NOT DISCARD THIS MANUAL
This manual is considered to be part of the appliance and is to be given to the OWNER or
MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of
this appliance. Additional manuals are available from your WELLS DEALER.
THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR
INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any
questions concerning installation, operation or maintenance of this equipment.
OWNERS MANUAL
WELLS
COUNTERTOP
WARMERS
with
THERMOSTAT
CONTROL
MODELS
SMPT, SMPTD
SMPT27, SMPTD27
SW10T
TMPT, TMPTD
HMPGW
Includes
INSTALLATION
USE & CARE
EXPLODED VIEW
PARTS LIST
WIRING DIAGRAM
001
p/n 2M- Rev. K M001 1006303305 15
Model TMPT
Model SMPT
Model SW10T
001 p/n 2M-303305 Owners Manual CT Warmers / Thermostat Control
equipment manufactured by Wells Manufacturing is
warranted against defects in materials and workmanship
for a period of one year from the date of original installation
or 18 months from the date of shipment from our factory,
whichever comes rst, and is for the benet of the original
purchaser only.
THIS WARRANTY IS THE COMPLETE AND ONLY
WARRANTY, EXPRESSED OR IMPLIED IN LAW
OR IN FACT, INCLUDING BUT NOT LIMITED TO,
WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR ANY PARTICULAR PURPOSE, AND/OR FOR
DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES
IN CONNECTION WITH WELLS PRODUCTS. This
warranty is void if it is determined that, upon inspection
by an authorized service agency, the equipment has been
modied, misused, misapplied, improperly installed, or
damaged in transit or by re, ood or act of God. It also
does not apply if the serial nameplate has been removed,
or if service is performed by unauthorized personnel. The
based upon the limitations in this warranty. Seller’s obligation
under this warranty is limited to the repair of defects without
charge by a Wells Manufacturing factory authorized service
agency or one of its sub-service agencies. This service will
be provided on customer’s premises for non-portable models.
Portable models (a device with a cord and plug) must be
taken or shipped to the closest authorized service agency,
transportation charges prepaid, for service. In addition to
restrictions contained in this warranty, specic limitations
are shown in the Service Policy and Procedure Guide. Wells
Manufacturing authorized service agencies are located in
principal cities. This warranty is valid in the United States and
Canada and void elsewhere. Please consult your classied
telephone directory, your foodservice equipment dealer or
contact:
Wells Manufacturing
10 Sunnen Dr., St. Louis MO 63143 USA
phone (314) 678-6314 or fax (314) 781-2714
for information and other details concerning warranty.
LIMITED WARRANTY STATEMENT
SERVICE POLICY AND PROCEDURE GUIDE and ADDITIONAL WARRANTY EXCLUSIONS
NOTE: For your protection, please note that equipment
in this shipment was carefully inspected and packaged
by skilled personnel before leaving the factory. Upon
acceptance of this shipment, the transportation company
assumes full responsibility for its safe delivery.
IF SHIPMENT ARRIVES DAMAGED:
1. VISIBLE LOSS OR DAMAGE: Be certain that any
visible loss or damage is noted on the freight bill or
express receipt, and that the note of loss or damage is
signed by the delivery person.
2. FILE CLAIM FOR DAMAGE IMMEDIATELY:
Regardless of the extent of the damage.
3. CONCEALED LOSS OR DAMAGE: if damage is
unnoticed until the merchandise is unpacked, notify the
transportation company or carrier immediately, and le
“CONCEALED DAMAGE” claim with them. This
should be done within fteen (15) days from the date
the delivery was made to you. Be sure to retain the
container for inspection.
Wells Manufacturing cannot assume liability for damage or
loss incurred in transit. We will, however, at your request,
supply you with the necessary documents to support your
claim.
SHIPPING DAMAGE CLAIM PROCEDURE
xi
1. Resetting of safety thermostats, circuit breakers, over
load protectors, and/or fuse replacements are not
covered by this warranty unless warranted conditions
are the cause.
2. All problems due to operation at voltages or phase
other than specied on equipment nameplates
are not covered by this warranty. Conversion to
correct voltage and/or phase must be the customer’s
responsibility.
3. All problems due to electrical connections not made
in accordance with electrical code requirements
and wiring diagrams supplied with the equipment are
not covered by this warranty.
4. Replacement of items subject to normal wear, to
include such items as knobs, light bulbs; and, normal
maintenance functions including adjustments of
thermostats, adjustment of micro switches and
replacement of fuses and indicating lights are not
covered by warranty.
5. Damage to electrical cords and/or plug due to exposure
to excessive heat are not covered by this warranty.
6. Full use, care, and maintenance instructions supplied
with each machine. Noted maintenance and
preventative maintenance items, such as servicing and
cleaning schedules, are customer responsibility. Those
miscellaneous adjustments noted are customer
responsibility. Proper attention to preventative
maintenance and scheduled maintenance procedures
will prolong the life of the appliance.
7. Travel mileage is limited to sixty (60) miles from an
Authorized Service Agency or one of its sub-service
agencies.
8. All labor shall be performed during regular working
hours. Overtime premium will be charged to the buyer.
9. All genuine Wells replacement parts are warranted
for ninety (90) days from date of purchase on non-
warranty equipment. This parts warranty is limited only
to replacement of the defective part(s). Any use of non-
genuine Wells parts completely voids any warranty.
10. Installation, labor, and job check-outs are not
considered warranty and are thus not covered by this
warranty.
11. Charges incurred by delays, waiting time or operating
restrictions that hinder the service technician’s ability to
perform service are not covered by warranty. This
includes institutional and correctional facilities.
3
001 p/n 2M-303305 Owners Manual CT Warmers / Thermostat Control
WARRANTY xi
FEATURES & OPERATING CONTROLS 2
PRECAUTIONS & GENERAL INFORMATION 3
AGENCY LISTING INFORMATION 3
INSTALLATION 4
OPERATION 5
CLEANING INSTRUCTIONS 6
TROUBLESHOOTING SUGGESTIONS 8
MAINTENANCE INSTRUCTIONS 9
EXPLODED VIEW & PARTS LIST 10
WIRING DIAGRAM 18
PARTS & SERVICE 20
CUSTOMER SERVICE DATA 21
Thank You for purchasing this Wells Manufacturing appliance.
Proper installation, professional operation and consistent maintenance of this appliance will ensure that it
gives you the very best performance and a long, economical service life.
This manual contains the information needed to properly install this appliance, and to use and care for the
appliance in a manner which will ensure its optimum performance.
TABLE OF CONTENTS
SPECIFICATIONS
INTRODUCTION
MODEL DESCRIPTION VOLTS AMPS WATTS PHASE NEMA PLUG
SMPT 12” x 20” RECTANGLE.
120V 13.8 1650
1 4’ 5-15P120C 11.7 1404
SMPTD 12” x 20” RECTANGLE w/DRAIN 120V 13.8 1650
SMPT 12” x 20” RECTANGLE
208/240 5.9 - 6.9 1240/1650 1 4’ 6-15P
SMPTD 12” x 20” RECTANGLE w/DRAIN
SMPT27 /
SMPTD27 12” x 27” RECTANGLE w & w/o DRAIN
120V 13.8 1650 1
4’ 5-15P
120C 11.7 1404
208/240 6.0 - 6.9 1240/1650 1 4’ 6-15P
SW-10T 11 Qt. ROUND 120V 6.9 825 1 4’ 5-15P
TMPT 2 - 12” x 20” RECTANGLE
120V 15 1800 1 4’ 5-20P
TMPTD 2 - 12” x 20” RECTANGLE w/ DRAIN
TMPT 2 - 12” x 20” RECTANGLE
208/240 8.7 - 10.0 1800/2400 1 4’ 6-15P
TMPTD 2 - 12” x 20” RECTANGLE w/ DRAIN

Product specificaties

Merk: Wells
Categorie: Waterkoker
Model: SW10T

Heb je hulp nodig?

Als je hulp nodig hebt met Wells SW10T stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Waterkoker Wells

Wells

Wells SW10T Handleiding

18 Juni 2023
Wells

Wells HW10 Handleiding

6 Juni 2023

Handleiding Waterkoker

Nieuwste handleidingen voor Waterkoker

Buccan

Buccan BCN-5057 Handleiding

17 Februari 2025
Graef

Graef WK 901 Handleiding

28 Maart 2025
Kenwood

Kenwood ZJP11 Handleiding

27 Maart 2025
Infinity Goods

Infinity Goods Smart electric kettle Handleiding

17 Februari 2025
Goodmans

Goodmans 354910 Handleiding

21 Februari 2025
Goodmans

Goodmans 320115 Handleiding

21 Februari 2025
Toshiba

Toshiba KT-17DR1NMY Handleiding

18 Maart 2025
Toshiba

Toshiba KT-17SH1NMY Handleiding

18 Maart 2025
Mellerware

Mellerware 22330 - RIO Handleiding

21 Februari 2025
Berlinger Haus

Berlinger Haus BH9126 Handleiding

12 Maart 2025