Wavtech LinkD Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Wavtech LinkD (12 pagina's) in de categorie Audio/video-converter. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
2-Channel LOC / Line Driver
10Vrms Output ŸAuto Turn-On OEM Load Detect Compatible
Ÿ
Owners Manual
www.wavtech-usa.com
Any function that requires your prolonged DO NOT DRIVE WHILE DISTRACTED.
attention should not be performed while driving. Always stop the vehicle in a safe
location before performing any such function. Failure to do so may result in an accident.
KEEP THE VOLUME AT MODERATE LEVELS WHILE DRIVING. Excess volume levels
can obscure sounds such as emergency vehicle sirens or road warning signals and may
result in an accident. Continuous exposure to high sound pressure levels may cause
permanent hearing loss. Use common sense and practice safe sound.
FOR USE WITH 12V NEGATIVE GROUND VEHICLE APPLICATIONS ONLY. Using this
product other than in its designed application may result in fire, injury or product
damage.
MAKE THE CORRECT WIRING CONNECTIONS AND USE PROPER FUSE PROTECTION.
Failure to connect wiring correctly or use appropriate fuse protection may result in re,
injury or product damage . Ensure proper fusing of all system power wiring and install a 1-
ampere in-line fuse (not included) with the +12V lead to the unit’s power supply
connector.
DISCONNECT THE NEGATIVE BATTERY TERMINAL BEFORE INSTALLATION. Failure
to do so may result in fire, injury or damage to the unit.
D O NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS.
Arrange wiring and cables to prevent obstructions when driving. Cables or wiring that
obstruct or hang up on places such as steering wheel, brake pedals, etc. can be extremely
hazardous.
DO NOT DAMAGE VEHICLE SYSTEMS OR WIRING WHEN DRILLING HOLES. When
drilling holes in the chassis for installation, take precautions so as not to contact,
puncture or obstruct brake lines, fuel lines, fuel tanks, electrical wiring, etc. Failure to
take such precautions may result in fire or an accident.
DO NOT UTILIZE OR CONNECT TO ANY PART OF VEHICLE SAFETY SYSTEMS. Bolts,
nuts or wires used in the brake, airbag, steering or any other safety-related systems or
fuel tanks should NEVER be used for mounting, power or ground connections. Using such
parts may disable control of the vehicle or result in fire.
WARNING
WARNING This symbol means important instructions.
Failure to heed them can result in serious injury or death.
CAUTION This symbol means important instructions.
Failure to heed them can result in injury or property damages.
1
STOP USE IMMEDIATELY IF A PROBLEM OCCURS. Failure to do so may result in
personal injury or damage to the product. Return it to your authorized Wāvtech dealer.
HAVE AN EXPERT DO THE WIRING AND INSTALLATION. This unit requires special
technical skill and experience for wiring and installation. To insure safety and proper
function, always contact the authorized dealer where you purchased the product to have
it done professionally.
INSTALL THE UNIT SECURELY WITH SPECIFIED PARTS. Be sure to use only the
included parts and specified installation accessories (not included). Use of other than
designated parts may damage this unit. Install the unit securely so that it will not come
loose during a collision or sudden jolt.
ROUTE WIRING AWAY FROM SHARP EDGES AND MOVING PARTS. Arrange cables and
wiring away from sharp or pointed edges and avoid moving parts such as seat hinges or
rails to prevent pinching or wear. Use loom protection where appropriate and always use
a grommet for any wiring routed through metal.
NEVER RUN SYSTEM WIRING OUTSIDE OR UNDERNEATH THE VEHICLE. All wiring
must be routed, secured and protected inside the vehicle. Failure to do so may result in
fire, injury or property damage.
INSTALL THE UNIT IN A DRY AND VENTILATED LOCATION. Avoid mounting locations
where the unit will likely be exposed to high moisture or heat without adequate
ventilation. Moisture penetration or heat buildup may result in product failure.
REDUCE GAIN AND SOURCE VOLUME TO MINIMUM LEVELS FOR INITIAL SYSTEM
TUNING AND BEFORE CONNECTION TO AN AMPLIFIER. Ensure amplifier power is o
before connecting RCA cables and follow proper system gain setting procedures. Failure
to do so may result in damage to the amplifier and/or connected components.
CAUTION
Package Contents:
Main Unit Terminals
Accessories Required for
Installation :(not included)
Mounting Tabs
(detachable)
ŸRCA Interconnects
Ÿ18AWG Wire
ŸIn-line Fuse Holder w/1A fuse
ŸBattery Ring Terminal
ŸWire Crimp Connectors
ŸGrommets and Loom
ŸCable Ties
ŸMounting Screws
2
PWR/SPK GND


Product specificaties

Merk: Wavtech
Categorie: Audio/video-converter
Model: LinkD

Heb je hulp nodig?

Als je hulp nodig hebt met Wavtech LinkD stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Audio/video-converter Wavtech

Handleiding Audio/video-converter

Nieuwste handleidingen voor Audio/video-converter