Wampler Pantheon Handleiding

Wampler Niet gecategoriseerd Pantheon

Lees hieronder de 📖 handleiding in het Nederlandse voor Wampler Pantheon (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 159 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

USER GUIDE

The now legendary Wampler Pantheon provided a unique interpretation of the classic

“Blues Breaker” style stomp box, by capturing all the tonal nuance of the original, but with

added exibility and style. In doing so, it found its way onto thousands of pedalboards

across the world.

Enter the new – a dual overdrive pedal that takes this evolution several Pantheon Deluxe

steps further by offering a exible design with two completely independent Pantheon

circuits, one voiced as a classic blues breaker and one with a more modern boutique

sound. This palace of tone delivers a staggering 200 combinations of gain settings,

featuring dual Inputs and Outputs, and for the rst time ever, Wampler have added

MIDI channel switching to one of their gain pedals.

The lets you dial in two channels of organic creamy gain, gritty Pantheon Deluxe

overdrive, or heavy distortion while retaining Wampler’s famous ease of use and

exibility. Channel 1 delivers a classic Blues Breaker tone, Channel 2 is a recreation of

the original Pantheon, a similar circuit to the Blues Breaker but with a modern boutique feel.

Independent side mounted Voicing and Gain Level switches allow you to further shape your tone to

perfection.

Combining both channels will unleash a whole new world of crisp, harmonic distortion possibilities. You can easily swap the

stacking order, without changing cabling, via the front-mounted Order switch. Optional independent inputs and outputs

allow you to: split each channel in a loop switcher, insert a pedal or chain of pedals between each side, or run the pedal in

stereo to dual ampliers. With the addition of MIDI In and Out, you can now also switch the analog channels of each circuit

on and off with a MIDI switcher - saving you valuable hardware loops on your loop switcher (if it also operates your midi

controls).

Each Channel of the Dual Overdrive feature independent Gain, Level, Treble, and Bass controls to Pantheon Deluxe

enhance the shaping of your tone. The Baxandall-style active Bass control is neutral at noon but boasts an extremely

powerful sweep as you move through the range. A single global Presence control simultaneously alters each channel to add

just the right amount of top-end chime to suit different guitars and ampliers - perfect for when playing live or when in the

studio.

The native sound of this style of pedal has passed the test of time. We are sure that with the advanced connectivity, and vast

array of stacking options, you are going to love the exibility and sheer grunt of the Dual Overdrive. Pantheon Deluxe

Volume: Controls the total

output volume of each channel.

Gain: Turning this control

clockwise will increase the

amount of gain applied to the

signal path of each channel.

Bass: Adjust the amount of

low-end frequencies, turning

clockwise will increase the

levels, counter clockwise to

decrease.

Treble: Adjust the amount of

high-end frequencies, turning

clockwise will increase the

levels, counter clockwise to

decrease.

Gain Level (Side switches L

and R): Set the switch

• top for maximum gain

• middle for medium gain

• bottom for lower gain

Voicing (Side switches L and

R): Set the switch

• top for hard clipping (crunchy)

• middle for blended clipping

• bottom for soft clipping

(smooth)

MIDI: Connect a 3.5mm TRS

MIDI cable via an adapter (if

connecting from one of our

other midi pedals you can use

3.5mm TRS to 3.5mm TRS) - In

at the bottom Triangle, Out at

the Top. See MIDI Section on

next page for more information.

Connections: This pedal has 2 pairs of input and output jacks: if you are using

only one set connect to the jacks marked with solid triangles; if you are using both

sets, the outline triangles indicate the separate output for Channel 1 and input for

Channel 2. This allows you to connect both channels independently (e.g to a loop

switcher), insert a pedal between the channels, or run in stereo.

Power Draw: 55mA, 9-18V Center Negative DC supply only, do not exceed 18V DC

Channel 1: Classic / vintage

“Blues Breaker” voicing

Channel 2: Original Pantheon

(Modern “Boutique” style)

voicing

Presence: Global presence control to add sparkle and

top end to both channels, start off with this turned all the

way counter-clockwise and adjust to suit. The presence

and treble controls are controlling different frequencies, so

multiple tones can be found by cranking presence up and

treble down, and vice versa.

Order: Change the

channel stacking

order with this

switch if you are

using only one input

and output cable.

NOTE: We recommend disconnecting the internal 9V battery if this pedal is used with a power supply.

If the power supplied is insufcient LEDS may icker when a foot switch is pressed to indicate this.

Classic T

Classic Treble Boost

reble Boost

reble BoostClassic Treble Boost

Brian’

Brian’s Blues Stack - Bluesy Drive CH2,

s Blues Stack - Bluesy Drive CH2,

s Blues Stack - Bluesy Drive CH2, Brian’s Blues Stack - Bluesy Drive CH2,

Distortion CH1, stack for lead

Distortion CH1, stack for leadDistortion CH1, stack for lead

Factory Reset

Hold down both footswitches during power up to perform a factory reset. This will:

1. Set the default MIDI channel to omni mode.

2. Set all presets to default (ch1 and ch2 off).

Brian’s suggested settings for you to try out:

MIDI

The Pantheon Deluxe can receive CC messages to turn on/off the drive channels and cycle through

presets, and can receive PC messages to load saved presets (limited to the on/off state of the drive

channels). Note: all channel numbers are specied in the range of 1 – 16, and all controller numbers,

controller values, and program numbers are specied in the range 0 – 127.

MIDI Connections

Connect your midi switcher / another pedal by plugging into the MIDI In  port using either the included

3.5mm to MIDI 5-pin DIN adapter to connect a standard MIDI cable, or if connecting from another pedal

that uses 3.5mm TRS audio connectors, use a standard TRS 3.5mm audio cable. To connect a pedal to

this one further down the chain, connect to the MIDI Out  port

MIDI Channel

By default the pedal is in omni channel mode and will receive commands on any channel. To set the MIDI

Channel the device will receive commands on:

1. Power off the device, press and hold the Left Footswitch (Channel 2 switch), and power the device on.

2. After power up, releases the switch. Both LEDs will blink.

3. Send a MIDI CC message CC32 with value set to the desired MIDI channel: val=0 is Channel 1, up to

val=15 is Channel 16, val=16 is omni. The LEDs will blink in success.

NOTE: This CC message may be sent on any channel.

MIDI CC messages

The Pantheon Deluxe’s two channels can be turned on and off via MIDI control change messages.

Additionally, the preset number may be incremented or decremented by a specied value.

CC Function CC no. Value (0-127) Description

Channel 1 on/off State 0=off, 1-127=on Sets the on/off state of Channel 1 (Ch1)0

Channel 2 on/off State 0=off, 1-127=on Sets the on/off state of Channel 2 (Ch2)1

Ch1 off, Ch2 off Sets Ch1 off and Ch2 off when this command is received2 any value

Ch1 on, Ch2 off Sets Ch1 on and Ch2 off when this command is received3 any value

Ch1 off, Ch2 on Sets Ch1 off and Ch2 on when this command is received4 any value

Ch1 on, Ch2 on Sets Ch1 on and Ch2 on when this command is received5 any value

Preset Increment 16 0-127 Increments the preset number by <value>

Preset Decrement 17 0-127 Decrements the preset number by <value>

MIDI Channel Assign 32 0-16 0-15 = channel 1-16, 16 = omni mode

MIDI PC messages

The Pantheon Deluxe can be congured to store and recall each channel’s on/off state via MIDI program

changes. To save channel on/off preset:

1. Turn on/off the desired channel(s)

2. Press and hold the Channel 1 footswitch for 2 seconds. Both LEDs will blink slowly to indicate the

Pantheon Deluxe is ready to save the preset

3. Send the desired MIDI program change message (0 to 127). The LEDs will blink quickly in succession

to indicate a successful save.

To load a channel on/off preset:

1. Send a PC message to the Pantheon Deluxe.

PC Function PC Number Description

Load a preset 0-127 Loads preset of matching PC number

Save a preset 0-127 When in preset-write mode, sending a PC number will save the current

settings to that preset number

Modern Metal

Modern MetalModern Metal Classic Rock

Classic Rock

Classic RockClassic Rock

Distortion Stack - CH1 Classic Distortion,

Distortion Stack - CH1 Classic Distortion, Distortion Stack - CH1 Classic Distortion,

Engage CH2 for a solo boost

Engage CH2 for a solo boostEngage CH2 for a solo boost

Transparent Boost

ransparent Boost

ransparent BoostTransparent Boost

Product specificaties

Merk:	Wampler
Categorie:	Niet gecategoriseerd
Model:	Pantheon

Heb je hulp nodig?

Als je hulp nodig hebt met Wampler Pantheon stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Wampler

Wampler Handleiding

9 Januari 2024

Wampler Cory Wong Handleiding

12 Augustus 2023

Wampler Metaverse Handleiding

12 Augustus 2023

Wampler Pantheon Handleiding

12 Augustus 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Philips Quick Clean Pot QCP10 Handleiding

24 December 2024

Philips Senseo HD7002 Handleiding

24 December 2024

D-Link DUB-C2 Handleiding

24 December 2024

Nec MultiPresenter Stick DS1-MP10RX1 Handleiding

24 December 2024

Nec DS1-TM01 Handleiding

24 December 2024

Profoto RFi Softbox Octa Handleiding

24 December 2024

Koenic KAP 2523 Handleiding

24 December 2024

Philips HD9921 Handleiding

24 December 2024

Philips Senseo HD7008 Handleiding

24 December 2024

Onkyo IRK1804C Handleiding

24 December 2024