Walther DigiViewPro Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Walther DigiViewPro (36 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/36
2.1306 | 06/09 © 2009
Operating instructions 3 - 10 Bedienungsanleitung 11 - 18
Mode d´emploi 19 - 26 Manual de instrucciones 27 - 34
Digital Night Scope
DigiViewPro
2
Description
Benennung
Désignation
Designacion
Operation
Bedienung
Utilisation
Reglaje
Maintenance
Pflege
Entretien
Cuidados
Safety instructions
Sicherheitshinweise
Consignes de sécurité
Instucciones de seguridad
3
EN
CaUtION
Read these instructions carefully before using the device.
This night scope is a sensitive optoelectronic, digital low-light amplifier and should be
used only under low-light conditions. The image amplifier in the unit can be permanently
damaged by strong light.
The device is equipped with an infrared (IR) illuminator that can be used as an additional
light source. Keep in mind, however, that the beam is also visible to other night vision
devices. Therefore use it with caution.
This device does not show differences in colour. You will only see a black-and-white image.
If you need to distinguish colours, you will always have to make a visual check. Only
specially trained persons may use the device to drive a vehicle or fly an airplane. Always
observe national regulations.
Do not dismantle the device. Do not recharge the batteries, subject them to heat or throw
them into a fire. Improper use can cause a life-threatening explosion or chemical fire. If you
do not intend to use the device for a long period, remove the batteries and store them in a
cool, dry place.
WaRRaNtY
The Umarex company will repair or replace your device free of charge (up to 12 months
from date of purchase) provided the defect was not caused by you. Return the device to the
authorised dealer from where you bought it.
SafEtY INStRUCtIONS


Product specificaties

Merk: Walther
Categorie: Niet gecategoriseerd
Model: DigiViewPro

Heb je hulp nodig?

Als je hulp nodig hebt met Walther DigiViewPro stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Walther

Walther

Walther ZF6x42 Handleiding

6 September 2023
Walther

Walther Q5 Match Handleiding

29 Augustus 2023
Walther

Walther KK500 Handleiding

28 Augustus 2023
Walther

Walther SSP Handleiding

28 Augustus 2023
Walther

Walther LG400 Handleiding

28 Augustus 2023
Walther

Walther PK380 Handleiding

28 Augustus 2023
Walther

Walther LP500 Handleiding

28 Augustus 2023
Walther

Walther PPKS Handleiding

28 Augustus 2023
Walther

Walther PDP Handleiding

28 Augustus 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Festo

Festo VPPI Handleiding

21 November 2024
Festo

Festo SFAB Handleiding

21 November 2024
Festo

Festo SFAH Handleiding

21 November 2024
Festo

Festo DRRD-12 Handleiding

21 November 2024
Festo

Festo SDE3 Handleiding

21 November 2024
Festo

Festo SFTE Handleiding

21 November 2024
Festo

Festo CRVZS-5 Handleiding

21 November 2024