Wallbox Pulsar Plus Socket Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Wallbox Pulsar Plus Socket (15 pagina's) in de categorie Autolader. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/15
1/15
28 November 2023
Pulsar Plus Socket – Online Installation Guide
support.wallbox.com/en/knowledge-base/pulsar-plus-socket-online-installation-guide
1. Technical Specifications
You can consult the complete Datasheet here.
1.1 General Specifications
Charging Mode
(IEC 61851-1)
Mode 3
Connector Type Type 2 socket outlet (shutter)
Dimensions 204.3 x 131 x 142.5 mm
Weight 2.5 kg
Operating
Temperature
-30 ºC to 40 ºC
Storage
Temperature
-40 ºC to 70 ºC
Protecting Ratings IP55, IK10 (High resistance)
Installation location Indoor and outdoor use
Mounting Method Stationary equipment is mounted on the wall. Floor mounting with
appropriate Wallbox accessories.
Intended for use Equipment intended for use by ordinary persons.
Location accesses Equipment for locations with non-restricted access and restricted
access.
Standards RED Directive 2014/53/EU and RoHS Directive 2011/65/EU
Compliant with IEC 62196-2 and NFC 15-100 for France.
1.2 Electrical Specifications
[1]
[1]
2/15
Charging Power 7,4 kW (1P) 1 11 kW (3P) 2 22 kW (3P)
Rated Voltage AC ± 10% 230 V 400 V 400 V
Rated Current 32A 32A 32A
Pulsar Plus Socket can be installed in a single phase installation (see installation guide)
22kW version is limited to 11kW during installation.
Configurable Current From 6A to rated current
Rated Frequency 50 Hz / 60 Hz
Protection rating IP55 / IK10
Overvoltage Category CAT III
Residual Current Protection AC 30mA / DC 6mA
External RCD required for local regulations Type A or Type B
Protection against electric shock CLASS I
Input Cable Section Up to 5×10 mm²
Rated diversity factor (RDF) 1
Rated insulation voltage 1430 Vrms
Rated impulse withstand voltage 2500 V
2. Safety Warnings
A. Flying debris, risk of eye injury
B. Risk of electric shock. Disconnect and wait 10 mins.
C. Caution
D. Sharp element, risk of dangerous cuts
E. Ground earth connection required
F. Special waste treatment
3. Safety Instructions
[1]
[2]
3/15
You can consult the Safety Instructions here.
4. Tools and Mounting Parts
Required tools
Hammer
Step drill bit 8mm
Pencil
Sprit Level
Measuring Tape
Cutting Pliers
HEX tube key 6⌀
Security Torx T20
Utility knife
Mobile Phone
Included Parts
5. Installing the Wallplate
Product specificaties
| Merk: | Wallbox |
| Categorie: | Autolader |
| Model: | Pulsar Plus Socket |
Heb je hulp nodig?
Als je hulp nodig hebt met Wallbox Pulsar Plus Socket stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Autolader Wallbox
22 Augustus 2024
20 Februari 2024
13 Januari 2023
Handleiding Autolader
- Autolader Bosch
- Autolader Huawei
- Autolader AEG
- Autolader Garmin
- Autolader Siemens
- Autolader Alfen
- Autolader Anker
- Autolader BlackVue
- Autolader Blaupunkt
- Autolader Delta
- Autolader Digitus
- Autolader Fronius
- Autolader Livoo
- Autolader Logic3
- Autolader Logilink
- Autolader Mio
- Autolader Mophie
- Autolader PCE
- Autolader Platinet
- Autolader Schneider
- Autolader Silvercrest
- Autolader SMA
- Autolader Tesla
- Autolader Ultimate Speed
- Autolader Naxa
- Autolader Steren
- Autolader Cotech
- Autolader ABL
- Autolader Growatt
- Autolader Lindy
- Autolader Ctek
- Autolader Charge Amps
- Autolader EcoFlow
- Autolader SolarEdge
- Autolader Phoenix Contact
- Autolader EVbee
- Autolader Juice Technology
- Autolader Hesotec Electrify
- Autolader Alpitronic
- Autolader Enelion
- Autolader PRACHT
- Autolader NEcharge
- Autolader Alphatec
- Autolader Spelsberg
- Autolader EM2GO
- Autolader EVtap
- Autolader Loxone
- Autolader Wissenergy
- Autolader Absina
Nieuwste handleidingen voor Autolader
30 November 2024
23 November 2024
19 November 2024
16 November 2024
16 November 2024
12 November 2024
5 November 2024
5 November 2024
5 November 2024
26 Augustus 2024