Wahl Blitz 9884 Handleiding
Wahl
Baardtrimmer
Blitz 9884
Lees hieronder de ð handleiding in het Nederlandse voor Wahl Blitz 9884 (16 pagina's) in de categorie Baardtrimmer. Deze handleiding was nuttig voor 46 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/16
1
2
CONTENTS
IMPORTANT SAFEGUARDS Page 3
OPERATING INSTRUCTIONS Page 5
TIPS FOR SUCCESSFUL STYLING Page 8
CLEANING AND MAINTENANCE Page 13
WIRING Page 15
PRODUCT REGISTRATION Page 15
GUARANTEE Page 17
Please read all instructions carefully to familiarise yourself
with your new Wahl trimmer before using.
Save these instructions for further reference.
For any further assistance or information call Customer Services on
T: 01227 740066
or visit
W: www.wahl.co.uk
E: customer.services@wahl.co.uk
4
unplug this appliance from the electricity
outlet immediately after using.
4.Do not operate the appliance with a
broken cord, plug or charger, or if the
appliance malfunctions, or is dropped
or damaged in anyway.
5.Do not wrap the cord around the appliance.
6.Any servicing or repair must be performed
by an authorised service representative.
7.Do not use outdoors or in damp areas.
8.The use of attachments that are not
supplied by the manufacturer may cause
î¿re, electric shock or injury and damage to
the appliance.
9.To protect against risk of electrical shock,
never immerse the unit or let it come into
contact with water or any other liquids.
Do not use the unit with wet hands. If the
appliance should become wet, damp or fall
in water, remove plug from mains socket
immediately. Do not put your hands in the
water. Do not take into bathroom.
10.Never carry the unit by its power cord.
11.Do not drop or insert any object into any
opening.
12.Use this appliance only for its intended
purpose.
5
13.Exhausted batteries/ rechargeable
batteries should not be disposed of in the
household waste. Dispose of them in a
completely discharged state in accordance
with local legal regulations. Do not throw into
î¿re where heat could cause them to rupture.
TRAVEL PLUG
REMOVE BEFORE USE!
The travel plug is used to prevent the trimmer from accidentally powering
on when traveling. When travel plug is engaged, the power button will not
function.
OPERATING INSTRUCTIONS
Recharging your Lithium Ion Trimmer
1.This trimmer is conveniently designed for household use. It should be
allowed to charge 1 hour before î¿rst use.
2.Remove the trimmer, transformer and accessories from packing material.
3.Connect the transformer to the trimmer. BE SURE THE TRIMMER IS IN
THE OFF POSITION WHEN CHARGING.
4.Plug the transformer into any convenient electrical outlet at the correct voltage.
5.When the trimmer is low in power, it should be connected to the
transformer and plugged into an outlet to assure maximum power is availa-
ble when it is next used. This transformer is designed to completely charge
the battery without over charging.
6.The battery will take approximately 60 minutes to charge. The lithium
ion trimmer also has a quick charge capability, 1 minute quick charge for
over 3 minutes use.
7
Leaving the unit plugged into a dead outlet or an unplugged charger will
drain the battery.
4.If the trimmer does not run and it is completely charged, turn the unit ON
and pinch or push the blades manually. Oil may have dried out between the
blades, so they may be temporarily stuck together.
â If the LED did not îash before the trimmer stopped running, try resetting
by re-charging completely until the LED shuts off.
â Trimming is disabled when charging or if the disabling plug is inserted.
â If the trimmer is fully charged the LED may remain OFF if plugged into
the charger.
â If the trimmer unexpectedly stops operating try resetting the device by
plugging the trimmer into the charger.
â If the LED îashes following a full charge or when not expected, the
trimmer may need to be reset. Re-charge the trimmer and check to see
if the LED is still îashing. If it is, let the trimmer run until fully discharged
and do a full re charge.
BATTERY REMOVAL AND DISPOSAL
Under normal use, the rechargeable battery in your trimmer will last from
three to î¿ve years. If a replacement battery should be necessary, do not
attempt to replace the battery yourself. (See page 16 for details)
DETACHABLE HEADS:
A detachable head system enables you to quickly change from a shaver to
a precision trimmer to trim moustache, goatee, or anywhere. To remove
attachment, simply pull top edge of blade away from body unit. To attach,
align back tab of attachment head to cavity on the inner edge of trimmer unit
and push down on top of blade.
11
Start at the line youâve created and, working from the chin back toward the
ears, trim the area right under your beard line.
5. Deî¿ne the upper part of your beard using the same technique.
BODY GROOMING
The following are suggested steps and head choices. You may î¿nd different
procedures work better for you.
1. If starting with full growth hair, î¿rst use the T-blade trimmer head with the
rounded #1 or #1/2 guide comb to trim hair to a short length.
2. Remove the guide comb, and go back over areas where a shorter cut is
desired. Use care in sensitive areas to avoid cuts in loose skin.
3. If a smooth î¿nish is desired, remove the T-blade, and attach the all-body
shaver. Go over desired areas taking smooth strokes.
TRIMMING ARM & LEG HAIR
Simply glide the trimmer over your arm or leg until desired hair length is
achieved. The î¿rst time you trim the hair, start by using a longer guide comb
on the trimmer, then use progressively shorter settings if a shorter length is
preferred.
TRIMMING CHEST & STOMACH
Glide the trimmer over your torso region, in an upward motion until desired
hair length is achieved. For tight, scratch-free trimming, use the #1 or #1/2
guide comb.
FADE CUT USING T-BLADE
1. Start at the temple and cut all the way around the head to establish the
ultimate location of the fade line. Always cut against the grain for the shortest
cut. Donât force the blade through the hair. Let the trimmer do the work.
2. Next, cut around the head again and up the nape of the neck to the fade
line, brushing away the cut hair as you go. Pull the scalp taut with the thumb
12
for the closest cut. Turn the trimmer upside down when necessary to keep
cutting against the grain. Make sure both sides of the head are even.
3. For the top of the head, cut with the grain using the individual guide comb
attachments. The smaller the number of the comb, the shorter the cut. Comb
or brush the hair as you cut for an even end result.
4. To complete the fade, blend the hair at the fade line by trimming up and
out across the line and against the grain all the way around the head. Then,
repeat all around, turning the trimmer upside down and cutting downward.
The î¿nal objective is to blend the hair so there is no real line, just a perfect
fade from bald to very short hair. You can achieve this by using the #1 guide
comb attachment. Continue combing and cutting until you achieve the desired
effect.
5. To create a part, pick a spot off-center. Pull the scalp tight and with the end
of the blade perpendicular to the head, move the trimmer back and forth to
cut a line. Comb through it and cut again to make sure the cut is precise.
CUTTING HAIR
The î¿rst time you cut the hair, cut only a small amount until you become
accustomed to how long each guide comb leaves the hair. Always start by
placing the largest guide comb on the trimmer, then use shorter combs if a
shorter length is desired.
Remember, between professional haircuts, the hair grows evenly all over
the head and a light trimming at the lower neck and sides may be all that is
needed to bring back that neat, well-groomed look.
For uniform cutting, allow the trimmer to cut its way through the hair. Do not
force it through at a faster rate.
1. Start by combing the hair so it falls into its natural direction.
2. Place the largest guide comb onto your trimmer and start by trimming the
sides from the bottom upwards. Hold the trimmer lightly against the hair, with
teeth of the guide comb pointing up but îat against the head. Slowly lift the
13
trimmer up and outward through the hair, cutting only
a small amount at a time.
Repeat around sides and back of head.
If you desire shorter hair, either change to a shorter
guide comb or apply more pressure and less lift away
from head with the present attachment.
This entire procedure requires practice, and it is
always better to leave too much hair the î¿rst few
haircuts.
CLEANING AND MAINTENANCE
SHAVER HEAD CARE
For maximum performance, we recommend you
clean your shaver after every few shaves.
To clean, turn shaver âOFFâ and remove the foil head
by pushing the shaver head release buttons on the
sides of the shaver and lifting the foil head upward.
Lightly tap the open side of the foil head on a hard
surface to remove the majority of loose stubble
particles. Be careful not to tap foil.
TO REMOVE CUTTER BAR
Turn shaver off. Remove the foil head and, holding
the shaver in one hand, gently pull up on cutter bar.
Be sure your thumb and î¿rst î¿nger are positioned at
each end of the cutter bar. Use the cleaning brush
provided to remove whiskers between the cutting
blades. NOTE: If you do not hold the cutter bar as
shown, brushing the blades could result in damage to
the assembly.
When the foil head and cutter bars are removed
from the shaver, an alternate cleaning method is to rinse them under running
14
water. Simply let them air dry.
After cleaning, replace the cutter bars by pressing down gently. Carefully
replace the foil head, snapping it into place.
From time to time, depending on the density of your beard, you will need to
replace the cutters and foils. If you notice that it is taking you longer to shave,
or if your face starts to feel some irritation, or if the foil seems to become
warm to the touch, it is probably time to replace the cutters and foils. Replace
the cutters and foils only with WAHL parts (92025).
BLADE CARE
Trimmer blades have precision-hardened and ground cutting teeth. Blades
should be handled carefully and never bumped or used to cut dirty or
abrasive material. Clean with the included brush.
Heads should be removed from the trimmer prior to rinsing in water. After
rinsing, allow the heads to air dry completely before reattaching to the
trimmer body. The trimmer body should always be kept away from water to
maximize the life of the motor, battery, and control components.
OILING BLADES
For best results, put one or two drops of Wahl Clipper Oil on
the blades only when necessary, or approximately once a month. Motor
bearings are permanently lubricated, do not attempt to oil.
When oiling your trimmer, turn the trimmer âON,â hold the unit with the blades
facing DOWN and squeeze one or two drops of oil onto the blades. Wipe off
excess oil with soft cloth.
NOTICEâDO NOT OVER OIL!
Excessive oiling or application of liquids will cause damage if allowed to seep
back into motor.
BLADE CLEANING/STORAGE
Before storing your trimmer, use the cleaning brush to whisk any loose hairs
from the unit and the blades. Store unit in such a manner so that blades are
protected from damage.
This appliance should be stored in a manner where it is not subjected to
Crushing, Heating above 100°C (212°F), or Incineration.
15
WIRING
WARNING: IF THE TRANSFORMER IS DAMAGED IT MUST BE
REPLACED IN ORDER TO AVOID A HAZARD. THIS PRODUCT MUST
ONLY BE USED WITH THE TRANSFORMER SUPPLIED. SHOULD
A REPLACEMENT BE REQUIRED CONTACT WAHL CUSTOMER
SERVICES.
PRODUCT REGISTRATION
Wahl are constantly developing and launching new products in the UK.
We would like to understand your product needs and expectations and
we value any comments you may have. As part of Wahl Customer Care,
we are offering you the chance to be kept up to date with the latest
product launches, innovations and special offers.
Please take a minute to register your product online at www.wahl.co.uk.
17
GUARANTEE
This product is guaranteed against defects in material and workmanship
for a period of 5 years from the date of original purchase or receipt as a
gift.
Should this product become defective during the guarantee period,
return it to the store of purchase together with your proof of purchase for
repair or replacement.
Alternatively within the guarantee period you can return the product
to Wahl (UK) Ltd who will repair any such defect or elect to replace
the product or any part of it, without charge, provided there is proof
of purchase. Should a replacement be offered this will not extend the
original guarantee period.
The guarantee becomes invalid in the case of misuse, alteration or
repair by unauthorised persons.
This guarantee does not include blades, cables, shaver heads, foils and
cutters etc which are consumable parts.
This product is designed for domestic use only and use within a
professional environment will invalidate the guarantee.
This guarantee in no way affects your rights under law in the United
Kingdom.
18
Connect with us on
Facebook, Twitter, Pinterest
facebook.com/WahlNation
@WahlNationUK
pinterest.com/wahluk
19
20
WAHL (UK) LIMITED
HERNE BAY TRADE PARK,
SEA STREET
HERNE BAY
KENT
CT6 8JZ.
CUSTOMER SERVICES : 01227 740066T
www.wahl.co.uk
Form No. ZB542 Rev1 02/16
Product specificaties
| Merk: | Wahl |
| Categorie: | Baardtrimmer |
| Model: | Blitz 9884 |
Heb je hulp nodig?
Als je hulp nodig hebt met Wahl Blitz 9884 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Baardtrimmer Wahl
20 Februari 2025
4 Juli 2023
28 Juni 2023
22 Juni 2023
22 Juni 2023
20 Juni 2023
20 Juni 2023
20 Juni 2023
19 Juni 2023
18 Juni 2023
Handleiding Baardtrimmer
- Baardtrimmer Braun
- Baardtrimmer Philips
- Baardtrimmer Panasonic
- Baardtrimmer AEG
- Baardtrimmer Grundig
- Baardtrimmer Unold
- Baardtrimmer Adler
- Baardtrimmer Alpina
- Baardtrimmer BaByliss
- Baardtrimmer Bestron
- Baardtrimmer Beurer
- Baardtrimmer Bomann
- Baardtrimmer Domo
- Baardtrimmer Efbe-schott
- Baardtrimmer Emerio
- Baardtrimmer ETA
- Baardtrimmer Fagor
- Baardtrimmer Ferrari
- Baardtrimmer G3 Ferrari
- Baardtrimmer Home Electric
- Baardtrimmer Hyundai
- Baardtrimmer Innoliving
- Baardtrimmer Koenic
- Baardtrimmer Lanaform
- Baardtrimmer Livoo
- Baardtrimmer Maxwell
- Baardtrimmer Medisana
- Baardtrimmer Melissa
- Baardtrimmer Palson
- Baardtrimmer Princess
- Baardtrimmer Remington
- Baardtrimmer Rowenta
- Baardtrimmer Sencor
- Baardtrimmer Severin
- Baardtrimmer Silvercrest
- Baardtrimmer Solac
- Baardtrimmer Stihl
- Baardtrimmer Taurus
- Baardtrimmer Termozeta
- Baardtrimmer Trebs
- Baardtrimmer Tristar
- Baardtrimmer Ufesa
- Baardtrimmer Vitek
- Baardtrimmer Zelmer
- Baardtrimmer Jata
- Baardtrimmer Arzum
- Baardtrimmer Becken
- Baardtrimmer Clatronic
- Baardtrimmer Concept
- Baardtrimmer ECG
- Baardtrimmer Imetec
- Baardtrimmer Izzy
- Baardtrimmer Orbegozo
- Baardtrimmer Scarlett
- Baardtrimmer Sinbo
- Baardtrimmer Trisa
- Baardtrimmer Carmen
- Baardtrimmer Conair
- Baardtrimmer Eldom
- Baardtrimmer Teesa
- Baardtrimmer Proficare
- Baardtrimmer Coline
- Baardtrimmer DCG
- Baardtrimmer Andis
- Baardtrimmer GA.MA
- Baardtrimmer Moser
- Baardtrimmer Aurora
- Baardtrimmer Orava
- Baardtrimmer Cecotec
- Baardtrimmer Steamery
- Baardtrimmer VS Sassoon
- Baardtrimmer Girmi
- Baardtrimmer Electroline
- Baardtrimmer Mybeo
Nieuwste handleidingen voor Baardtrimmer
27 Maart 2025
26 Maart 2025
26 Maart 2025
26 Maart 2025
26 Maart 2025
12 Maart 2025
12 Maart 2025
12 Maart 2025
12 Maart 2025
12 Maart 2025