Vortex Viper 10x28 Handleiding

Vortex Verrekijker Viper 10x28

Lees hieronder de đź“– handleiding in het Nederlandse voor Vortex Viper 10x28 (11 pagina's) in de categorie Verrekijker. Deze handleiding was nuttig voor 54 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/11
This Viper PST riflescope uses a second focal plane reticle.
This style of reticle always maintains the identical visual
size regardless of magnification. The advantage to this
style of reticle is that it will not become too large and
“heavy” at high magnifications.
Specifically designed for the military, law enforcement and
committed precision shooting communities, the Viper PST
Series riflescopes offer the highest levels of performance
and reliability. With features such as matched turret/reticle
subtensions, CRS zero stop mechanisms and precision
ranging reticles, the Viper PSTs are ready for any situation.
Vortex Viper PST riflescopes use a fast focus eyepiece designed
to quickly and easily
adjust the focus on the
riflescope’s reticle.
Once this adjustment is complete, it will not be necessary
to re-focus every time you use the riflescope. However,
because your eyesight may change over time, you should
re-check this adjustment periodically.
1. Look through the
riflescope at a blank white
wall or up at the sky.
2. Turn the eyepiece focus
knob in or out until the reticle image is as crisp as possible.
Note: Try to make this particular adjustment quickly, as the eye
will try to compensate for an out-of-focus reticle.
To adjust the reticle
focus:
Looking directly at the sun through a rifl escope, or any optical
instrument, can cause severe and permanent damage to your eyesight.
Dual Use: Shooting Tactical / Hunting
Vortex Viper PST riflescopes incorporate precision finger
adjustable elevation and windage
dials with audible clicks.
Depending on which version you have purchased, your Viper
PST riflescope will feature adjustments scaled in MOAs or
mrads. If you are unsure of which scale is used, reference the
top of the adjustment turret.
1. Turn the adjustment knob in the
appropriate direction: Up/Down
or Left/Right as indicated by the
arrows.
2. Move the knobs in the direction
you wish the bullet’s point-of-
impact to change.
To make adjustments:
If the adjustment is in MOAs,
the turret will display
“1 Click = ½ MOA”.
If the adjustment is in mrads,
the turret will display
“1 Click = .2 mrad”.
Both minute-of-angle (MOA) and milliradian (mrad) unit of
arc scales are effective when using subtension measurements for
ranging and bullet trajectory drop compensation in reticles.
Example: With each click of the Viper PST moving the point-of-impact
.2 mrad (.72 inches), four clicks will move the bullet’s point-of-impact
2.88 inches at a 100 yard sight-in distance. At 100 meters, four clicks
will move the point-of-impact eight centimeters.
Example: With each click of the Viper PST moving the point-of-impact
1/2 MOA, it will take four clicks of the knob to move a bullet’s point-of-
impact 2.10 inches at a 100 yard sight-in distance.
Mrad unit of arc measurements are based on the radian. A
radian is the angle subtended at the center of a circle by an
arc that is equal in length to the radius of the circle. There
are 6.283 radians in all circles and 1000 milliradian in a
radian for a total of 6283 milliradians (mrads) in a circle. An
mrad will subtend 3.6 inches at a distance of 100 yards. The
Viper PST 1–4x24 riflescope with mrad adjustments use
.2 mrad clicks which subtend .72 inches at 100 yards, 1.44
inches at 200 yards (4 cm at 200 meters), 2.16 inches at 300
yards (6 cm at 300 meters), etc.
MOA unit of arc measurements are based on degrees and
minutes. There are 360 degrees in a circle, 60 minutes in a
degree for a total of 21,600 minutes in a circle. A minute of
angle will subtend 1.05 inches at a distance of 100 yards. The
Viper PST 1–4x24 riflescope with MOA adjustments use
1/2-minute clicks which subtend .52 inches at 100 yards, 1.04
inches at 200 yards, 1.56 inches at 300 yards, etc.


Product specificaties

Merk: Vortex
Categorie: Verrekijker
Model: Viper 10x28
Kleur van het product: Groen
Gewicht: 340 g
Breedte: 114 mm
Hoogte: 119 mm
Waterdicht: Ja
Dichtstbijzijnde focus afstand: 2.29 m
Prisma type: Dak
Vergroting: 10 x
Objective diameter: 28 mm
Exit pupil: 2.8 mm
Oogafstand: 19 mm

Heb je hulp nodig?

Als je hulp nodig hebt met Vortex Viper 10x28 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Verrekijker Vortex

Handleiding Verrekijker

Nieuwste handleidingen voor Verrekijker