Vonyx WM552B Handleiding

Vonyx Microfoon WM552B

Lees hieronder de 📖 handleiding in het Nederlandse voor Vonyx WM552B (16 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/16

WM552B Wireless Microphone

Ref. nr.: 179.204

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

GEBRAUCHSANLEITUNG

MANUAL DE INSTRUCCIONES

MANUEL D'INSTRUCTIONS

INSTRUKCJA OBSŁUGI

NÁVOD K POUŽITÍ

V1.0

ENGLISH

Congratulations to the purchase of this Vonyx product. Please read this manual thoroughly prior to using the product in order to

benet fully from all features.

Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all precautions

to avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.

Keep the manual for future reference.

- Prior to using the product, please ask advice from a

specialist. When the product is switched on for the rst

time, some smell may occur. This is normal and will

disappear after a while.

- The product ntains voltage carrying parts. Therefore, co

do NOT open the housing.

- Do not place metal objects or pour liquids into the

product. This may cause electrical shock and

malfunction.

- Do not place the product near heat sources such as

radiators, etc. Do not place the product on a vibrating

surface. Do not cover the ventilation holes.

- The product not suitable for continuous us is e.

- Be careful with the mains lead and do not damage it. A

faulty or damaged mains lead can cause electrical shock

and malfunction.

- When unplugging the product from a mains outlet,

always pull the plug, never the lead.

- Do not plug or unplug the product th wet hands. wi

- If the plug and/or the mains lead are damaged, they

need to be replaced by a qualied technician.

- If the product is damaged to such an extent that internal

parts are visible, do NOT plug the product into a mains

outlet and DO NOT switch the unit on. Contact your

dealer. Do NOT connect the product to a rheostat or

dimmer.

- To avoid re and shock hazard, do not expose the

product to rain and moisture.

- All repairs should be carried out by a qualied technician

only.

- Connect the product to an earthed mains outlet (220-

240Vac/50Hz) protected by a 10- fuse. 16A

- During a thunderstorm or if the product will not be used

for a longer period of time, unplug it from the mains. The

rule is: Unplug it from the mains when not in use.

- If the product has not been used for a longer period of

time, condensation may occur. Let the unit reach room

temperature before you switch it on. Never use the

product in humid rooms or outdoors.

- To prevent accidents in companies, you must follow the

applicable guidelines and follow the instructions.

- Do not repeatedly switch the produ on and o. This ct

shortens the lifetime.

- Keep the product out of the reach of children. Do not

leave the product unattended.

- Do not use cleaning sprays to clean switches. The

residues of these sprays cause deposits of dust and

grease. In case of malfunction, always seek advice from

a specialist.

- Do not force the controls.

- his product is with speaker inside which can cause If t

magnetic eld. Keep the product at least 60cm away

from computer or TV.

- If this product has a built-in lead- id rechargeable ac

battery. Please recharge the battery every 3 months if

you are not going to use the product for a long period of

time. Otherwise the battery may be permanently

damaged.

- he battery is damaged, please replace with same If t

specications battery. And dispose the damaged battery

environment friendly.

- If the product has fallen, always have it checked by a

qualied technician before you switch the product on

again.

- Do not use chemicals to clean the unit. They damage the

varnish. Only clean the oduct with a dry cloth. pr

- Keep away from electronic equipment that may cause

interference.

- Only use original spares for repairs, otherwise serious

damage and/or dangerous radiation may occur.

- Switch the product o prior to unplugging it from the

mains and/or other equipment. Unplug all leads and

cables prior to moving the product.

- Make sure that the mains lead cannot be damaged when

people walk on it. Check the mains lead before every use

for damages and faults!

- The mains voltage is 220-240Vac/50Hz. Check if power

outlet match. If you travel, make sure that the mains

voltage of the country is suitable for this product.

- Keep the original packing material so that you can

transport the product in safe conditions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient

magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that p2-he should

read and adhere t o.

The product s been certied CE. It is prohibited to make any changes to the product. They would invalidate the CE certicate ha

and their guarantee!

NOTE: To make sure that the product will function normally, it must be used in rooms with a temperature between 5°C/ °41 F and

35 95°C/ °F .

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your

dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.

Specications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would also

invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the

warnings contained in this manual. Vonyx cannot be held responsible for personal injuries caused by a disrespect of the safety

recommendations and warnings. This is also applicable to all damages in whatever form.

UNPACKING INSTRUCTION

CAUTION! Carefully unpack the box on receipt. Check the contents to ensure that all parts are present and have been up

received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from

shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must be

returned, it is important that the product is returned in the original factory box and packaging.

If the device has been exposed to drastic temperature uctuat (e.g. after transportation), do not switch it on immediately. Tion he

arising condensation water might damage your device. Leave the device switched o until it has reached room temperature.

POWERSUPPLY

The label on the back/under side of the product indicates the mains ltage to which it must be connected. Check that the mains vo

voltage corresponds to this. Any other voltage than the one indicated may cause irreparable damage to the unit. The unit must

also be connected directly to the mains voltage and no dimmer or adjustable power supply may be used.

Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate

electrical ground to avoid the risk of electrocution or re.

OVERVIEW

1. DISPLAY

Display showing frequency, battery status and reception.

2. ON/OFF OLUME SWITCH BODYPACK / V

Rotate to turn the bodypack on/o or change the volume.

3. MICROPHONE INPUT

3.5mm microphone jack input.

4. SET

Press to manually sync the bodypack with the receiver.

5. BATTERY COMPARTMENT 2X AA 1.5VOLT

Compartment for 2x AA type batteries.

6. BATTERY COMPARTMENT 1X18650 3.7VOLT

Compartment for 1x18650 type battery.

7. /OFF SWITCH RECEIVER ON

Slide to turn the receiver on/o.

8. RF

Sync indicator. Shows pairing status.

9. USB CHARGE PORT

5V USB connector for charging the receiver battery. ’s

10. CHARGE INDICATOR

Indicator showing charge status.

11. ANTENNA

OPERATION

• Open the battery cover (6) of the microphone receiver and insert the supplied battery. Charge the battery of the receiver using

the supplied USB cable via USB charging port (9 ).

• Open the battery compartment lid of the bodypack and insert 2x AA 1.5Volt batteries (per bodypack) (5), note the polarity!

• Insert the receiver in a 6.3 mm microphone jack for example, a mixer, active speaker, amplier, etc. of,

• itch on the receiver (7) and microphone (2 Sw ).

• Synchronisation between microphone and receiver will initiate automatically.

• If the channel is busy or interfering, you can change it manually by pressing the button (4). SET

FIRST TIME PAIRING

• Turn o both receiver and bodypacks.

• Turn on the bodypack whil holding the button. st SET

• The display will start to ash. Release the switch (display will continue to ash).

• Turn on the receiver. The RF light will ash several times before staying lit. The receiver has briey made contact w h the it

microphone.

• Turn the microphone o and on again, the units should be paired.

Product specificaties

Merk:	Vonyx
Categorie:	Microfoon
Model:	WM552B

Heb je hulp nodig?

Als je hulp nodig hebt met Vonyx WM552B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Microfoon Vonyx

Vonyx CM300W Handleiding

4 December 2024

Vonyx WAT200 Handleiding

2 November 2024

Vonyx WM552B Handleiding

23 Augustus 2024

Vonyx CMS300S Handleiding

22 Augustus 2024

Vonyx CM320 Handleiding

24 Augustus 2023

Vonyx 179.206 WM73 Handleiding

6 Mei 2023

Vonyx CM300B Handleiding

9 Juni 2023

Vonyx WM73 Handleiding

6 Juni 2023

Vonyx STWM-Series Handleiding

6 Mei 2023

Vonyx 179.203 WM73C Handleiding

6 Mei 2023

Handleiding Microfoon

Nieuwste handleidingen voor Microfoon

Sennheiser A 9000 Handleiding

20 December 2024

Sony DWT-P30 Handleiding

18 December 2024

BOYA BY-M1000 Pro Handleiding

18 December 2024

PSC PowerStar RF Handleiding

17 December 2024

PSC RF Multi SMA Handleiding

17 December 2024

Power Dynamics PD210 Handleiding

15 December 2024

Power Dynamics PD220 Handleiding

15 December 2024

Behringer Go Cam Handleiding

14 December 2024

Behringer HM50 Handleiding

14 December 2024

Behringer BC444 Handleiding

14 December 2024