Vonyx ST-012 Handleiding

Vonyx Microfoon ST-012

Lees hieronder de 📖 handleiding in het Nederlandse voor Vonyx ST-012 (16 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/16

ST012 Personal PA Wireless System

UHF with bodypack

Ref. nr.: 178.870

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

GEBRAUCHSANLEITUNG

MANUAL DE INSTRUCCIONES

MANUEL D'INSTRUCTIONS

INSTRUKCJA OBSŁUGI

V1.2

ENGLISH

Congratulations to the purchase of this Vonyx product. Please read this manual thoroughly prior to using the unit in order to

beneﬁt fully from all features.

Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to

avoid ﬁre and/or electrical shock. Repairs must only be carried out by a qualiﬁed technician in order to avoid electrical shock.

Keep the manual for future reference.

- Prior to using the unit, please ask advice from a

specialist. When the unit is switched on for the ﬁrst time,

some smell may occur. This is normal and will disappear

after a while.

- The unit contains voltage carrying parts. Therefore do

NOT open the housing.

- Do not place metal objects or pour liquids into the unit

This may cause electrical shock and malfunction.

- Do not place the unit near heat sources such as

radiators, etc. Do not place the unit on a vibrating

surface. Do not cover the ventilation holes.

- The unit is not suitable for continuous use.

- Be careful with the mains lead and do not damage it. A

faulty or damaged mains lead can cause electrical shock

and malfunction.

- When unplugging the unit from a mains outlet, always

pull the plug, never the lead.

- Do not plug or unplug the unit with wet hands.

- If the plug and/or the mains lead are damaged, they

need to be replaced by a qualiﬁed technician.

- If the unit is damaged to such an extent that internal

parts are visible, do NOT plug the unit into a mains outlet

and DO NOT switch the unit on. Contact your dealer. Do

NOT connect the unit to a rheostat or dimmer.

- To avoid ﬁre and shock hazard, do not expose the unit to

rain and moisture.

- All repairs should be carried out by a qualiﬁed technician

only.

- Connect the unit to an earthed mains outlet (220-

240Vac/50Hz) protected by a 10-16A fuse.

- During a thunderstorm or if the unit will not be used for a

longer period of time, unplug it from the mains. The rule

is: Unplug it from the mains when not in use.

- If the unit has not been used for a longer period of time,

condensation may occur. Let the unit reach room

temperature before you switch it on. Never use the unit in

humid rooms or outdoors.

- To prevent accidents in companies, you must follow the

applicable guide lines and follow the instructions.

- Do not repeatedly switch the ﬁxture on and oﬀ. This

shortens the life time.

- Keep the unit out of the reach of children. Do not leave

the unit unattended.

- Do not use cleaning sprays to clean switches. The

residues of these sprays cause deposits of dust and

grease. In case of malfunction, always seek advice from

a specialist.

- Do not force the controls.

- his unit is with speaker inside which can cause If t

magnetic ﬁeld. Keep this unit at least 60cm away from

computer or TV.

- his unit is with built-in lead-acid rechargeable battery. If t

Please recharge the battery every 3 months if you are

not going to use the unit for a long period of time. Or the

battery may be damaged.

- If the battery is damaged please replace with same

speciﬁcations battery. And dispose the damaged battery

environment friendly.

- If the unit has fallen, always have it checked by a

qualiﬁed technician before you switch the unit on again.

- Do not use chemicals to clean the unit. They damage the

varnish. Only clean the unit with a dry cloth.

- Keep away from electronic equipment that may cause

interference.

- Only use original spares for repairs, otherwise serious

damage and/or dangerous radiation may occur.

- Switch the unit oﬀ prior to unplugging it from the mains

and/or other equipment. Unplug all leads and cables

prior to moving the unit.

- Make sure that the mains lead cannot be damaged when

people walk on it. Check the mains lead before every use

for damages and faults!

- The mains voltage is 220-240Vac/50Hz. Check if power

outlet match. If you travel, make sure that the mains

voltage of the country is suitable for this unit.

- Keep the original packing material so that you can

transport the unit in safe conditions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of suﬃcient

magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that he should

read and adhere to.

The unit has been certiﬁed CE. It is prohibited to make any changes to the unit. They would invalidate the CE certiﬁcate and

their guarantee!

NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and

35 95°C/ °F .

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your

dealer about the way to proceed. The speciﬁcations are typical. The actual values can slightly change from one unit to the other.

Speciﬁcations can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid

your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings

contained in this manual. Vonyx cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations

and warnings. This is also applicable to all damages in whatever form.

Description of the ampliﬁer:

1.Volume Control

2.Tone Control

3.Audio Inp ut

4.USB socket

5.Wired mic input

6.Power On/Oﬀ

A. Operation of the Ampliﬁer:

Firstly, make sure the ampliﬁer is available in the current power voltage.

1. Using AC power supply:

Connecting with AC power, please switch to POWER ON position,

and the power indicator turns green ,it shows the ampliﬁer works

normally(If suddenly AC power is cut oﬀ, the built in rechargeable will supply power automatically); –

2. Using DC power supply:

Switch to POWER ON position, and the power indicator turns green, it works normally, it has a low power warning set, if

it’s low battery, it will provides a “BEEP” sound to inform the users to charge the amplifier.

Caution: Please switch to POWER OFF position when you ﬁnish using the ampliﬁer, otherwise, it will inﬂuence battery life “ ”

span.

B. Operation of bodypack:

1. Open the cover, install the battery with correct polarity then close the battery cover.

2. Switch to ON position, the indicator ﬂash up then black out ,it means can work normally, please turn oﬀ the power after

using it.

3. The best way to set the volume half position and then you can adjust the volume you needs. in

Caution:

1. If the bodypack is ON, but the LED indictor is dim or oﬀ, it means the battery is low or you have placed the

battery wrong polarity.

2. Please take out the battery if you do not want to use it for a period.

Operation BT-Technology:

Press button to switch on the -function. Then use your mobile phone or computer to search a BT-device and “MODE” BT

connect the ST012 with your device.

TROUBLESHOOTING:

The problems might be

Reasons and Resolutions

The power indicator is dim

It indicates the battery low, please change to AC supply and

charge it immediately;

Hash Howl

1. Turn down the volume of ampliﬁer

2. Turn the tone control to Bass

3. Adjust the distant between ampliﬁer and microphone ,do not

face the speaker of ampliﬁer while using it

Noise

1. Battery low of the ampliﬁer or transmitter;

2. The microphone cord might be damaged;

3. Interference by same frequency (863.100MHz).

UHF

No license required (excluding geographical restrictions)

Belgium (BE), Denmark (DK), France (F), Finland (FI), Germany (DE), Hungary (HU), Italy (IT), Netherlands (NL), Norway (NO),

Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI), Spain (ES), Sweden (SE), Switzerland (CH), Great Britain (GB)

Product specificaties

Merk:	Vonyx
Categorie:	Microfoon
Model:	ST-012
Accu/Batterij voltage:	12 V
Ondersteund aantal accu's/batterijen:	1
Ingangsspanning:	220 - 240 V
Microfoontype:	Headset-microfoon
Frequentie:	863.1 MHz
Totale harmonische vervorming (THD):	0.1 procent
Receiver afmetingen (B x D x H):	285 x 160 x 175 mm
Ontvanger type:	Bodypack-ontvanger
Frequentierespons microfoon:	60 - 15000 Hz
Zendretype:	Handzender
Bedrijfsspanning (ontvanger):	12 V
Receiver gewicht:	3000 g