Vonyx SMWBA18 Handleiding

Vonyx Subwoofer SMWBA18

Lees hieronder de 📖 handleiding in het Nederlandse voor Vonyx SMWBA18 (8 pagina's) in de categorie Subwoofer. Deze handleiding was nuttig voor 64 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

170.758

170.760

SMWBA SERIES

BI-AMPLIFIED

ACTIVE SUBWOOFER

INSTRUCTION MANUAL

HANDLEIDING

MODE D’EMPLOI

BEDIENUNGSANLEITUNG

MANUAL DE INSTRUCCIONES

2 - 8

Basis aansluiting /Basic connections / Connexions de base / Grundanschlüsse / Conexiones básicas:

Control panel / Bedieningspaneel / Panneau de commande / Bedienfeld / Panel de control:

1 Microphone Echo Control

2 Microphone Volume

3 Treble Control

4 Bass Control

5 Sub. Volume

6 Master Volume

7 Microphone Input

8 Line Input

9 Aux Input

10 Aux Output

11 Satellite Speaker Outputs

Ordercode: 170.758 170.760

Type: SMWBA15 SMWBA18

kgTotal Output power 1 x 300W & 2 x 150W 1 x 500W & 2 x 250W

Speaker output impedance 8 Ohms Satellite 8 Ohms Satellite

Frequency range SUB 20 - 200 Hz 20 - 200 Hz

Frequency range TOPS 40 - 20kHz 40 - 20kHz

Woofer 15” 18”

Connector Input

Mic, 6.35 Jack, stereo

RCA

Mic, 6.35 Jack, stereo

RCA

Connector Output 2 speaker, stereo RCA 2 speaker, stereo RCA

Dimensions 520 x 450 x 420 mm 600 x 450 x 550 mm

Weight 27 29

3 - 8

SAFETY INSTRUCTIONS

Hearing damage: Loudspeakers are easily

capable of generating high sound pressure levels

(SPL) sufficient to cause permanent hearing

damage to performers, production crew and

audience members. Caution should be taken to

avoid prolonged exposure to SPL in excess of 90

dB.

Do not overload the box to avoid damage to the

speakers.

Do not place an open fire (candle, etc.) on top or

next to the box - FIRE HAZARD

Only connect to an earthed mains outlet of

230Vac/50Hz.

For indoor use only. If the box is used outdoors,

you need to make sure that no humidity can enter

the box.

When not in use, unplug the unit from the mains.

Unplug the unit from the mains prior to checking

or replacing the fuse.

Make sure that the box is placed on a stable,

strong surface.

The boxes can be stacked but do not put more

than 60kg weight on the box.

The boxes can be hung. Use only strong and

approved mounting material. During the mounting,

make sure that nobody is standing below the

mounting area.

Place the stand always on a flat, level, and stable

surface and that the legs do not present a trip

hazard.

Use only stands which are designed to support

the weight of the speaker. Do not attempt to place

more than one speaker on a stand designed for a

single speaker.

Route cables so that peoples will not trip over

them pulling the speaker over.

Do not place liquids on the box and protect it

against humidity. Humidity can shorten the life

time considerably.

Only use suitable means of transportation if you

want to move the box – BEWARE OF YOUR

BACK !!

If the unit is damaged to an extent that you can

see internal parts, do not plug the unit in a mains

outlet. In this case, please contact Tronios.

Always unplug the unit during a thunderstorm or

when it is not in use.

If the unit has not been used for a longer period of

time, condensation can occur inside the housing.

Please let the unit reach room temperature prior

to use.

Never try to repair the unit yourself. It does not

contain any user serviceable parts.

Run the mains lead in such a way that nobody

can fall over it and nothing can be put on it.

Only use the supplied mains lead or another lead

recommended by SkyTec.

Set the unit to the lowest volume prior to switching

it on

Keep the unit out of the reach of children.

Protect your environment. Recycle packing

material whenever possible.

Do not throw a faulty unit into normal

household waste but bring it to a special

collection point. A large part of it can be

recycled.

Make sure that the subwoofer and audio source (mixer, CD player, etc.) are switched off prior to making the

connections. Connect the line output of your audio source to the line input (7) of the subwoofer. The

connections must be made firmly to prevent noise. If you want to connect a second active speaker or

subwoofer, you can connect it to the line output (6). Connect the mains lead to the IEC socket (2) and the other

end to a normal mains outlet. Turn the volume control (5) fully counter clockwise to the lowest level. Switch the

audio source on at first and then the subwoofer (1). Set the lter frequency (3) to the frequency range that suits

your satellite speakers. Turn to the left for less basses and to the right for more basses. Finally set the volume

(5). Turn to the left for lower volume and to the right for higher volume. If the sound of the subwoofer is not in

phase with the satellite speakers, you can turn it at 180° via switch (4).

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would

also invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or

disrespect of the warnings contained in this manual. Tronios cannot be held responsible for personal injuries caused by a

disrespect of the safety recommendations and warnings. This is also applicable to all damages in whatever form.

Product specificaties

Merk:	Vonyx
Categorie:	Subwoofer
Model:	SMWBA18
Kleur van het product:	Zwart
Gebruikershandleiding:	Ja
Type stroombron:	AC
Microfoon, line-in ingang:	Ja
Impedantie:	8 Ohm
Gemiddeld vermogen subwoofer:	1000 W
Diameter driver subwoofer (imperiaal):	18 "
Lijningang:	Ja
Handvat(en):	Ja
Subwoofertype:	Actieve subwoofer
Frequentiebereik subwoofer:	20 - 20000 Hz
Breedte van de subwoofer:	550 mm
Hoogte van de subwoofer:	600 mm
Diepte van de subwoofer:	410 mm
Gewicht subwoofer:	24300 g
AC-ingangsspanning:	220-240 V
Line inputs (RCA):	1