Vonyx RL20 Handleiding

Vonyx Microfoon RL20

Lees hieronder de 📖 handleiding in het Nederlandse voor Vonyx RL20 (12 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

RL20 Ringlamp + Tablestand

Ref. nr.: 188.221

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

GEBRAUCHSANLEITUNG

MANUAL DE INSTRUCCIONES

MANUEL D'INSTRUCTIONS

V1.0

ENGLISH

Congratulations to the purchase of this Vonyx product. Please read this manual thoroughly prior to using the product in order to

benet fully from all features.

Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all precautions

to avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.

Keep the manual for future reference.

- Prior to using the product, please ask advice from a

specialist. When the product is switched on for the rst

time, some smell may occur. This is normal and will

disappear after a while.

- The product contains voltage carrying parts. Therefore do

NOT open the housing.

- Do not place metal objects or pour liquids into the

product. This may cause electrical shock and

malfunction.

- Do not place the product near heat sources such as

radiators, etc. Do not place the product on a vibrating

surface. Do not cover the ventilation holes.

- The product is not suitable for continuous use.

- Be careful with the mains lead and do not damage it. A

faulty or damaged mains lead can cause electrical shock

and malfunction.

- When unplugging the product from a mains outlet,

always pull the plug, never the lead.

- Do not plug or unplug the product with wet hands.

- If the plug and/or the mains lead are damaged, they

need to be replaced by a qualied technician.

- If the product is damaged to such an extent that internal

parts are visible, do NOT plug the product into a mains

outlet and DO NOT switch the unit on. Contact your

dealer. Do NOT connect the product to a rheostat or

dimmer.

- To avoid re and shock hazard, do not expose the

product to rain and moisture.

- All repairs should be carried out by a qualied technician

only.

- During a thunderstorm or if the product will not be used

for a longer period of time, unplug it from the mains. The

rule is: Unplug it from the mains when not in use.

- If the product has not been used for a longer period of

time, condensation may occur. Let the unit reach room

temperature before you switch it on. Never use the

product in humid rooms or outdoors.

- To prevent accidents in companies, you must follow the

applicable guide lines and follow the instructions.

- Do not repeatedly switch the produ on and o. This ct

shortens the life time.

- Keep the product out of the reach of children. Do not

leave the product unattended.

- Do not force the controls.

- If the product has fallen, always have it checked by a

qualied technician before you switch the product on

again.

- Do not use chemicals to clean the unit. They damage the

varnish. Only clean t product with a dry cloth. he

- Keep away from electronic equipment that may cause

interference.

- Only use original spares for repairs, otherwise serious

damage and/or dangerous radiation may occur.

- Switch the product o prior to unplugging it from the

mains and/or other equipment. Unplug all leads and

cables prior to moving the product.

- Keep the original packing material so that you can

transport the product in safe conditions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient

magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that p2-he should

read and adhere to.

The product has been certied CE. It is prohibited to make any changes to the product. They would invalidate the CE certicate

and their guarantee!

NOTE: To make sure that the product will function normally, it must be used in rooms with a temperature between 5°C/ °41 F and

35 95°C/ °F .

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your

dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.

Specications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would also

invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the

warnings contained in this manual. Vonyx cannot be held responsible for personal injuries caused by a disrespect of the safety

recommendations and warnings. This is also applicable to all damages in whatever form.

UNPACKING INSTRUCTION

CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are

present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if

any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing

materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original

factory box and packing.

If the device has been exposed to drastic temperature uctuation (e.g. after transportation), do not switch it on immediately. The

arising condensation water might damage your device. Leave the device switched o until it has reached room temperature.

S TING ET UP

1. Fixate the conically shaped bottom end of the column tube tightly in the base of the stand.

2. Attach phone holders to the phone stand by tightening the screws, then xate the phone stand on top of the column

tube. Finally, xate the ring lamp on top of the phone stand by tightening the mounting screw. fi

3. When using a microphone: Insert the microphone stand into the microphone clamp before attaching the clamp to the

column tube.

CONTROLS

1. ON/OFF

Press this button to turn on/o the ring lamp lighting.

2. COLOR TEMPERATURE

Switch color temperatures by pressing this button. Three

options are available: warm, natural and cool. Warm is set

as default temperature.

3. BRIGHTNESS

Press the + or - buttons to change the brightness of the “ ” “ “

emitted light. 10 increments of brightness are available.

Product specificaties

Merk:	Vonyx
Categorie:	Microfoon
Model:	RL20
Kleur van het product:	Zwart
Gewicht:	1400 g
Hoogte:	600 mm
Diameter:	160 mm
Lamptechnologie:	LED

Heb je hulp nodig?

Als je hulp nodig hebt met Vonyx RL20 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Microfoon Vonyx

Vonyx WAT200 Handleiding

2 November 2024

Vonyx WM552B Handleiding

23 Augustus 2024

Vonyx CMS300S Handleiding

22 Augustus 2024

Vonyx CM320 Handleiding

24 Augustus 2023

Vonyx 179.206 WM73 Handleiding

6 Mei 2023

Vonyx CM300B Handleiding

9 Juni 2023

Vonyx WM73 Handleiding

6 Juni 2023

Vonyx STWM-Series Handleiding

6 Mei 2023

Vonyx 179.203 WM73C Handleiding

6 Mei 2023

Vonyx 179.209 WM73H Handleiding

6 Mei 2023

Handleiding Microfoon

Nieuwste handleidingen voor Microfoon

Vicoustic Flexi Screen Lite V.2 Handleiding

20 November 2024

Microtech Gefell M 320 Handleiding

19 November 2024

Microtech Gefell M 300 Handleiding

19 November 2024

Microtech Gefell M 960 Handleiding

19 November 2024

Microtech Gefell M 950 Handleiding

19 November 2024

Microtech Gefell M 940 Handleiding

19 November 2024

Microtech Gefell UM 930 Handleiding

19 November 2024

Microtech Gefell M 930 Handleiding

19 November 2024

Microtech Gefell M 900 Handleiding

19 November 2024

Microtech Gefell M 1030 Handleiding

19 November 2024