Vivotek FD9365-HTVL Handleiding
Vivotek
security camera
FD9365-HTVL
Lees hieronder de 📖 handleiding in het Nederlandse voor Vivotek FD9365-HTVL (23 pagina's) in de categorie security camera. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/23
VIVOTEK
User's Manual - 1
Smart Motion Detection
User Guide
The traditional motion detection relies heavily on the detection of pixel changes or motion
vectors, and false alarms can be triggered by swaying trees, clouds floating by, or even the
appearance of little animals. The Smart Motion detection, with Human detection and tunable
time î‚¿lter, can eliminate the defects of traditional motion detection and facilitate the conî‚¿guration
at a surveillance site.
A key feature in the Smart Motion detection is the Human detection. Based on a human
silhouette database and the rapid responses via an artificial neural network technology, the
Smart engine instantly recognizes human appearances in a video surveillance area. Since
humans are the objects of interest in the majority of video surceillance, the Human detection
feature enables users to quickly conî‚¿gure his installation.
With Human detection, light changes or swaying vegetation, vehicles passing by, or animal
activities in the scene are not taken as event triggers. Only human activities will trigger an event.
This helps reduce false alarms and the time and efforts for a camera conî‚¿guration.
Swaying trees
Vehicles passing by
Moving shadows
Non-human
moving objects
Human
detected as objects of interest
The activity data collected by the camera is displayed in comprehensive graphs and bar charts.
You can monitor and compare the historical data acquired through a span of time and î‚¿ne-tune
the detection parameters with the ease of use of a graphical interface.
VIVOTEK
2 - User's Manual
Applicable Cameras:
Please refer to VIVOTEK’s VCA package and camera documentation on the website.
The majority of VIVOTEK’s latest camera models will come embedded with this utility.
Revision History
â– Rev. 1.0: Initial release
â– Rev. 1.1:
* The Human Detection feature can be enabled/disabed on each individual motion window.
* Supports conî‚¿guration in the MS9390 panoramic î‚¿eld of view.
* If the Motion window is located outside of the optimal human detection area, the Human
Detection feature checkbox is automatically disabled.
* Motion window statuses have been adjusted. See page 17.
Requirements for Running the Smart Motion Detection:
1. The embedded video tracking and counting analysis requires a monitoring session on
Microsoft IE 10 or IE 11 browser.
If you open a console with a non-IE browser, the Smart Motion stream must be
conî‚¿gured to be streaming in MJPEG.
2. Lens cleanliness is also required because dust spots or smears on dirty lens can
produce miscalculation of pixels, correlation, and movements.
3. For other installation concerns, please refer to page 9, Considerations.
4. Avoid glass and reective materials, such as aluminum foils, in the eld of view. If
unavoidable, you can use the Exclusive area settings to get rid of the side effects.
5. Make sure the camera is installed appropriately above the area of your interest, e.g.,
an entrance to building. Installation at an extremely busy area, e.g., a square or cross
road section with dozens of passengers per minute, may not apply due to the system
computing load.
6. Due to the system load, do not open two conî‚¿guration web consoles at the same time.
IMPORTANT:
The effectiveness of the Smart Motion detection slightly diminishes for objects lower than
130cm, such as children.
NOTE:
VIVOTEK
User's Manual - 3
Considerations
Note the following when planning the camera installation:
1. The installation site must be adequately lighted for optimal accuracy with video
detection.
2. In the night mode, conî‚¿gure a schedule proî‚¿le for the different lighting condition. In the
night mode, the Smart Motion works if additional lighting is provided, e.g., using the on-
board IR light.
Installation
height
Measured to the
approx. lens position.
Not to the ceiling.
6.5cm
3. Make sure you measure the height of your camera. The height information is important
for the accuracy of the video analytics results. Some of the other perspective
information are automatically collected by the onboard S-sensor. The height information
enables the horizontal and vertical keystone corrections of the î‚¿eld of view. Measure
the distance between camera lens and the ground.
Product specificaties
| Merk: | Vivotek |
| Categorie: | security camera |
| Model: | FD9365-HTVL |
Heb je hulp nodig?
Als je hulp nodig hebt met Vivotek FD9365-HTVL stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding security camera Vivotek
5 Juli 2023
Handleiding security camera
Nieuwste handleidingen voor security camera
8 Juli 2023
11 Juni 2023
29 Mei 2023
27 Mei 2023