Vivotek AW-GET-083A-120 Handleiding

Vivotek Niet gecategoriseerd AW-GET-083A-120

Lees hieronder de đź“– handleiding in het Nederlandse voor Vivotek AW-GET-083A-120 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 208 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
10/100/1000 RJ45
data ports
100/1000 SFP ports
DC input
LEDs
VAC 100~240 power input 10/100/1000 RJ45
PoE ports
1. Install the PoE switch in a ventilated and dry place that is free of electromagnetic source, vibration, moisture, and dust.
2. Make sure the ventilation openings on the switch are not blocked.
3. Use CAT5 or 5e UTP/STP cables.
4. AC input (100~240V/AC, 50~60Hz), for a max. consumption of 150W.
IMPORTANT:
INTRODUCTION
LED DEFINITIONS
CONNECTION
* 1x PoE switch * 1x Quick Installation Guide
* 1x T30 L-wrench, 4x wall anchors
PACKAGE CONTENTS
Power1 Green ON Power is on and normal.
Green Off The switch is not receiving power.
Power2 Green ON Power is on and normal.
Green Off The switch is not receiving power.
RJ45 ports
LED1
Green ON Port is enabled and link established with a device at the 1000Mbps speed.
Grren Blinking Port is transmitting and receiving data at the 1000Mbps speed.
Amber ON Port is enabled and link established with a device at the10/100Mbps speed.
Amber Blinking Port is transmitting and receiving data at the 100Mbps speed.
Off No active network connection. The port may have been disabled through user interface.
RJ45 ports
LED2
Green ON The port is enabled and supplying power to connected device.
Amber ON An abnormal state, such as overload status has occurred.
Off T t t t k c ct , it is t c t a PoE PD vice. Ot se, t t e he por has no ac ive ne wor cable onne ed or no onnec ed de herwi he por may hav
been disabled through the switch user interface.
SFP ports Green ON Port is enabled and link established with a device at the 1000Mbps speed.
Grren Blinking Port is transmitting and receiving data at the 1000Mbps speed.
Off No active network connection. The port may have been disabled through user interface.
AW-GET-083A-120
Quick Installation Guide
The AW-GET-083A-120 is a 4 port 10/100/1000BaseT PoE switch capable of feeding 15.4/30W (54V max. per port)
power to Power over Ethernet (PoE) devices. It comes with another 2x GbE Ethernet and 2x GbE SFP port. The switch is
capable of a total of 120 Watts PoE power budget.
Outdoor PoE Switch
Port LED1 Port LED2
RESET
Reset the switch Hold Reset Button 2 seconds All LEDs On/Off
VIVOT I .EK NC
6F, N .192, L d., C , Ne , 235, , R.O.Co ien-Cheng R hung-Ho w Taipei City Taiwan .
|T: + 6-88 2-82455282|F: + 2886-2-8245553 |E: sale vivo k.coms@ te
VI T A .VO EK US , INC
2050 ingwooR d Aven e, S n J se, CA 9513u a o 1
|T: 408-773-8686 |F: 408-773-8298 |E: s sus iv om ale a@v otek.c
VIVOT peEK Euro
Ra ad Almer h t rla sndst 22-133, 1316BW e, T e Ne he nd
T: + (0) 31 36-5298-434E: s tek .c omsale europe@vivo
Copyright © 2017 VIVOTEK INC. All rights reserved.
Use the included M10 hex socket screws to secure the power box to a pole-mount or corner mount bracket.
3/4” conduit
AM-314
AM-315
AM-414
M10
Outdoor PoE switch:
AW-GEU-083A-240
AW-GET-083A-120
AW-GET-123A-240
AW-GEU-086A-240
AW-GET-086A-120
AW-GET-126A-240
mount brackets.
INSTALLATION
1. If the need should arise for connecting two outdoor switches, use the uplink ports #5 ~ #8. If you use PoE ports for
cross-switch connections, the 12KV surge protection will not apply.
IMPORTANT:
1.5m
2. The cabinet must be grounded using a ground wire between the
ground screw and earth ground.


Product specificaties

Merk: Vivotek
Categorie: Niet gecategoriseerd
Model: AW-GET-083A-120

Heb je hulp nodig?

Als je hulp nodig hebt met Vivotek AW-GET-083A-120 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Vivotek

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd