Vitek VTM-LCD43TA Handleiding

Vitek Monitor VTM-LCD43TA

Lees hieronder de 📖 handleiding in het Nederlandse voor Vitek VTM-LCD43TA (4 pagina's) in de categorie Monitor. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
VITEK
FEATURES
• 4.3” 480x272 Pixel LCD Screen
• Supports HD-TVI, AHD, and CVBS Cameras
• 800mA 12VDC Power Output to Power Camera
• Coaxitron Support
• Internal 4400mAH Lithium Ion Extended Life
Battery
VTM-LCD43TA
3-in-1 4.3” LCD Service Monitor
Supporting HD-TVI, AHD, and
CVBS Cameras
2
1
2
3
4
5
3
Layout:
1. Video Input / 12VDC Power Output
2. Power Button / Video Input Selection
3. 5VDC Power Input (Mini USB)
4. Charge LED
5. CoC (Control over Coax)
Operation:
1. Remove Test monitor from packaging
2. Connect supplied charging cable to test monitor (right side)
and plug-in transformer to charge the battery the Blue LED
will illuminate when monitor is charging
3. After battery is charged connect the test lead to the top of the
test monitor
4. Connect TVI/AHD camera to the RED connector on test lead
or Analog camera to the YELLOW lead
5. Slide switch on right side of test monitor to HD for TVI/AHD
cameras or CVBS for Analog cameras
6. To power camera via the test monitor use the power adaptor
on the test lead (12VDC 800mA MAX)
7. If camera has CoC (Control over Coax) press Menu button
to access the OSD of camera and use arrow buttons to
navigate through OSD


Product specificaties

Merk: Vitek
Categorie: Monitor
Model: VTM-LCD43TA

Heb je hulp nodig?

Als je hulp nodig hebt met Vitek VTM-LCD43TA stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Monitor Vitek

Handleiding Monitor

Nieuwste handleidingen voor Monitor