Vitek VTD-VH412VP4 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Vitek VTD-VH412VP4 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 11 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
VTD-VH49VP4
Vandal Proof Color Varifocal Dome Camera
Vandal Proof Color Vari Focal Dome Specifications
VTD-VH49VP4
USER’S MANUAL
Image Device
Effective Pixels
Resolution
Minimum Illumination
S/N Ratio
Video Output
Auto Gain Control
Sync. System
White Balance
BLC
Scanning System.
Electronic Shutter
Standard Lens
Operation Temperature
Camera Dimensions
Weight
Power Supply
1/3" Sony Super HAD CCD Sensor
768 (H) X 494 (V)
More Than 480 Horizontal Tv Lines
0.7 Lux At F1.2 (AGC Off)
More Than 48db (AGC Off)
Composite Output 1.0 Vp-P/75Ω
Built-In (On)
Line Lock Only
Auto White Balance
Built-In (On)
2:1 Interlace / 525lines / 60fields / 30frames
1/60 ~ 1/100,000 Sec
Direct Drive A/I with 4-9mm Focal Range
-10 ~ 50 C (14 ~ 122 F)° ° ° °
3.96" (H) X 6.42" (OD) / (100.4mm X 163mm)
26.46 Oz. / 750 g. / 1.65 Lbs.
AC 110 60 Hz (Input Power) / AC 24V 500 mA (Output Power)
VITEK INDUSTRIAL VIDEO PRODUCTS, INC.
9970 GLENOAKS BLVD. UNIT B SUN VALLEY, CA 91352
PHONE: 888-VITEK-70 818-771-0300 FAX: 818-771-0400
WWW.VITEKCCTV.COM
9970 GLENOAKS BLVD. UNIT B SUN VALLEY, CA 91352
PHONE: 888-VITEK-70 818-771-0300 FAX: 818-771-0400
WWW.VITEKCCTV.COM
INDUSTRIAL VIDEO PRODUCTS, INC.
INDUSTRIAL VIDEO PRODUCTS, INC.
SAFETY CONSIDERATIONS:
• Don't touch the CCD Chip with your fingers.
• Use the camera only with 24 VAC power supply.
• Use a monitor with 75 ohm impedance.
INSTALLATION STEPS:
1) Mount the camera securely.
2) Connect video using suitable coaxial cable with BNC-connector.
3) Connect the camera to a 24 VAC power supply.
CAUTION
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
12VDC Power Input Is Not Polarity Protected.
Use extreme caution when connecting 12VDC power to unit.
Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or cover. There
are no user-serviceable parts inside. Refer servicing to qualified
service personnel.
Handle the camera with care.
Do not abuse the camera. Avoid striking or shaking it. The camera
could be damaged by improper handling or storage.
Do not expose the camera to rain or moisture, or try to
operate it in wet areas.
Take immediate action if ever the camera does become wet.
Turn power off and refer servicing to qualified service personnel.
Moisture can damage the camera and also create the danger of
electric shock.
Never face the camera toward the sun.
Whether the camera is in use or not, never face it toward the
sun. Use caution when operating the camera in the vicinity of
spot lights or other blight lights and light reflecting
objects.
Do not operate the camera beyond its temperature or power
source ratings.
Do not use the camera in an extreme environment where high
temperature or high humidity exist. Use the camera under
conditions where temperatures are within - 10°C~+50°C.
Do not touch the CCD sensor directly with your fingers.
If necessary, use soft cloth moistened with alcohol to wipe off
the dust.
PRECAUTIONS INSTALLATION


Product specificaties

Merk: Vitek
Categorie: Niet gecategoriseerd
Model: VTD-VH412VP4

Heb je hulp nodig?

Als je hulp nodig hebt met Vitek VTD-VH412VP4 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Vitek

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Festo

Festo VPPI Handleiding

21 November 2024
Festo

Festo SFAB Handleiding

21 November 2024
Festo

Festo SFAH Handleiding

21 November 2024
Festo

Festo DRRD-12 Handleiding

21 November 2024
Festo

Festo SDE3 Handleiding

21 November 2024
Festo

Festo SFTE Handleiding

21 November 2024
Festo

Festo CRVZS-5 Handleiding

21 November 2024