Vitek VTD-TTAD24R2F Handleiding

Vitek Niet gecategoriseerd VTD-TTAD24R2F

Lees hieronder de đź“– handleiding in het Nederlandse voor Vitek VTD-TTAD24R2F (12 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
VITEK
VITEK
FEATURES
• 1/3” 2.1 MegaPixel CMOS Sensor
• HD-TVI & AHD/CVBS Video Output
• 3.6mm Fixed Iris Lens (VTD-TTAD24R2F) / 2.8~12mm
Varifocal Lens (VTD-TTAD30R2V)
• 24 Infrared LED’s with 70’ IR Range (VTD-TTAD24R2F) /
30 Infrared LED’s with 100’ IR Range (VTD-TTAD30R2V)
• Digital Wide Dynamic Range (D-WDR)
• True Mechanical Day/Night function by ICR
• 3D-DNR Noise Reduction
• IP66 Weather Resistance
• Supports Up The COAX Control
• Over 1500’ HD Video Transmission (Depending on cable
characteristics and integrity)
• 12VDC Operation
VTD-TTAD24R2F
VTD-TTAD30R2V
2.1 Megapixel Outdoor HD-TVI/
AHD/CVBS IR Dome Cameras
2
Safety Precaution
CAUTION: TO REDUCE THE RISK OF ELECTICAL
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
To prevent electrical shock and risk of fire hazards, do not expose this unit
to rain or moisture and only use specified power source..
Warning :
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
their own expense.
Caution :
Any changes or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user's authority
to operate the equipment.
Main power quality should be that of a typical commercial environment. If the user
of the model requires continued operation during power interruptions, it is
recommended that the device be powered from an uninterruptible power supply
(UPS).
The symbol is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature
accompanying the unit.
The symbol is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electrical shock.
3
7
8
9
10
1
2
Components and Accessories
Overview
Camera
User Manual
Drill Template
Screws
Hex Wrench
Lower Dome
Lens
HD-TVI Output
AHD/CVBS Output
Power Cable
Focus
Zoom
Lock Screw
1
2
3
4
5
6
7
8
3
4
5
6


Product specificaties

Merk: Vitek
Categorie: Niet gecategoriseerd
Model: VTD-TTAD24R2F

Heb je hulp nodig?

Als je hulp nodig hebt met Vitek VTD-TTAD24R2F stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Vitek

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Festo

Festo VPPI Handleiding

21 November 2024
Festo

Festo SFAB Handleiding

21 November 2024
Festo

Festo SFAH Handleiding

21 November 2024
Festo

Festo DRRD-12 Handleiding

21 November 2024
Festo

Festo SDE3 Handleiding

21 November 2024
Festo

Festo SFTE Handleiding

21 November 2024
Festo

Festo CRVZS-5 Handleiding

21 November 2024