Vitek VTD-TND24R3F2 Handleiding

Vitek Niet gecategoriseerd VTD-TND24R3F2

Lees hieronder de 📖 handleiding in het Nederlandse voor Vitek VTD-TND24R3F2 (48 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 52 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/48

VITEK

FEATURES

• 3, 4, or 5 Megapixel Progressive Scan CMOS image sensors

• Up to 30fps live viewing

• Fixed, Varifocal, and Motorized Lens

• Infrared LED’s with up to 150’ IR Range

• Optional Advanced Starlight Technology Offers Dramatically Higher

Sensitivity to Light Producing Color Images in Very Dark & Night

Scenes (5 MegaPixel Versions)

• Digital Wide Dynamic Range (D-WDR)

• True Mechanical Day/Night function by ICR

• XD-DNR (2D-DNR & 3D-DNR) Noise Reduction

• On Board Motion Detection

• H.265/H.264/MJPEG Triple Streaming

• Secondary Video Output (CVBS)

• Remote Viewing via CMS, Internet Explorer, and iOS & Android

Apps

• Minimal Latency with up to 10 simultaneous user connections

• IP66 Weather Resistance

• MicroSD memory card slot for Local recording supporting up to

128GB MicroSDXC cards (Select Models)

• ONVIF Compliant

• Optional Mounts Available

• 12VDC & PoE (Power over Ethernet) Operation

IP Camera Series

Transcendent Series 3, 4, and 5

Megapixel H.265 WDR IP Cameras

with IR LED Illumination

PLEASE NOTE:

Documentation, Software, Tools, and Updates are available online.

Scan the QR Code or visit:

http://www.vitekcctv.com/Downloads

Please read this manual carefully for correct use of the product.

Notes

! Please use the specified power supply to connect.

! Do not attempt to disassemble the camera; in order to prevent electric

shock, do not remove screws or covers.

! -There are no user serviceable parts inside. Please contact the nearest

service center as soon as possible if there is any failure.

! Avoid incorrect operation, shock vibration, heavy loads which can cause

damage to the camera.

! Do not use corrosive detergent to clean body of the camera. If

necessary, please use soft dry cloth to wipe dirt; for hard contamination,

use neutral detergent. Any cleanser for high grade furniture is

applicable.

! Avoid aiming the camera directly towards extremely bright objects, such

as the sun, this may damage the image sensor.

! Please follow the instructions to install the camera.

! Do not operate it incase temperature; humidity and power supply are

beyond the limited stipulations.

! Keep away from heat sources such as radiators, heat registers, stove,

etc.

! Do not expose the product to the direct airflow from an air conditioner.

! We may reserve the rights to amend typographical errors,

inconsistencies with the latest version, software upgrades and product

improvements, interpretation and modification. These changes will be

published in the latest version without special notification.

! The pictures and screenshots in this manual are only used to explain

the usage of our product. The ownerships of trademarks, logos and

other intellectual properties related to Microsoft, Apple and Google

belong to the above-mentioned companies.

! This manual is suitable for IR weather-proof network camera. All

pictures and examples used in the manual are for reference only. .

Table of Contents

1 IE Remote Access.................................................................................... 4

1.1 ............................................................................... LAN 4

1.1.1 Access through IP-Tool ............................................ 4

1.1.2 Directly Access through IE ....................................... 6

1.2 WAN .............................................................................. 7

2 Remote Preview ....................................................................................... 8

2.1 The Remote Preview Interface .................................... 8

2.2 Record Playback ........................................................ 10

2.3 Snap Pictures .............................................................. 11

3 Remote Configuration ........................................................................... 12

3.1 ............................................... System Configuration 12

3.1.1 Basic Information .................................................... 12

3.1.2 Date & Time Configuration ..................................... 12

3.1.3 SD Card .................................................................. 13

3.2 .................................................. Video Configuration 13

3.2.1 Camera Configuration ............................................ 14

3.2.2 Video Stream .......................................................... 14

3.2.3 OSD Configuration ................................................. 16

3.2.4 Video Mask ............................................................. 16

3.2.5 ROI Configuration ................................................... 17

3.3 Alarm Configuration .................................................. 18

3.3.1 Motion Detection Area ............................................ 18

3.3.2 Motion Detection Trigger ........................................ 19

3.3.3 Motion Detection Schedule .................................... 20

3.3.4 Alarm Input Trigger ................................................. 21

3.3.5 Alarm Input Schedule ............................................. 21

3.3.6 Alarm Out ............................................................... 22

3.3.7 .......................................................... Alarm Server 22

3.4 Network Configuration .............................................. 22

3.4.1 Port ......................................................................... 22

3.4.2 IP Address .............................................................. 23

3.4.3 Server Configuration .............................................. 23

3.4.4 IP Notify .................................................................. 24

3.4.5 DDNS Configuration ............................................... 24

3.4.6 RTSP ...................................................................... 26

3.4.7 UPnP ...................................................................... 26

3.4.8 Mail Setting ............................................................. 26

Product specificaties

Merk:	Vitek
Categorie:	Niet gecategoriseerd
Model:	VTD-TND24R3F2

Heb je hulp nodig?

Als je hulp nodig hebt met Vitek VTD-TND24R3F2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Vitek

Vitek VT-EH4 Handleiding

8 Juli 2024

Vitek VT-EH8 Handleiding

9 Juni 2024

Vitek VT-EH16 Handleiding

9 Juni 2024

Vitek VTD-AR2812/I Handleiding

9 Juni 2024

Vitek VTD-A2812/V Handleiding

9 Juni 2024

Vitek VTD-AR2812/V Handleiding

9 Juni 2024

Vitek VTC-C770DN Handleiding

9 Juni 2024

Vitek VTC-IRH70/650 Handleiding

9 Juni 2024

Vitek VTC-BHOC6R2812 Handleiding

16 Juni 2023

Vitek VT-H160 Handleiding

16 Juni 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Xblitz R8 Power Charge Handleiding

3 December 2024

Xblitz R4 Power Handleiding

3 December 2024

Franke Urban UBG 610-78 Handleiding

3 December 2024

Franke ANX211RHD Handleiding

3 December 2024

Franke ANX220 Handleiding

3 December 2024

Dell NX3330 Handleiding

3 December 2024

Dell PowerConnect B-DCX-4s Handleiding

3 December 2024

Hager AKB83000701 Handleiding

3 December 2024

Hager AKB81500402 Handleiding

3 December 2024

Hager AKBA1500401V Handleiding

3 December 2024