Vitek VTD-HOCR6E2812V Handleiding

Vitek Niet gecategoriseerd VTD-HOCR6E2812V

Lees hieronder de 📖 handleiding in het Nederlandse voor Vitek VTD-HOCR6E2812V (28 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28
VITEK
VITEK
FEATURES:
1/2.9” Sony® Progressive Scan CMOS (IMX222)
2.1 MegaPixel with Full 1080p/720p HD-SDI (SMPTE292M) /
EX-SDI Output
Six (6) High Power 850nm IR LEDs with up to 160’ foot range
MegaPixel IR Corrected 2.8-12mm Varifocal Lens Included
Mechanical IR Cut Filter (True Day/Night)
16:9 Video Format
Advanced OSD Functions: Motion Detection, Sharpness, Gamma,
Mirror, Flip, DSS, Freeze, D-Zoom, ACE, WDR, 3D-DNR, Defog,
Privacy, HLM
100% Pure Digital Transmission of video data
Up to 1000’ HD Transmission Range (Depending on cable
characteristics and integrity)
IP68 Weather Resistance
12VDC/24VAC Dual Voltage Operation
Available in Ivory or Black
VTD-HOCR6E2812-V
2.1MP HD-SDI / EX-SDI IP68 Vandal
Resistant WDR IR Varifocal Dome Camera
2
Safety Precaution
CAUTION: TO REDUCE THE RISK OF ELECTICAL
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
To prevent electrical shock and risk of fire hazards, do not expose this unit
to rain or moisture and only use specified power source..
Warning :
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
their own expense.
Caution :
Any changes or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user's authority
to operate the equipment.
Main power quality should be that of a typical commercial environment. If the user
of the model requires continued operation during power interruptions, it is
recommended that the device be powered from an uninterruptible power supply
(UPS).
The symbol is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature
accompanying the unit.
The symbol is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electrical shock.
3
Safety Precaution
NOTICE
The image used in this instruction manual are processed to help
comprehension and may differ from actual video of the camera.
Avoid installing in areas where shock or vibration may occur.
Pay attention to safety when running the connection cables and
make sure that the cables are not subject to heavy loads, kinks,
moisture or damage.
Never open the device (no user serviceable parts inside). The
warranty becomes void if repairs are undertaken by
unauthorized persons.
Maintenance and repair have to be carried out only by authorized
service centers.
Use only a mild detergent to clean the housing.
The camera should never be operated beyond the technical
specifications. This can lead to damaging the device and void
the warranty.
The camera should never be operated in water.


Product specificaties

Merk: Vitek
Categorie: Niet gecategoriseerd
Model: VTD-HOCR6E2812V

Heb je hulp nodig?

Als je hulp nodig hebt met Vitek VTD-HOCR6E2812V stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Vitek

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd