Vitek VTC-IRE40 Handleiding

Vitek Niet gecategoriseerd VTC-IRE40

Lees hieronder de 📖 handleiding in het Nederlandse voor Vitek VTC-IRE40 (26 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/26
VITEK
VTC-IRE40/2810
Long Range IR Bullet Camera
• High Density 1/3” EX-VIEW CCD & Effio-E DSP
• 700TVL High Resolution
• Advanced IR Optimizer eliminates washout and dramatically
reduces over saturation of IR illuminated video without engaging
the Image Signal Processor chip
• 40 Infrared LEDs at 850nm enable viewing in total darkness up
to 150 feet
• 0.003 Lux (F1.2 @ 40IRE) / 0 Lux with IR LEDs On
• E-WDR by Adaptive Tone Reproduction
• 2.8-10mm Varifocal Auto Iris Lens with External Adjustments for
Focus and Zoom
• True Day/Night by ICR - Infrared Cut Removal
• 2DNR Noise Reduction
• Motion Detection, Privacy Masking & Highlight Masking
• Dual Glass Compartments to Eliminate Glare
• OSD (On Screen Display) menu and Camera ID
• Heavy Duty IP68 rated weather/vandal resistant aluminum
construction is 100% water and dust proof
• OSD (On Screen Display) and Secondary Video Output
• 24VAC/12VDC Dual Voltage
1
Table of contents
1. Safety Instructions and Notes…......................................................................................................
2. General Descriptions............................................................................ ...……………………………
3. Supplied Items...................................................................................... ...……………………………
4. . .Part names…………………………… … .................................................. ...…………………………
5. Installation Instructions...................................................................................... .……………………
6. Setup Menu ……………............................................................................ ..…………………………
7. Specifications ……………………………………………….................................................................
8. Dimensional Drawings …………………………………………….......................................................
2
3
4
4
5
7
20
21
2
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
This symbol is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature
accompanying the unit.
This symbol is intended to alert the user to the presence of
uninsulated "dangerous voltage" within the product's enclosure that
may be of sufficient magnitude to constitute a risk of electric shock.
Warning (NTSC version) -- This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation
of this equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the . interference at their own expense
Caution -- Any changes or modifications in construction of this device that are not approved by the party
responsible for compliance could void the user's authority to operate the equipment.
Notice -- this manual are processed to help comprehension and The images used in
may differ from the actual video of the camera.
1. Safety Instructions and Notes
• Please read these safety and operating instructions before placing the camera into operation.
• Keep the manual in a safe place for later reference.
• Pay attention to safety when laying the connection cable and observe that the cab tole is not subjected
heavy loads, kinks, damage or moisture.
• Never open the device boards or lensesto expose .
The warranty becomes void if repairs are undertaken by unauthorized persons.
• Only authorized service centers may perform maintenance or repairs.
• Use only a mild detergent to clean the housing.
• Keep the window surface clean of dirt or dust, which may reflect to the lens at night.infrared light in
• The camera should never be operated beyond the technical specifications. This can lead to destruction.
WARNING
Caution
To prevent electric shocks
and risk of fire hazards, do
NOT use other than specified
power source.

Product specificaties

Merk: Vitek
Categorie: Niet gecategoriseerd
Model: VTC-IRE40

Heb je hulp nodig?

Als je hulp nodig hebt met Vitek VTC-IRE40 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Vitek

Vitek

Vitek VT-EH4 Handleiding

8 Juli 2024
Vitek

Vitek VT-EH8 Handleiding

9 Juni 2024
Vitek

Vitek VT-EH16 Handleiding

9 Juni 2024
Vitek

Vitek VTD-AR2812/I Handleiding

9 Juni 2024
Vitek

Vitek VTD-A2812/V Handleiding

9 Juni 2024
Vitek

Vitek VTD-AR2812/V Handleiding

9 Juni 2024
Vitek

Vitek VTC-C770DN Handleiding

9 Juni 2024
Vitek

Vitek VTC-IRH70/650 Handleiding

9 Juni 2024
Vitek

Vitek VTC-BHOC6R2812 Handleiding

16 Juni 2023
Vitek

Vitek VT-H160 Handleiding

16 Juni 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Protector

Protector AS-5030.3 V2 Handleiding

21 December 2024
Sabrent

Sabrent AU-MMCW Handleiding

21 December 2024
Sabrent

Sabrent AU-2X35 Handleiding

21 December 2024
Sabrent

Sabrent CB-RS232 Handleiding

21 December 2024
Owon

Owon 500W Handleiding

21 December 2024
Owon

Owon 300W Handleiding

21 December 2024
Sabrent

Sabrent SB-RKTQ4-1TB Handleiding

21 December 2024
Sabrent

Sabrent SB-RKTQ-1TB Handleiding

21 December 2024
Sabrent

Sabrent SB-ROCKET-1TB Handleiding

21 December 2024
Sabrent

Sabrent SB-HTSS Handleiding

21 December 2024