Vitek VTC-C2NZ Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Vitek VTC-C2NZ (23 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/23
VITEK
VTC-C2NZ
ENVI 2.1MP Auto-
Focus-Zoom IR Network
Camera
• 1/2.9” Sony CMOS
• 2.1 MegaPixel
• Up to 30fps live view @ 1920x1080 (1080p)
• MegaPixel IR Corrected 3-9mm (VTC-C2NZ39) / 9-22mm
(VTC-C2NZ922) with Auto-Focus Motorized Optical Zoom
• H.264/MJPEG Dual Streaming
• 16:9 Video format
• On-board Intelligence (OBI Technology) delivers Auto-
Focus-Zoom by tracking motion, then optically zooming in
to that area of the frame
• Onvif Compliance
• Integrated Cooling Fan
• SD memory card slot for Local recording
• Mechanical IR Cut Filter (True Day/Night)
• Motion Activated Pointing Zoom, Defog, BLC/HLC, Motion
Deblur, Pixel Defect Compensation, Mirror, Flip, Pixel
Defect Compensation
• 12VDC/24VAC & PoE (Power over Ethernet) Operation
Specifications & installation procedure subject to
change without notice. Visit www.vitekcctv.com for
the most current information available.
Safety Precaution
01
NETWORK AF-ZOOM CAMERA
CAUTION: TO REDUCE THE RISK OF ELECTICAL
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
To prevent electrical shock and risk of fire hazards, do not expose this unit
to rain or moisture and only use specified power source.
Warning :
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
their own expense.
Caution :
Any changes or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user's authority
to operate the equipment.
Main power quality should be that of a typical commercial environment. If the user
of the model requires continued operation during power interruptions, it is
recommended that the device be powered from an uninterruptible power supply
(UPS).
The symbol is intended to alert the user to the presence of important
operating and maintenance(servicing) instructions in the literature
accompanying the unit.
The symbol is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electrical shock.
Safety Precaution
02
NETWORK AF ZOOM CAMERA
NOTICE
The image used in this instruction manual are processed to help comprehension
and may differ from actual video of the camera.
Avoid installing in areas where shock or vibration may occur.
Pay attention to safety when running the connection cables and make sure that the
cables are not subject to heavy loads, kinks, moisture or damage.
Never open the device (no user serviceable parts inside).
The warranty becomes void if repairs are undertaken by unauthorized persons.
Maintenance and repair have to be carried out only by authorized service centers.
Use only a mild detergent to clean the housing.
The camera should never be operated beyond the technical specifications.
This can lead to damaging the device and void the warranty.
The camera should never be operated in water.


Product specificaties

Merk: Vitek
Categorie: Niet gecategoriseerd
Model: VTC-C2NZ

Heb je hulp nodig?

Als je hulp nodig hebt met Vitek VTC-C2NZ stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Vitek

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Festo

Festo VPPI Handleiding

21 November 2024
Festo

Festo SFAB Handleiding

21 November 2024
Festo

Festo SFAH Handleiding

21 November 2024
Festo

Festo DRRD-12 Handleiding

21 November 2024
Festo

Festo SDE3 Handleiding

21 November 2024
Festo

Festo SFTE Handleiding

21 November 2024
Festo

Festo CRVZS-5 Handleiding

21 November 2024