Vitek VTC-C2B-HS Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Vitek VTC-C2B-HS (24 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24
FEATURES:
1/2.9” Sony CMOS
2.1 MegaPixel With full 1080p/720p HD-SDI
Output (SMPTE 292M)
Smart Motion Zoom tracks motion, then
intelligently zooms into that area of the frame
Mechanical IR Cut Filter (True Day/Night)
Small scale design to fit in 5” dome enclosures
such as the Pelco DF5 Housing
Fully programmable advanced WDR
Sensitivity of 0.0005 Lux
Advanced OSD Functions: Defog, BLC/HLC,
Motion Deblur, Pixel Defect Compensation,
Mirror, Flip
100% Pure Digital Transmission of video data
Up to 700HD Transmission Range (Depending
on cable characteristics and integrity)
12VDC / 24VAC Dual Voltage Operation
VTC-C2B-HS
2.1MP HD-SDI Smart
WDR Camera
VITEK
Safety Precaution
02
FULL-HD MEGA-PIXEL CAMERA
CAUTION: TO REDUCE THE RISK OF ELECTIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
To prevent electric shocks and risk of fire hazards, do NOT use other than
specific power source.
Warning :
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
Caution :
Any changes or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user's authority
to operate the equipment.
Mains power quality should be that of a typical commercial environment. If the user
of the model requires continued operation during power mains interruptions, it is
recommended that the model be powered from an uninterruptible power supply
(UPS) or a battery.
The symbol is intended to alert the user to the presence of important
operating and maintenance(servicing) instructions in the literature
accompanying the unit.
The symbol is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
FULL-HD MEGA-PIXEL CAMERA
Safety Precaution
NOTICE
The image used in this instruction manual are processed to help comprehension
and may differ from actual video of the camera.
Avoid installing in areas where shock or vibration may occur.
Pay attention to safety when running the connection cable and observe that the cable
is not subjected to heavy loads, kinks or damage and no moisture can get in.
Never open the device.
The warranty becomes void if repairs are undertaken by unauthorized persons.
Maintenance and repair have to be carried out only by authorized service centers.
Use only a mild detergent to clean the housing.
The camera should never be operated beyond the technical specifications.
This can lead to damaging the camera and voiding the warranty.
The camera should never be operated in water.
03


Product specificaties

Merk: Vitek
Categorie: Niet gecategoriseerd
Model: VTC-C2B-HS

Heb je hulp nodig?

Als je hulp nodig hebt met Vitek VTC-C2B-HS stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Vitek

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd