Vitek VT-PIRC2H Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Vitek VT-PIRC2H (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
VITEK
1/3” Sony High Density CCD (960H) with 700 TV Lines
Minimum Illumination of 0.2 Lux / 0.1 Lux
Pinhole 3.7mm / F2.0 Lens Included
NC/N/NO Alarm Output
Working 100’ Motion Detection Using 58 Beams Within 3
layers (35’ x 35’ Coverage Area)
VT-PIRC2/H
Color PIR Cameras
2
PIR BOARD LAYOUT
1. LED: When an intrusion is detected, the LED will activate.
2. JP1: Pulse count setting.
1-2 short: Relay will activate when an intrusion is detected once. (For stable
environments or high risk operating environments)
2-3 short: Relay will activate when an intrusion is detected twice within 15 seconds.
(For harsh environments)
3. JP2: Relay output select.
Short: For outer control used in area where DC12V is requested (Limited at 200mA).
Normal: N.C. = DC12V out
Activate: N.O. = DC12V out
Open: Normal relay connector (1.5A at DC24V/1.5A at AC120V/1A at AC240V)
Normal: C & N.C. short / C & N.O. open.
Activate: C & N.C. open / C & N.O. short.
Caution! Risk of electric shock. Set-up and operation should be performed by
Authorized Service Person only.
4. VR1: Sensitivity adjustment.
Turn clockwise for high sensitivity, turn counter-clockwise for low.
5. VR2: Relay activation time adjustment (range about 2 ~ 30 seconds).
Turn clockwise for short time, turn counter-clockwise for long.
6. NC/C/NO Wiring:
YELLOWC: BLACK WHITE NO: NC:
CN1 Connector:
1. DC 12V IN
2. GND
3. AUDIO OUT (option)
4. GND
5. VIDEO OUT
6. RELAY C. (common)
7. RELAY N.O. (normal open)
8. RELAY N.C. (normal close)
CN2 Connector:
1. AUDIO IN (Not Available In US)
2. VIDEO IN (from CCD MODULE)
3. GND
4. DC 12V/120mA OUT (for CCD MODULE)
3
Image Device
Effective Pixels
Resolution
Minimum Illumination
S/N Ratio
Electronic Shutter
AGC
Sync. Mode
Scanning System
Gamma Correction
Sync. Frequency
Video Output
Power Source
Power Consumption
Operation Temp.
Standard Lens
Dimensions
1/3” Sony High Density CCD (960H)
1020 x 508
700 TV Lines
0.1 Lux
More Than 48dB
1/60 to 1/100,000 sec.
>18Db
Internal Sync.
2:1 Interlace
0.45
15.734KHz (H) / 60Hz (V)
Composite: 1.0 Vp-p / 75 Ohm
12VDC
100mA
-10° ~ 60°C (14° ~ 140°F) Less Than 80% RH
3.7mm/F2.0
2.75” x 4.72” x 1.69” (70mm x 120mm x 43mm)
SPECIFICATIONS VT-PIRC2/H
Use a professional CCTV monitor only to achieve best resolution and performance.
Camera may also be connected to other devices such as a DVR .
Use copper braid RG59U coax for best video performance. Video may also be transmitted via
CAT5E cable with the use of video baluns .
12VDC Regulated power adapter 12V must be used otherwise the device will be damaged
and un-repairable.
Application Note:


Product specificaties

Merk: Vitek
Categorie: Niet gecategoriseerd
Model: VT-PIRC2H

Heb je hulp nodig?

Als je hulp nodig hebt met Vitek VT-PIRC2H stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Vitek

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Festo

Festo VPPI Handleiding

21 November 2024
Festo

Festo SFAB Handleiding

21 November 2024
Festo

Festo SFAH Handleiding

21 November 2024
Festo

Festo DRRD-12 Handleiding

21 November 2024
Festo

Festo SDE3 Handleiding

21 November 2024
Festo

Festo SFTE Handleiding

21 November 2024
Festo

Festo CRVZS-5 Handleiding

21 November 2024