Viking RD24CSTSS Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Viking RD24CSTSS (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
Installation Guide
Countertop Side Trim
Countertop Rear Trim
2
Installation (Side Trim)
1. Remove the outside grates and grate supports
next to the counter.
2. Locate and remove the screws holding the grate
support side trim in place. Keep the screws for
reuse.
3. Lift the grate support side trim out. It will not be
reinstalled.
4. Locate and remove the screws holding the heat
shield in place. Keep the screws for reuse.
5. Lift the heat shield out and set aside for reuse.
6. Place the countertop side trim into place. Align
with the countertop and the landing ledge.
Replace and secure with the original screws.
7. Replace the heat shield and align the slotted
screw holes with the screw holes in the side trim.
Replace and secure with the original screws.
8. This countertop side trim was designed to
accommodate most installations. If the trim needs
to be shorter, cut at the rear to fi t.
For Models:
R24CSTSS - 24” D. VGIC Open Burner Ranges
C A U T I O N
The heat shield must be replaced only if it
is part of the original product.
Grate support side trim
(standard with product)
Heat shield
(not on all products)
Countertop side trim
(optional accessory)
Heat shield
(not on all products)
3
Installation (Side Trim)
Place the countertop side trim template against the side of the range or rangetop. The fl ange of the template should
be wrapped around the back of the unit. The top of the template should be even with the top edge of the outer trim.
Mark the holes and remove template. Using a 9/64” drill bit, drill the three designated holes into the side of the range or
rangetop. Place the countertop side trim into place and secure with the provided screws.
For Models:
P24CSTSS - 24” D. 5 Series VGCC/VGSC/VDSC/VESC/VISC Ranges and VGRT Rangetops
24” D. RDSCG/RDSCD/RDSCE D3 Ranges
RD24CSTSS - 24” D. 3 Series RVGR/RVDR/RVER Ranges


Product specificaties

Merk: Viking
Categorie: Niet gecategoriseerd
Model: RD24CSTSS

Heb je hulp nodig?

Als je hulp nodig hebt met Viking RD24CSTSS stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Viking

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd