Viking MB 410 Handleiding


Lees hieronder de šŸ“– handleiding in het Nederlandse voor Viking MB 410 (8 pagina's) in de categorie Grasmaaier. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
15.01
Technical Information
With its new MB 410 and MB 415 petrol lawnmo-
wers, VIKING has expanded its product line with two
new models, while simultaneously laying the foun-
dation for a new generation of lawnmowers.
The new, compact, and easy-to-service Eā€¢Line
models round off the lower end of our product
range.
The lightweight, monocoque plastic housing made
of high quality polymer is torque resistant and,
thanks to its smooth surface, easy to clean.
The MB 410 and MB 415 models are equipped with
a high performance four-stroke combustion engine
with primer carburettor and fixed throttle setting.
As with an electric lawnmower, the engine speed
remains constant during operation.
The engine is stopped via the motorstop lever.
Model MB 415 is also equipped with a heavy duty,
maintenance free single-speed gearbox for conve-
nient operation.
The New MB 410, MB 415 Lawnmowers
Technical Information 15.01 - Page 2 -
Overview:
1. General information
2. Appliance overview
3. Cutting height adjustment
4. Engine oil and fuel
5. Maintenance
6. Troubleshooting
7. Technical specifications
8. Repair times
9. Spare parts list
1. General information
Always read the instruction manual before operating
for the first time. National legislation and the safety
instructions in the instruction manual must be
observed for repairs or maintenance, particularly
when operating the appliance for the first time
(test run).
To avoid serious injury, the engine must always be
switched off when performing maintenance work on
the lawnmower.
Before carrying out maintenance work, the ignition
lead must always be disconnected and fastened
away from the spark plug in order to prevent the
engine from being started inadvertently.
IMPORTANT
1 Upper control arm
2 Motorstop lever
3 Starter cable
4 Upper part of catcher
bag
5 Lower part of catcher
bag
6 Lower parts of control
arm
7 Wheels
8 Housing
9 Cutting height
adjustment, front axle
10 Cutting height
adjustment, rear axle
11 Engine
12 Ejection flap
13 Cable clip
14 Rotary handle
15 Cable guide
16 Level indicator
17 Drive lever
2. Appliance overview
17
16
14
13
12
A
11
9
1
2
3
4
5
6
7
8
15
A
10
Technical Information 15.01 - Page 3 -
3. Cutting height adjustment
The new MB 410 and MB 415 lawnmowers feature
separate cutting height adjustment for the front and
rear axles.
The adjustment lever for front axle height adjust-
ment is located next to the left front wheel.
The adjustment lever for rear axle height adjustment
is located next to the left rear wheel.
4. Engine oil and fuel
Top up engine oil before initial start (oil dipstick).
Please consult the engine instruction manual for the
grade of engine oil to be used and the filling
quantity.
Note:
VIKING HD 15W-40 and VIKING SAE 30 are two
high quality motor oils specially formulated for use
in small four-stroke engines.
Checking engine oil
Check engine oil level at regular intervals.The oil
level must be within the marked field on the dipstick.
Screw the dipstick in fully to measure the level.
Fuel
Recommendation: Fresh good quality fuel, normal
unleaded petrol.
There are 7 cutting height adjustment settings
ranging from 25 to 70 mm.
Cutting levels 2 to 6 are standard.
Level 1 = lowest cutting height
Level 7 = highest cutting height
The engine must be switched off before adjusting
the cutting height.
Height adjustment:
First, push adjustment lever in direction of the wheel
and then allow to engage in the desired position
(= cutting height).
The cutting height indicators are located immediate-
ly next to the adjustment levers, on the housing or
on the catcher bag.
The cutting height settings on the front and rear
axles should be identical. Different cutting heights
result in a reduced collecting performance.


Product specificaties

Merk: Viking
Categorie: Grasmaaier
Model: MB 410

Heb je hulp nodig?

Als je hulp nodig hebt met Viking MB 410 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Grasmaaier Viking

Handleiding Grasmaaier

Nieuwste handleidingen voor Grasmaaier

Anova

Anova CC146T Handleiding

20 December 2024
Anova

Anova E60BC Handleiding

20 December 2024
Anova

Anova CC151T Handleiding

20 December 2024
Gude

Gude 320/20-4 Handleiding

19 December 2024
Zipper

Zipper ZI-MOS4T Handleiding

19 December 2024
Ozito

Ozito CPM-300C Handleiding

10 December 2024
Powerblade

Powerblade 350CX Handleiding

10 December 2024
Powerblade

Powerblade V475 Handleiding

10 December 2024
Stihl

Stihl RM 253 Handleiding

8 December 2024
Baumr-AG

Baumr-AG 790SXe Handleiding

7 December 2024