Viking BLK-4 Handleiding

Viking Effect machine BLK-4

Lees hieronder de 📖 handleiding in het Nederlandse voor Viking BLK-4 (8 pagina's) in de categorie Effect machine. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

PRODUCT MANUAL

Designed, Manufactured and Supported in the USA

C O M M U N I C AT I O N & S E C U R I T Y S O L U T I O N S

Provide LED Strobe / Beacon

Visual Indication of Line Status

Features

The BLK-4 provides high visibility indication of analog line

status through a high powered 360º LED strobe and/or

beacon visual indicator. The is the ideal solutionBLK-4

for the hearing impaired and can be used equally well in

loud warehouses or factories, where ringing phones can

not be heard. Alternatively, the can be used to addBLK-4

emergency notification to pre-existing emergency phones

by turning on the strobe light when the emergency phone

is in use.

The included control module has a disable input which is

ideal for two-button emergency phones, such as Viking’s

E-1600-20A, allowing “Info” button calls to be placed with-

out activating the relay (turning on the emergency strobe

light, camera, etc.) Four DIP switches are provided for

turning ring detection on or off, off-hook/loop detection on

or off, 12VDC or dry relay contact output and for selecting

a ring cadence mode which allows the relay to follow ring-

ing or to remain activated during the off time of standard

ring cadence. The control module can be installed on any

standard telephone line or analog PABX/KSU station. The

strobe can be interfaced to flash on ringing, off-hook or a

combination of ringing and off-hook (line in-use).

The BLK-4 is designed for indoor applications. The BLK-

4-EWP is equipped with Enhanced Weather Protection

(EWP) for outdoor installations where the unit is exposed

to precipitation or condensation. For more information,

see .DOD# 859

The kit includes: (1) control module, (1) SL-2/SL-2-EWP

blue LED strobe light, (1) 12V DC power adapter, (16) gel-

filled butt connectors and (1) single gang weatherproof

mounting box with gaskets and hardware.

• BLK-4-EWP’s control module and strobe light come

with Enhanced Weather Protection (EWP), EWP prod-

ucts are designed to meet IP66 Ingress Protection

Rating, see DOD# 859

• Durable polycarbonate lens

• High output long life LED technology

• Four programmable flash patterns:

- Single Flash - Double Flash

- Quad Flash - Flicker Flash

• 6 programmable beacon and strobe brightness set-

tings

• Immune to shock and vibration

• Flush mount or surface mount with weatherproof sin-

gle gang box (included)

• 3/4” knockouts for connecting conduit, etc.

• Strobe and control module may be installed separately

• Can be configured to signal: ringing, off-hook, a com-

bination of both ringing and off-hook (line in-use), or

triggered from a contact closure

• One set of (NO) normally open and (NC) normally

closed relay contacts provided

• Selectable ring cadence mode (strobe light will remain

flashing between rings)

• Switched 12V DC output (follows relay activation for

powering strobe lights, cameras, etc.)

• On/off switches for ring detection and off-hook/loop

detection

• Disable input, ideal for use with two-button emergency

phones like Viking’s ( ), will notE-1600-20A DOD# 215

activate strobe light on “Info” calls

• Ringing Phone or TTY indication for the hearing impaired

• Ringing phone indication in loud warehouses and factories

• Emergency illumination for emergency phones in elevators,

campuses, hallways, parking ramps, etc.

• Alarm indication for security systems or alarm panels with

phone dialers

Power: 120V AC to 12V DC adapter provided

Maximum Power Supply Run Length on CAT-5: 1 pair = 125 ft,

2 pair = 225 ft, 3 pair = 325 ft, 4 pair = 475 ft

Maximum SL-2 Wire Run Length on CAT-5: 3 wires = 100 ft, 6

wires = 300 ft

Strobe Dimensions: 111mm diameter x 69mm (4.38" x 2.75")

Control Module Dimensions: 74mm x 53mm x 25mm (2.9" x 2.1"

x 1.0”)

Shipping Weight: 1.5 kg (3.3 lbs)

Operating Temperature: -26° to 54°C (-15° to 130° F)

Relay Contact Rating: .5A @ 125V AC/1A @ 30V DC

Minimum Loop Current: 15 mA

Minimum Ring Voltage: 25V RMS

Ringer Equivalence: 0.5 A REN

Disable/Info Switch Input: 50mA/80mW maximum

Strobe Flash Rate: 60 flashes per minute (default) see Strobe

Flash Patterns page 6

Maximum Strobe Light Output @ 15VDC: Clear lens: 323 lu-

mens, Amber lens: 242 lumens, Blue lens: 116 lumens, Red lens:

66 lumens

Humidity BLK-4- : 5% to 95% non-condensing

Humidity BLK-4-EWP- : up to 100% condensing

Mounting: Fasten to wall, post, etc. with complete surface mount-

ing hardware included

Connections: Color coded wires with gel-filled butt connectors

BLK-4/EWP

Line Status LED Strobe/

Beacon Light Kit

September 29, 2014

Applications

Specifications

VIKING

* Gel-Filled Butt

Connectors (included)

Note: Polarity Sensitive!

(-) Black with

Red stripe

120V AC

(+) Red with

Black stripe

Black w/Red stripe

Red with Black stripe

Red

Black

green

Orange

Purple

Yellow

White

Blue

Gray

Brown

Green w/ Yellow Stripe

Red w/ Yellow Stripe

Normally Closed

Common

Normally Open

4.60

2.50

2.84

1.50

0.6

1.05

2.0

2.75

4.4

4.0

12V DC

adapter

(included)

Control Module

12VDC Output

(Strobe Light Power)

Auxiliary

Relay

Contacts

Switched 12VDC Output

(to green SL-2 control lead)

Trigger Input

Disable/Info Switch Input

To Terminal Device/Phone

To C.O. Line or Analog

PABX/KSU Station

12VDC Input

Internal View of the

Weatherproof Single

Gang Box (included)

Side View of the

Strobe Light (included)

Back View of the

Weatherproof Single Gang

Box (included)

Negative

Positive

* Note: The gel-filled (water tight)

butt connectors are designed for

insulation displacement. Do not strip

wires prior to terminating.

Wiring

IMPORTANT: Electronic devices are susceptible to lightning and power

station electrical surges from both the AC outlet and the telephone line.

It is recommended that a surge protector be installed to protect against

such surges.

Installation

* Gel-Filled Butt

Connectors (included)

*** SL-2/SL-2-EWP

Blue Strobe Light

Foam

Gasket

Strobe

Mounting Ring

1/2" Close Nipple

Faceplate

Foam

Gasket

(2) 10-32 x 3/8" self

tapping screws

(2) 6-32 x 3/4"

screws

** Nipple

1/2" x close

(2) Knockout

Plugs

Control

Module

(2) 7/8" Nylon

spacers

Red

Green Green

Black Black

Red

Internal View of the

Weatherproof Single

Gang Box (included)

A. Installing the Strobe Light Using the Included Weatherproof Box

* Note: The gel-filled (water tight) butt connectors are designed for insulation displacement. Do not strip wires

prior to terminating.

** Important: First fully tighten the nipple into the faceplate. Next add the (2) nylon spacers, then fasten the strobe

mounting ring.

*** Note: For outdoor applications, orient the blue strobe light with the screws at the top and bottom. Use a bead

of silicone to fill any gaps or spaces to prevent water from entering the strobe light.

The BLK-4 Strobe Light Kit may be

mounted without using the included

weatherproof box. To mount the

strobe light from the front, use the

diagram shown to the right.

RED

GREEN

BLAC

SL-2/SL-2-EWP

Strobe Light

(included)

To BLK-4

Control

Module

(included)

2.75”

(2) #8-32 x 2 1/2 Phillips

Head Self Tapping Screws (included)

Wall, post, etc.

C. Rear Mounting Without Weatherproof Box

To mount the strobe light from the rear,

use the diagram shown to the right.

B. Front Mounting Without Weatherproof Box

(2) #10-32 x 5/8

Phillips Head Self

Tapping Screws

(included)

SL-2/SL-2-EWP

Strobe Light

(included)

To BLK-4 Control

Module (included)

RED

GREEN

BLACK

Product specificaties

Merk:	Viking
Categorie:	Effect machine
Model:	BLK-4
Kleur van het product:	Blauw
Gewicht:	1500 g
Breedte:	74 mm
Diepte:	53 mm
Hoogte:	25 mm
Aantal lampen:	1 lampen
Soort lamp:	LED
Stroombron:	AC
Ingangsspanning:	12 V
Kleur licht:	Blauw
Baldiameter:	111 "
Flitslichtsnelheidsbereik (flitsen per seconde):	1 - 60