Vigitron Vi3305 Handleiding

Vigitron Netwerkkaart/adapter Vi3305

Lees hieronder de 📖 handleiding in het Nederlandse voor Vigitron Vi3305 (2 pagina's) in de categorie Netwerkkaart/adapter. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/2
Application Drawings
Vi3305 5-Port L2 Extended UTP PoE Switch Installation Manual
DO NOT OPEN
RISK OF ELECTRIC SHOCK
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DO NOT REMOVE COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
IP Camera-end Installation
The Smart Choice for Transmission Solutions www.vigitron.com
Vigitron’s MaxiiNet™ Vi3305 fixed managed five port extended UTP PoE
switch brings new performance standards to the growing need for high
speed transmission of high speed Ethernet. It eliminates the need for local
power for the cameras connected to its 4 ports at extended distances. The
Vi3305 provides a 10/100Base-T and an SFP socket for fiber optic uplink.
The Vi3305 is powered locally by the Vi1120 to provide 802.3at to each port,
providing up to 37W (more than 802.3at) to each port or up to 74W for two
combined ports compensating for surge conditions and requirements for
high powered PoE PTZ domes.The Vi3305 can operate over UTP at
extended distances up to 3,000 feet (909m) when combined with the
Vi2301A or Vi2300A.
With an operating temperature range of -30°C to 75°C, the Vi3305 is the
perfect solution for data and power transmission for warehouses, parking
lots, campuses, casinos, and many more. The Vi3305 is MegaPixel Certified
(MPC™), type tested to network packet performance standards, and major
manufacturer compatibility tested to assure you error free, quality opera-
tions. Fixed managed L2 functions include IEEE 802.1, p Qos, support of 2k
MAC addressing, learning, aging, and a non-blocking switch fabric.
Installation cost savings, proven performance, and major camera manufac-
turer compatibility all go into making Vigitron’s MaxiiNet™ Vi3305 an ideal
solution for standard distance data and power transmission.
Important Safety Warning
Ethernet Switch/NVR-end Installation
- Read and keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Install in accordance with the manufacturer’s instructions.
- This installation should be made by a qualified service person and should conform to all local
codes.
- DO NOT bundle UTP or Coax signals in the same conduit as high-voltage wiring.
- To reduce the risk of fire or electrical shock, do not expose these products to rain, moisture,
dripping or splashing.
- No objects filled with liquids, such as vases, shall be placed on Vigitron equipment.
- DO NOT install the unit in a place where the operating ambient temperature exceeds 75°C or
is below - 40°C.
- Make sure that the external power supply output voltage is in the recommended range.
- Do not install near any heat sources such as radiators, heat registers, stoves or other
apparatus (including DVRs) that produce heat.
- Protect the power cord from being walked on or pinched particularly at power source,
convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as when a power supply cord or plug is damaged, liquid
has been spilled, objects have fallen inside the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or has been dropped.
- The main plug is used as the disconnect device and shall remain readily operable.
WARNING! - To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture. This apparatus shall not be exposed to
dripping or splashing and no objects filled with liquids, such as vases shall
be placed on the apparatus.
WARNING! - This apparatus is a Class I product. This product must
be connected to a mains socket outlet thru an AC to DC Power supply.
WARNING! - The mains plug is used as the disconnect device and
shall remain readily operable.
PoE Switches
MaxiiNet™
Uplink Connections:
There are 2 ways to connect the Vi3305 Uplink to another network switch or
NVR, either fiber optics or Standard UTP Ethernet. Only one of these ports
can be active at the time.
a) Standard Ethernet RJ45 connector
- Connect the Uplink RJ45 connector of the Vi3305 to a standard Cat5/6
cable of maximum 328 feet (100m). Connect the other end of the cable to
the Ethernet port of the other network switch.
b) Fiber optics
-If you want to use fiber optics first you need to insert a suitable SFP that
matches your fiber optic cable into the Uplink SFP socket of the Vi3305.
Then connect the fiber optics cable to the SFP. Connect the other end of
SFP to the optical connector of the other network switch.
Power Supply:
-Connect a power supply to the power input of Vi3305. If there is no need
for providing PoE on 4 ports a 12VDC power supply such as Vi0012 will be
sufficient. If PoE is required at the ports you need to select a 48-57VDC
power supply such as Vi1120 that can provide maximum PoE capacity on
all 4 ports.
Extended Ethernet Ports:
- Connect a standard Cat5, or better, UTP cable of maximum 3,000 feet
(914m) to one of the Ethernet ports. The ports will automatically configure
as 10 or 100BaseT depending on the distance.
- Use an Ethernet and PoE “Extender” such as Vi2301A or Vi2300A at the
camera side.
- Connect one end of the long Coax cable to the BNC connector of Extended
port of “Extender”.
Connecting 4 remote cameras using Coax and Fiber Optics
Network Switch
Vi3305
Power
Supply
Data
Up to 80Km
Powering 4 remote cameras over Coax using PoE
Fiber Optic
Cat 5/6
Network Switch
Vi3305
Power
Supply
Coax
IP Cameras
328 ft. (100m) Vi2301A
Vi2300A
Up to four cameras, including high powered PTZ domes can be remotely powered without the
need for local power supplies.
The Fiber optics uplink port can be used to connect 4 cameras up to 80Km.
Data + PoE
328 ft. (100m)
Data + PoE
3,000 ft. (914m)
Data + PoE
3,000 ft. (914m)
Data + PoE
3,000 ft. (914m)
Data + PoE
3,000 ft. (914m)
Data + PoE
328 ft. (100m)
Vi2301A Data + PoE
328 ft. (100m)
Vi2301A Data + PoE
328 ft. (100m)
IP Cameras
Vi2301A
Vi2300A
Data + PoE
328 ft. (100m)
Data + PoE
3,000 ft. (914m)
Data + PoE
3,000 ft. (914m)
Data + PoE
3,000 ft. (914m)
Data + PoE
3,000 ft. (914m)
Data + PoE
328 ft. (100m)
Vi2301A Data + PoE
328 ft. (100m)
Vi2301A Data + PoE
328 ft. (100m)
Limited Lifetime Warranty
Vigitron, Inc. warrants that all Vigitron products (“Product”), if used in accordance
with these instructions, will be free of defects in material and workmanship for
lifetime defined as the duration period of time until product end of life is announce-
ment. After which Vigitron will continue to provide warranty services for a period of 3
years. Period covering valid warranty will be determined by proof of purchase in the
form of an invoice from an authorized Vigitron dealer.
Warranty will only be provided for as long as the original end user purchaser owns
the product. Warranty is not transferrable. At Vigitron's option, defective product will
be repaired, replaced or substituted with a product of equal value. This warranty
does not apply if, in the judgment of Vigitron, Inc., the Product fails due to damage
from shipment, handling, storage, accident, abuse or misuse, or if it has been used
or maintained not conforming to Product manual instructions, has been modified, or
serial number removed or defaced. Repair by anyone other than Vigitron, Inc. or an
approved agent will void this warranty. Vigitron, Inc. shall not under any circumstanc-
es be liable to any person for any incidental, indirect or consequential damages,
including damages resulting from use or malfunction of the product, loss of profits or
revenues or costs of replacement goods. The maximum liability of Vigitron, Inc.
under this warranty is limited to the original purchase price of the Product only.
Prior to returning any defective Product, the end customer or the reseller from whom
the end customer originally purchased the Product must obtain a Return Materials
Authorization (RMA) number from Vigitron, Inc. All defective Products should be
returned to Vigitron, Inc. with shipping charges prepaid. No collect shipments will be
accepted.
Technical Specifications*
Drawings
Status LEDs
© Copyright 2022 Vigitron, Inc.
TEL (+1) 858 - 484 - 5209 • FAX (+1) 858 - 484 - 1205
7810 Trade Street, Suite 100, San Diego, CA 92121, USA • support@vigitron.com • www.vigitron.com
Vi3305_UM
LED Name Color Status Function
OFF Power is OFF
ON Power is ON
OFF No Traffic
FLASHING Traffic
GREEN ON Connection is OK, 10BaseT Mode
ORANGE ON Connection is OK, 100BaseT Mode
OFF No connection
FLASHING Connection is OK with Traffic
Link/Act
(Standard Side)
Power GREEN
Traffic
(Extended Side) YELLOW
10/100 BaseT
(Extended Side)
Ordering Information
YELLOW
Electrical
Ethernet Interface Standard 10/100BaseT
UTP 100 Ohm +/- 20%, up to 328 ft. (100m)
Power Source External Power Supply: 57VDC @ up to 120W
Status LEDs Power: Power On
Ethernet: Traffic, Link
PoE: PoE present
Extended Uplink: 10/100 Link, Traffic
Connectors Fiber: MSA compliant SFP socket
Ethernet Interface: 1 x RJ45
Ethernet Extended Interface: 4 X RJ45
Power: Circular power connector
RFC 2544 TCP/IP Packet Transmission
768 UDP, 2068 HTTP, 793 TCP
791 IP, 1783 TFTP, 894 IP over Ethernet
PoE Compatibility IEEE 802.3af, IEEE 802.3at,74W High power PoE
Data Interfaces & RFC 768 UDP, RFC 2068 HTTP
Compliances RFC 793 TCP, RFC 791 IP
RFC 1783 TFTP, RFC 894 IP over Ethernet
RFC 2544 TCP/IP Packet Transmission
IEEE802.3af, 8IEEE02.3at
IEEE Compliances 802.3ab, 802.3z, 802.3af, 802.3at, 802.1p,
802.1Q, 802.1D, 802.1s, 802.3u, 802.3x,
802.3w
Service IPv4 Type of Service (TOS) & Differentiated Services (Diff-Serv)
Compliance IPv6 Traffic Class
Regulatory
Safety CE
Environmental RoHS, WEEE
Environmental
Humidity 0 to 95%, non-condensing
Temperature Operating: -30°C to +75°C
Storage: -40°C to +85°C
Mechanical
Dimensions 1.2x3.75x5.1 in., 3.0x9.5x13 cm (HxWxL)
Weight 0.76 lb (344 g)
Housing Aluminum
Optional Accessories
Vi1120: 57VDC, 120W Power Supply
Vi0017: 48VDC, 40W Power Supply
Vi0012: 12VDC, 12W Power Supply (for non-PoE Applications)
Vi0015: Combiner Cable for 74W PoE Operation
*Specifications subject to change without notice.
- Connect the IP camera’s RJ45 connector to the 10/100BaseT Ethernet
port of “Extender” using a standard Cat5/6 patch cable of maximum
328 feet (100 m) in length.
- If you want to use local power connect an external 12VDC power supply
such as Vi0012 to the power connector of the “Extender”. An optional
power adapter connector is provided to simplify connection. If no local
power supply is present the “Extender” will use POE.
After the whole link from the Vi3305, “Extender” and the IP camera is
complete, the link LED on the 10/100 connector should be “ON” to indicate
proper connection between the camera and “Extender”.
IP Camera-end Installation (continued)
3.75"
9.53cm
1.2"
3.0cm
Power
Front View
Vi3305 MaxiiNet 5-Port Extended UTP PoE Switch
12 3 4
Port
Link/Act
PoE
Rear View
Power
Vi3305 MaxiiNet 5-Port Extended UTP PoE Switch
1234
Port
Link/Act
PoE
10/100
10/100
Ordering Information
Vi3305
4-Port PoE Layer 2 Network Switch
Part No. Description
Vi2300A
1-Port Mini UTP Ethernet Extender
Vi2301A
1-Port UTP Ethernet Extender
Vi2304A
4-Port UTP Ethernet Extender
Vi2308A
8-Port UTP Ethernet Extender
Vi2316A
16-Port UTP Ethernet Extender
Vi00016
Combiner Cable for 74W PoE
Vi1120
120W 57V Power Supply
Vi0017
40W 48V DC Power Supply
Vi0012
12W, 12VDC Power Supply for non-PoE Applications
Related Products
Part No. Description
12/52-57VDC
Uplink
PoE Input Link/Activity
SFP

Product specificaties

Merk: Vigitron
Categorie: Netwerkkaart/adapter
Model: Vi3305

Heb je hulp nodig?

Als je hulp nodig hebt met Vigitron Vi3305 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Netwerkkaart/adapter Vigitron

Vigitron

Vigitron Vi00024 Handleiding

9 December 2024
Vigitron

Vigitron Vi3305 Handleiding

9 December 2024

Handleiding Netwerkkaart/adapter

Nieuwste handleidingen voor Netwerkkaart/adapter

Vivolink

Vivolink VLHUB221 Handleiding

11 December 2024
ZyXEL

ZyXEL NWA210BE Handleiding

11 December 2024
ZyXEL

ZyXEL NWA110BE Handleiding

11 December 2024
Panamax

Panamax MOD-UTP5E Handleiding

10 December 2024
TP Link

TP Link FC1420 Handleiding

10 December 2024
AViPAS

AViPAS AV-POE4 Handleiding

10 December 2024
Kathrein

Kathrein EXI 02 LAN Handleiding

5 December 2024
Sonnet

Sonnet Solo10G SFP+ Handleiding

4 December 2024
Hama

Hama 53313 Handleiding

3 December 2024
Digitus

Digitus DN-95122 Handleiding

1 December 2024