Victrola Roadie VAS-40B Handleiding

Victrola Speaker Roadie VAS-40B

Lees hieronder de 📖 handleiding in het Nederlandse voor Victrola Roadie VAS-40B (8 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
PLEASE READ THIS INSTRUCTION MANUAL CAREFULLY
BEFORE USE AND KEEP IT FOR FUTURE REFERENCE.
R O A D I E
T H E
MODEL: VAS- 40B
INSTRUCTION MANUAL
1
CARE AND MAINTENANCE
1. Do not subject the unit to excessive force, shock, dust or extreme temperature.
2. Do not tamper with the internal components of the unit.
3. Clean with a dry cloth. Solvent or detergent should never be used.
4. Avoid leaving unit in direct sunlight or in hot, humid or dusty places.
5. Keep unit away from heating appliances and sources of electrical noise such as fluorescent
lamps or motors.
CLEANING THE UNIT
To prevent fire or shock hazard, disconnect unit from the AC power source
when cleaning.
The finish on the unit may be cleaned with a dust cloth and cared for as other
furniture. Use caution when cleaning and wiping the plastic parts.
If the cabinet becomes dusty, wipe it with a soft dry dust cloth. Do not use any wax
or polish sprays on the cabinet.
If the front panel becomes dirty or smudged with fingerprints, it may be cleaned
with a soft cloth slightly dampened with a mild soap and water solution. Never use
abrasive cloths or polishes, as these will damage the finish of the unit.
CAUTION: Never allow any water or other liquids to get inside the unit while cleaning.
CONTROL PANEL
1. Power Toggle Switch ON/OFF
2. Volume Knob & Next Function
3. Bass Knob & Play/Pause Function
4. Treble Knob & Previous Function
5. USB Input
6. 3.5mm AUX Input Jack
7. LED Indicator ( - Blue / – Red / - Blue & Red / - Flashing Blue & Red) BT Aux-In USB Low Battery
8. LED Charging Indicator ( – Red / Charging Charging Complete - Green)
9. DC Input for Adaptor (5V-1A)
-
-
-
-
1
2
3
4
5
6
78
9
2
BLUETOOTH OPERATION
1. Turn the power switch to ON position, device will power on in Bluetooth mode.
NOTE: This is the default mode when an AUX cable USB input is not in use. or
2. The speaker will now be in Bluetooth pairing mode. The Bluetooth LED will illuminate & flash blue.
3. Turn on the Bluetooth feature of your Bluetooth enable device. Locate “VICTROLA ROADIE”
on your device. NOTE: Lower volume on speaker to avoid sudden loud audio.
4. Select from the device list when it appears on your device screen. “VICTROLA ROADIE”
If required, enter pass code “0000” to pair (link) the speaker with your device.
5. After successfully pairing your device with the speaker, you will hear an audible pairing sound
indicating it is paired.
6. Adjust the Volume, Bass and Treble level by rotating the related knob on the speaker.
7. Press the Volume Knob / Next Function to play the next song in Bluetooth mode.
8. Press the Bass Knob / Play/Pause Function to pause or resume playback in Bluetooth mode.
9. Press the Treble Knob / Previous Function to play the previous song in Bluetooth mode.
NOTE:
1. Refer to manual of your cell phone or other Bluetooth enabled device for Bluetooth
operation, since it may vary in different models.
2. If your Bluetooth enabled device does not support A2DP, it will not play the music through the
speaker, even after it's paired (linked).
3. The speaker will reconnect with the previous connected phone when its power ON again.
4. If you want to connect the speaker to another cell phone after pairing successfully,
disconnect with your current device to set the speaker to pairing mode again.
USB OPERATION
Turn the power switch to ON position, then insert a USB flash drive (not included).
The speaker will automatically change to USB mode. (LED indicator will illuminate Red & Blue)
The operations of the knobs and functions are the same as Bluetooth mode.
NOTE:
The device supports up to 64GB flash drive (and part of 128GB flash drive, with mixed files).
Large, non-music files may affect the device performance when reading the USB flash drive.
Device does not support external device charging.
AUX-IN OPERATION
You can play other music sources (iPod, MP3 or other digital audio players) through the speaker by
connecting the AUX-IN JACK to your external player’s audio out jack or headphone jack.
1. Plug one end of an audio cable (not included) into the Aux-In JACK. Speaker will automatically
switch to AUX mode. LED indicator will illuminate RED.
2. Plug the other end of the cable to the headphone jack of your digital audio player.
3. Play the external device plugged into the Aux-In JACK.
4. Adjust both volume controls on the speaker and the external device to a desireable audio level.
5. Adjust the Volume, Bass and Treble level by rotating the related knob.
NOTE:
1. The and functions will not operate while the speaker is inPrevious / Next Play / Pause
Aux-In mode.
2. You may need to adjust both the volume controls of your external device and the speaker
to obtain the desired audio level.


Product specificaties

Merk: Victrola
Categorie: Speaker
Model: Roadie VAS-40B

Heb je hulp nodig?

Als je hulp nodig hebt met Victrola Roadie VAS-40B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Victrola

Handleiding Speaker

Nieuwste handleidingen voor Speaker