Vertex Standard VX-231 Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Vertex Standard VX-231 (3 pagina's) in de categorie Radio communicatie. Deze handleiding was nuttig voor 58 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/3
OperatiOn
Preliminary StePS
Installacharged batterypackontothetransceiver,asde-
scribedpreviously.
ScrewthesuppliedantennaontotheAntennajack.Never
attempt to operate this transceiver without an antenna con-
nected.
IfyouhaveaSpeaker/Microphone,werecommendthatitnot
beconnecteduntil you arefamiliar with thebasic operation
oftheVX-230.
OPeratiOn Quick Start
Turnthetoppanel’sVOL/PWRknob
clockwisetoturnontheradioon.
Turnthetoppanel’sCHselectorknob
to choose the desired operating chan-
nel.
RotatetheVOL/PWRknobtosetthe
volume level. If no signal is present,
pressandholdintheProgrammable
keyassignedto“SQL OFF”formore
thanonesecond;backgroundnoise
will now be heard, and you may use
thistosettheVOL/PWRknobforthe
desiredaudiolevel.
BefOre YOu Begin
Battery Pack inStallatiOn and remOval
To install the battery, hold the transceiver with your left hand,
soyourpalmisoverthespeakerandyour
thumbisonthetopofthebeltclip.Insert
thebatterypackintothebattery
compartmentonthebackofthe
radio while tilting the Belt
Clipoutward, thenpush
thebottomsideofthe
batterypackuntil
thebatterypack
lockswiththeBat-
teryPackLatch.
Toremovethebattery,turntheradiooffandremoveanyprotec-
tivecases.Slide the BatteryPackLatch onthebottom ofthe
radio, then slide the battery downward and out from the radio
whileholdingtheBeltClip.
Caution
Do not attempt to open any of the rechargeable Lithium-
Ion packs, as they could explode if accidentally short-
circuited.
lOw Battery indicatiOn
Asthebatterydischargesduringuse,thevoltagegraduallybecomes
lower.Whenthebatteryvoltagebecomestolow,substituteafreshly
charged battery and recharge the depleted pack.When the battery
voltageislow,theLEDindicatoronthetopoftheradiowillblink
red.Furthermore,ifyourDealersetsthe“LowBatteryAlert”feature
intothetransceiver,analertbeeperwillsoundwhenthebatteryvolt-
ageislow.
PressandholdintheProgrammable
keyassignedto“SQL OFF”formore
thanonesecond(orpressthekey
twice)toquietthe noiseandresume
normal(quiet)monitoring.
Totransmit,monitorthechannelandmakesureitisclear.
THIS IS AN FCC REQUIREMENT!
Totransmit,pressandholdinthePTT
switch.Speakintothemicrophone
area of the front panel grille (lower
right-hand corner) in a normal voice
level. To return to the Receive mode,
releasethePTTswitch.
Do not transmit the radio without
an antenna connected.
IfaSpeaker/Microphoneisavailable,removetheplasticcapand
its two mounting screws from the right side of the transceiver,
theninserttheplugfromtheSpeaker/MicrophoneintotheMIC/
SPjack;securetheplugusingthescrewssuppliedwiththe
Speaker/Microphone.Holdthespeakergrilleupnexttoyourear
whilereceiving.Totransmit,pressthePTTswitchontheSpeak-
er/Microphone,justasyouwouldonthemaintransceiver’sbody.
Note: Save the original plastic cap and its mounting
screws.Theyshouldbere-installedwhennotusingthe
Speaker/Microphone.
Microphone
Speaker
MIC/SP Jack
(ExternalMic/Earphone)
VOL/PWR Knob
CH (Channel) Selector
Side 1 Switch
Push To Talk
(PTT) Switch
Antenna
LED Indicator
Battery Pack Latch
Side 2 Switch
SafetY training infOrmatiOn
ThisRadiohasbeentestedandcomplieswiththeFederalCommu-
nications Commission (FCC) RF exposure limits for Occupational
Use/Controlledexposureenvironment.Inaddition,itcomplieswith
thefollowingStandardsandGuidelines:
FCC 96-326, Guidelines for Evaluating the Environmental Ef-
fectsofRadio-FrequencyRadiation.
FCCOETBulletin65Edition97-01(1997)SupplementC,Eval-
uatingCompliancewithFCCGuidelinesforHumanExposureto
RadioFrequencyElectromagneticFields.
ANSI/IEEEC95.1-1992, IEEEStandardfor SafetyLevelswith
Respectto Human ExposuretoRadio FrequencyElectromag-
neticFields,3kHzto300GHz.
ANSI/IEEE C95.3-1992, IEEE Recommended Practice for the
Measurement of Potentially Hazardous Electromagnetic Fields-
RFandMicrowave.
WARNING:ThisradiogeneratesRFelectromagneticenergy
duringtransmit mode.Thisradio isdesigned forand classi-
edasOccupational Use Only,meaningitmustbeusedonlyduring
thecourseofemploymentbyindividualsawareofthehazards,and
thewaystominimizesuchhazards.Thisradioisnotintendedforuse
bytheGeneral Populationinanuncontrolledenvironment.
CAUTION:ToensurethatyourexposetoRFelectromagnet-
icenergyiswithintheFCCallowablelimitsforoccupational
use,alwaysadheretothefollowingguidelines:
Please read this manual carefully to become familiar with the
features of this transceiver.
Do not transmit the radio without an antenna connected.
This radio is NOT approved for use by the general popula-
tion in an uncontrolled environment. This radio is restricted
to occupational use, work related operations only where the
radio operator must have the knowledge to control its RF ex-
posure conditions.
When transmitting, hold the radio in a vertical position with
its microphone 1 to 2 inches (2.5 to 5 cm) away from your
mouth and keep the antenna at least 1 inch (2.5cm) away
from your head and body.
The radio must be used with a maximum operating duty
cycle not exceeding 50 %, in typical Push-to-Talk (PTT) con-
gurations. DO NOT transmit for more than 50 % of total
radio use time (50 % duty cycle). Transmitting more than
50 % of the time can cause FCC RF exposure compliance re-
quirements to be exceeded.
To keep the Body Worn conguration with the Vertex Stan-
dard CLIP-18 belt-clip, reduce the maximum operating duty
cycle still more.
The radio is transmitting when the red LED on the top of the
radio is illuminated. You can cause the radio to transmit by
pressing the PTT button.
When operate the radio with the Vertex Standard CLIP-18
belt-clip, make the transmission time as short as possible, to
keep the Body Worn conguration.
Always use the FNB-V103LI, FNB-V104LI, FNB-V131LI-
UNI or FNB-V132LI-UNI Lithium-Ion Battery.
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Perform the battery charging where the ambient tempera-
ture range +50 °F to +104 °F (10 °C to +40 °C). Charge out
of this range could cause damage to the battery pack.
Battery Pack shall not be exposed to excessive heat such as
sunshine, re or the like.
Vertex Standard LMR, Inc.
Always use Vertex Standard authorized accessories.
Vertex Standard shall not be liable for any damage or ac-
cidents such as fire, leakage or explosion of batteries, etc.,
caused by the malfunction of non-Vertex Standard accesso-
ries.
This radio generates RF electromagnetic energy during
transmit mode. This radio is designed for and classified as
occupational use only, meaning it must be used only during
the course of employment by individuals aware of hazard-
ous, and the ways to minimize such hazardous. This radio is
not intended for use by the General Population in an uncon-
trolled environment.
Theinformationlistedaboveprovidestheuserwiththeinformation
neededtomakehimorherawareofRFexposure,andwhattodoto
assurethat thisradio operateswith theFCC RFexposurelimitsof
thisradio.
Electromagnetic Interference/Compatibility
During transmissions, this radio generates RF energy that can
possibly cause interference with other devices or systems. To
avoid such interference, turn off the radio in areas where signs
are posted to do so.
Do not operate the transmitter in areas that are sensitive to elec-
tromagnetic radiation such as hospitals, health care facilities,
aircraft, and blasting sites.
FCC LICENSE INFORMATION
This radio operates on communications frequencies which are
subject to FCC (Federal Communications Commission) Rules
and Regulations. FCC Rules require that all operators using Pri-
vate Land Mobile radio frequencies obtain a radio license before
operating their equipment.
acceSSOrieS & OptiOnS
FNB-V103LI
7.4V1380mAhLithium-IonBattery
FNB-V104LI
7.4V2300mAhLithium-IonBattery
FNB-V131LI-UNI
7.4V1380mAhLithium-IonBattery
FNB-V132LI-UNI
7.4V2300mAhLithium-IonBattery
VAC-300
DesktopRapidCharger(forFNB-V103LI/-V104LI)
VAC-6300
6-unitMultiCharger(forFNB-V103LI/-V104LI)
CD-58
DesktopCharger(forFNB-V131LI-UNI/-V132LI-UNI)
PA-55
ACAdapter(forCD-58)
VAC-6058
6-unitMultiCharger(forFNB-V131LI-UNI/-V132LI-UNI)
MH-37A4B
Earpiece/Microphone
MH-45B4B
Speaker/Microphone(NoiseCancelling)
MH-360S
Speaker/Microphone(SmallType)
MH-450S
Speaker/Microphone(MiniatureType)
VH-115S
Lightweightheadsetw/Boommic
VH-215S
Lightweightpaddedheadset,SingleSpeaker
VH-225S
Lightweightpaddedheadset,DualSpeaker
VCM-2
VehicleChargerMountAdapter(forVAC-300)
DCM-1
DesktopChargerBracket(forVAC-300)
ATV-8A
RubberAntenna134-151MHz
ATV-8B
RubberAntenna150-163MHz
ATV-8C
RubberAntenna161-174MHz
ATV-6XL
RubberAntenna134-174MHz(Untuned)
ATU-6A
RubberAntenna400-430MHz
ATU-6B
RubberAntenna420-450MHz
ATU-6C
RubberAntenna440-470MHz
ATU-6D
RubberAntenna450-485MHz
ATU-6F
RubberAntenna485-520MHz
CLIP-18
BeltClip
LCC-230
LeatherCase
CE99
ProgrammingSoftware
FIF-12
USBProgrammingInterface
CT-27
RadiotoRadioProgrammingCable
CT-106
PCProgrammingCable(forFIF-12)
Tilt the Belt Clip
Insert the Battery Pack
Push the bottom side
of the Battery Pack
vX-230 SerieS
OPerating manual
cOntrOlS & cOnnectOrS
Green Monitoron(orSide1orSide2switchisactivated)
Blinking Green BusyChannel(orSQLoff)
Glows Red Transmitting
Blinking Red BatteryVoltageisLow
Yellow ReceivingaSelectiveCall
Operating temperature range
(FOr eurOpean user)
Operation:–20°Cto+55°C
Battery Charging:+10°Cto+40°C
(Turntheradiooffwhilechargingthebattery)
mOn (mOnitOr)
Press(or Pressand hold)theassigned PFkey momentarilytodis-
abletheTone squelch.WhendisablestheTone squelch,theLED
indicatoronthetopoftheradiowillglowgreen.
SQl Off
Press(orPressandhold)theassignedPFkeytodisabletheNoise
andTonesquelch.Againpress(orPressandhold)theassignedPF
keytoresumenormal(quiet)NoiseandTonesquelchaction.
SQl Set
Youcanmanuallyadjustthesquelchlevelusingthisfunction.Press
the assigned PF key to toggle the squelch threshold level “High”
and“Low”.
lOw POwer
Press(orPressandhold)theassignedPFkeytosettheradio’s
transmittertothe“LowPower”mode,thusextendingbattery
life.Press(orPressandhold)theassignedPFkeyagaintoreturn
to“HighPower”operationwhenindifcultterrain.Whenthera-
dio’stransmitterissetto“LowPower”mode,theLEDindicator
onthetopoftheradiowillglowgreen.
Scan
The Scanning feature is used to monitor multiple channels pro-
grammedintothetransceiver.Whilescanning, theradiowillcheck
eachchannelforthepresenceofasignal,andwillstoponachannel
ifasignalispresent.
Toactivatescanning:
Press(orPressandhold)theassignedPFkey.
The scanner will search the channels, looking for active ones;
it will pause each time it nds a channel on which someone is
speaking. When the scanner is activated, the LED indicator on
thetopoftheradiowillglowgreen.
Tostopscanning:
Press(orPressandhold)theassignedPFkey.
OperationwillreverttothechanneltowhichtheCHknobisset.
KeY functiOnS
fOllOw-me Scan
“Follow-Me”ScanfeaturechecksaUser-assignedPriorityChannel
regularlyasyouscantheotherchannels.Thus,ifonlyChannels1,
3,and5(ofthe8availablechannels)aredesignatedfor“Scanning,”
theusermaynonethelessanychannelasthe“User-assigned”Prior-
ityChannelviathe“Follow-Me”feature.
Press the assigned PF key to activate “Follow-Me” scanning, then
turn the CH selector knob to the channel which you want to des-
ignate as the “User-Assigned Priority Channel”.When the scanner
stopsonan“active”channel,theUser-assignedPriorityChannelwill
automatically be checked every few seconds (interval programmed
byyourDealer).
Scan Set
Press(orpressandhold)theassignedPFkeytodeletetheCurrent
MemoryChannelfromtheScanningList.Whenyoudeleteachan-
nelfromtheScanningList,alowtonebeepwillsound.Torestorea
particular channel to your Scanning List, press (or press and hold)
theassignedPFkeyagain;ahightonebeepwillsound.
dw (dual watch)
The Dual Watch feature is similar to the Scan feature, except that
onlytwochannelsaremonitored:thecurrentoperatingchannel,and
the“Priority”channel.
ToactivateDualWatch:
Press(orPressandhold)theassignedPFkey.
Thescannerwillsearchthetwochannels;itwillpauseeachtime
itndsachannelonwhichsomeoneisspeaking.WhentheDual
Watch feature is activated, the LED indicator on the top of the
radiowillglowgreen.
TostopDualWatch:
Press(orPressandhold)theassignedPFkey.
OperationwillreverttothechanneltowhichtheCHknobisset.
ta Scan
PresstheassignedprogrammablekeytotoggletheTA(TalkAround)
scanfeature“On”and“Off.”
WhileTAscanisproceeding,theVX-230willsearchboththetrans-
mitandreceivefrequencies(andtheLEDindicatoronthetopofthe
radiowillglowgreen).Whenasignalisencounteredonthereceive
frequency,theVX-230willpauseuntilthesignaldisappears.
Whenasignalisencounteredonthetransmitfrequency,theVX-230
willcheck foractivity onthe receivefrequencyeveryfewseconds
(intervalprogrammedbyyourDealer).
ta (talk arOund)
Press (or Press and hold) the assigned PF key to activate the Talk
Aroundfeaturewhenyouareoperatingonduplexchannelsystems
(separatereceiveandtransmitfrequencies,utilizinga“repeater”
station).TheTalkAroundfeatureallowsyoutobypasstherepeater
stationandtalkdirectlytoastationthatisnearby.Thisfeaturehas
noeffectwhenyouareoperatingon“Simplex”channels,wherethe
receiveandtransmitfrequenciesarealreadythesame.
Whenthe“TA”function isactivated,theLEDindicator onthetop
oftheradiowillglowgreen.
tX Save diSaBle
Press(orPressandhold)theassignedPFkeytodisabletheTransmit
BatterySaver,ifyouareoperatinginalocationwherehighpoweris
almostalwaysneeded.
TheTransmit Battery Saver helps extend battery life by reducing
transmitpowerwhenaverystrongsignalfromanapparentlynearby
station is being received. Under some circumstances, though, your
hand-heldradiomaynotbeheardwellattheotherendofthecom-
municationpath,andhighpowermaybenecessaryatalltimes.
reSet
Press(orPressandhold)theassignedPFkeytosilencethereceiver
andresetforanothercall,whenacommunicationisnished.
call
Press(orPressandhold)theassignedPFkeytosendaprogrammed
2-or5-Tonesequentialtone.
artS (
autO range tranSpOnd SYStem
)
ThissystemisdesignedtoinformyouwhenyouandanotherARTS-
equippedstationarewithincommunicationrange.
During ARTSoperation, yourradioautomaticallytransmitsfor
about1secondevery55secondsinanattempttoshakehandswith
theotherstation.
Ifyouareoutofrangeformorethantwominutes,yourradiosenses
thatnosignalhasbeenreceived,aringingbeeperwillsound.Ifyou
subsequently move back into range, as soon as the other station
transmits,yourbeeperwillsound.
call 2, call 3
Press(orPressandhold)theassignedPFkeytosenda5-Tonese-
quentialtonegroupwhichispre-dened.
SPeed dial
YourDealermayhaveapre-programmedAuto-Dialtelephonenum-
bermemoryintoyourradio.Press(orPressandhold)theassigned
PF key to send the pre-programmedAuto-Dial telephone number.
TheDTMFtones sentduringthedialingsequence willbeheardin
thespeaker.
lOck
Press(orPressandhold)theassignedPFkeytolocktheCHknob,
PFkeys,andPTTswitch.Thepreciselockoutcongurationispro-
grammedbyyourVERTEX STANDARDdealer.
emergency
The VX-230 series includes an “Emergency” feature, which may
be useful, if you have someone monitoring on the same frequency
asyourtransceiver’schannel.ForfurtherdetailscontactyourVER-
TEX STANDARDdealer.
lOne wOrker
PressandholdtheassignedPFkeytotoggletheLoneWorkerfea-
ture“ON”and“OFF.”
TheLoneWorkerfeaturewillemitanaudiblealarmfor30seconds
at one second intervals when the LoneWorker Timer has expired.
IftheuserdoesnotresetthetimerbypressingthePTTswitch,the
radioswitchestotheEmergencymode.
Declaration of Conformity
We, YAESU UK Ltd. declare under our sole responsibility that the
following equipment complies with the essential requirements of
the Directive 1999/5/EC.
Type of Equipment: FM Transceiver
Brand Name: VERTEX STANDARD
Model Number: VX-231-D0-5 / VX-231-G6-5
Manufacturer: Vertex Standard Co., Ltd.
Address of Manufacturer: 4-8-8 Nakameguro Meguro-Ku, Tokyo
153-8644, Japan
Applicable Standards:
This equipment is tested and conforms to the essential require-
ments of directive, as included in following standards.
EN 300 086-2 V1.3.1
Radio Standard:
EN 301 489-01 V1.8.1
EMC Standard: EN 301 489-05 V1.3.1
EN 60950-1: 2006 +A11: 2009 +A1: 2010
Safety Standard:
The technical documentation as required by the Conformity As-
sessment procedures is kept at the following address:
Company: YAESU UK Ltd.
Address: Unit 12, Sun Valley Business Park, Winnall Close
Winchester, Hampshire, SO23 0LB, U.K.
attentiOn in Case OF use
This transceiver works on frequencies which are not gener-
allypermitted.
Forfrequencyallocation,
applyforalicenceatyour
localspectrummanagement
authority.
For actual usage contact
yourdealerorsalesshopinordertogetyourtransceiverad-
justedtotheallocatedfrequencyrange.
nOtiCe !
There are no owner-serviceable parts inside the transceiver.
AllservicejobsmustbereferredtoanauthorizedVERTEX
STANDARD Service Representative. Consult yourAutho-
rized VERTEX STANDARD Dealer for installation of op-
tionalaccessories.
DispOsal OF yOur eleCtrOniC anD
eleCtriC equipment
Productswiththesymbol (crossed-outwheeled
bin)cannotbedisposedashouseholdwaste.
Electronic and Electric Equipment should bere-
cycledatafacilitycapableofhandlingtheseitems
andtheirwastebyproducts.
In EU countries, please contact your local equipment sup-
plier representative or service center for information about
thewastecollectionsysteminyourcountry.
impOrtant nOtiCe FOr nOrth ameriCan users
regarDing 406 mhz guarD BanD
The U.S. Coast Guard and National Oceanographic andAt-
mosphericAdministration have requested the cooperation of
theU.S.FederalCommunicationsCommissioninpreserving
theintegrityoftheprotectedfrequencyrange406.0to406.1
MHz,whichisreservedforusebydistressbeacons.Donot
attempt to program this apparatus, under any circumstances,
foroperationinthefrequencyrange406.0-406.1MHzifthe
apparatusistobeusedinornearNorthAmerica.
Warning - Frequency band 406 - 406.1 MHz is reserved
for use ONLY as a distress beacon by the US Coast
Guard and NOAA. Under no circumstance should this
frequency band be part of the pre-programmed oper-
ating frequencies of this radio.
Part15.21:Changesormodicationstothisdevicenotex-
pressly approved byVertex Standard could void the user’s
authorizationtooperatethisdevice.
List of the practicable area
AUT BEL BGR CYP CZE DEU
DNK ESP EST FIN FRA GBR
GRC HUN IRL ITA LTU LUX
LVA MLT NLD POL PRT ROU
SVK SVN SWE CHE ISL LIE
NOR –––––
ThisdevicecomplieswithPart15oftheFCCrules.Opera-
tionissubjecttotheconditionthatthisdevicedoesnotcause
harmfulinterference.
The VX-230 provide [Side 1] and [Side 2] keys.These Pro-
grammable(PF)keysfunctionscanbecustomized(settoother
functions),viaprogrammingbyyourVERTEX STANDARD
dealer, to meet your communications/network requirements.
Some features may require the purchase and installation of op-
tional internal accessories. The possible PF key features are
illustrated below, and their functions are explained in the next
chapter.Forfurtherdetails,contactyourVERTEX STANDARD
dealer.
Forfuturereference,checktheboxbelowtoeachfunctionthat
has been assigned to the PF key on your particular radio, and
keepithandy.
functiOn
Programmable Key
[Press / Press & Hold]functiOn
Programmable Key
[Press / Press & Hold]
[Side 1] [Side 2] [Side 1] [Side 2]
None / / TA (Talk Around)/ /
Mon (Monitor)/ / TX Save Disable / /
SQL Off / / Reset / /
SQL Set / / Call / /
Low Power / / Call 2 / /
Scan / / Call 3 / /
Follow-Me Scan / / Speed Dial / /
Scan Set / / Lock / /
DW (Dual Watch)/ / Emergency –/–/
TA Scan / / Lone Worker –/–/
mOdel reference
mOdel freQuency tX POwer
VX-231-D0-5 134 - 174 MHz 5W
VX-231-G6-5 400 - 470 MHz 5W
VX-231-G7-5 450 - 520 MHz 5W
Warranty pOliCy
Vertex Standardwarrants, tothe originalpurchaser only,its
Vertex Standard manufactured communications products
againstdefects inmaterialsandworkmanshipunder normal
useandservice fora givenperiod of timefrom thedate of
purchase.
LimitedWarrantyDetails:
NorthAmericacustomers(USAandCanada):
http://www.vertexstandard.com/lmr/warranty-terms.aspx
CustomersoutsideofNorthAmerica:
Contacttheauthorizeddealerinyourcountry.
Copyright 2013
Vertex Standard LMR, Inc.
All rights reserved.
Printed in China
Product specificaties
Merk: | Vertex Standard |
Categorie: | Radio communicatie |
Model: | VX-231 |
Heb je hulp nodig?
Als je hulp nodig hebt met Vertex Standard VX-231 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Radio communicatie Vertex Standard
21 September 2022
21 September 2022
21 September 2022
21 September 2022
21 September 2022
21 September 2022
21 September 2022
21 September 2022
21 September 2022
21 September 2022
Handleiding Radio communicatie
- Radio communicatie Kenwood
- Radio communicatie Motorola
- Radio communicatie Albrecht
- Radio communicatie Baofeng
- Radio communicatie Furuno
- Radio communicatie GTV
- Radio communicatie Icom
- Radio communicatie Intek
- Radio communicatie Multi Care Systems
- Radio communicatie President
- Radio communicatie Rexon
- Radio communicatie Simrad
- Radio communicatie Spektrum
- Radio communicatie Stabo
- Radio communicatie Swissphone
- Radio communicatie Team
- Radio communicatie Wintec
- Radio communicatie Wouxun
Nieuwste handleidingen voor Radio communicatie
3 September 2023
3 September 2023
2 September 2023
26 Augustus 2023
26 Augustus 2023
31 Januari 2023
31 Januari 2023
14 Juli 2023
31 Januari 2023
13 Mei 2023