Vemer Sequencer 3 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Vemer Sequencer 3 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
MAC3 S.p.A. - 50013 CAMPI BISENZIO -FIRENZE -
(ITALY) - Via Maestri del lavoro 25/27
TEL.+39 055.88.77.672 - 055.88.77.372 -
055.88.79.276 - FAX. +39 055.88.77.068
e-mail: mac3@mac3.it - www.mac3.it
Nota: gli ingressi dei termici sono solo di segnalazione, non inibi-
scono l'attivazione delle pompe, né in sequenza né singolarmente.
4
General features
The is a device that provides the possibility toSequencer3
control and command 2 or 3 pumps in autoclave systems with
the help of :
- No. 1 working pressure switch PW that activates in
sequence (one at a time) various pumps.
- No. 2 pressure switches (PS1 - PS2) regulated at different
pressures (the pressure of PS1 is higher than that of PS2), but
yet inferior to that of the working pressure switch PW. These
pressure switches control the activation of two other pumps,
the purpose of which is to maintain the water pressure in the
system in the conditions requested when only one pump is
insufficient.
- A float switch prevents the functioning when no water
is present. When there is the presence of water, the contacts of
the float switch are closed (closes high).
Activation of the pumps in sequence by way of the
working pressure switch means that all the pumps connected to
the system are activated in rotation so that it is never the same
pump that starts out first. By using this criteria, all the pumps
can function in a uniform manner thus, avoiding the possibility
that one or more pumps can stop working due to prolonged
inactivity.
The Sequencer3 can function in the automatic or manual
mode by selecting this option by means of an external switch to
be connected to the the appropriate clamps. Two led on the
front panel permit one to see in which mode the device is
functioning; red led = Automatic;
yellow led = Manual.
In the Automatic mode, the controls that come from the
pressure switches are activated and consequently, automatically
activate or deactivate the pumps (power on/off).
In the Manual mode, the activation of the pumps can
only be done manually by way of appropriate push buttons
present on the front panel of the device. By connecting to
terminals 6-7-8-9, it's possible to command the Sequencer3 from
a distance. The control of two or three pumps can be selected
by means of a dipswitch present on inside of the front panel of
the device. With a screwdriver it is possible to remove the front
panel and reach the dipswitch.
SEQUENCER3
Electronic device for the control and
command of 2 or 3 pumps
dis.5812
Elecrtical wiring
SUPPLY VOLTAGE
CONTACTORS
24 23 22 21 20 19 18 17 16 15 14 13
123456789101112
DIPSWITCH
ON
1 2
Automatic
Manual
FS
1
2
PW
PS 2
SW1A
SW2A
COMMON
TS1
TS2
CONT.1
CONT.2
External push button
for manual command
FLOAT SWITCH
PB1 PB2 PB3
WIRING DIAGRAM
Electronic device for the control and command for 2 pumps
Internal push button for manual command
dnegeL
)seludomhtobrofdilav(
SF nidesolc(.nimhctiwstaolF
)retawfoecneserp
WP hctiwserusserpgnikroW
1SP 1hctiwserusserP
2SP 2hctiwserusserP
gnivomerybelbisseccahctiwspiD
.lenaptnorf
1
THERMAL SWITCH
MAC3 S.p.A. - 50013 CAMPI BISENZIO -
FIRENZE - (ITALY) - Via Maestri del lavoro 25/27
TEL.+39 055.88.77.672 - 055.88.77.372 -
055.88.79.276 - FAX. +39 055.88.77.068
e-mail: mac3@mac3.it - www.mac3.it


Product specificaties

Merk: Vemer
Categorie: Niet gecategoriseerd
Model: Sequencer 3

Heb je hulp nodig?

Als je hulp nodig hebt met Vemer Sequencer 3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Vemer

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd