Vemer Phono Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Vemer Phono (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
1
2
49
22
44
T1 T2
COMPLEMENTS FOR CIVIL SERIES
TECHNICAL INFORMATION
PHONOSounds indicators
1 Installation in ush-mounting boxes with a height of 45 mm
2 Terminals on the back of the device for connection of the two
external buttons with which to activate one or the other sound
3 Holes for tonal diusion
Phono is a flush-mounting not extractable ringtone with two types of sound.
The first two sounds ringtone simulates the siren effect and is suitable, for example, for alarms in rooms
such as bathrooms, etc., while the second three sounds ringtone reproduces the typical sound of a bell.
Phono is small and compact to be installed with discretion in any environment and is supplied with the
supports that allow the adaptation to the plates of the main civil series.
CONNECTION DIAGRAM
Front view Side view Diagram
DIMENSIONS (mm)
Code Model Description Colour Power supply
VE770300 Phono Grigia Bitonal ringtone compact size Grey 230 V~
VE770400 Phono Bianca Bitonal ringtone compact size White 230 V~
VE781100 Phono Bitonal ringtone compact size Silver Tech 230 V~
SOUNDS INDICATORS
80 dB acoustic buzzer at a distance of 30 cm
Compact size: 1 module only occupied in the ush-mounting box
Adapters that allow adaptability with the main civil series (see Adaptable plates”)
included in the package
Adaptable plates
ABB Mylos series
Ave S44 series
Bticino Axolute series
Bticino Axolute Air series
Bticino Light series
Bticino Living International series
Bticino LivingLight series (LL)
Bticino LivingLight Air series
Bticino Matix series
Gewiss Chorus series
Vimar Arké series
Vimar Eikon series
Vimar Eikon Evo series
Vimar Plana series
For information on the possibility of using dierent plates
contact the technical assistance service
REFERENCE STANDARDS
Compliance with the Community Directives: 2014/35/EU (LVD) and 2014/30/EU (EMCD)
is declared in reference to the following harmonized standards: • EN 62080 • EN 61000-6-1 • EN 61000-6-3
Power supply V AC 230 (-15% ÷ +10%)
Frequency 50/60Hz
Mounting ush
Maximum cables section mm21.5
Acoustic signal 80 dB at 30 cm
Operating temperature 0 ÷ 50°C
Storage temperature -10 ÷ +60°C
Operating humidity 20% ÷ 90% RH
non condensing
Protection degree IP40
GENERAL CHARACTERISTICS
Notes duration: 500 ms
Pause between the notes: duration 100 ms
Notes duration: 500 ms
Pause between the notes: duration 100 ms
N1 N1 N1N2 N2 N2
T1
Pressing the key T1: two-tone sound (siren effect)
Note: if the keys T1 and T2 are pressed simultaneously,
the sound relative to the key T1 is executed.
T2
Pressing the key T2: three-tone sound (bell effect)
N1 N3 N2N2 N1 N3
3
PHONO-ENG-072019


Product specificaties

Merk: Vemer
Categorie: Niet gecategoriseerd
Model: Phono

Heb je hulp nodig?

Als je hulp nodig hebt met Vemer Phono stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Vemer

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd