Velleman VMA328 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Velleman VMA328 (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
VMA328
UV LIGHT SENSOR GUVA-S12SD MODULE
USER MANUAL
VMA328
V. 01 23/03/2018 2 ©Velleman nv –
USER MANUAL
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could
harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it
should be taken to a specialized company for recycling. This device should be returned to your
distributor or to a local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman®! Please read the manual thoroughly before bringing this device into service.
If the device was damaged in transit, do not install or use it and contact your dealer.
2. Safety Instructions
ï‚· This device can be used by children aged from 8 years and above, and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning the use of the device in a
safe way and understand the hazards involved. Children shall not play with the device.
Cleaning and user maintenance shall not be made by children without supervision.
ï‚· Indoor use only.
Keep away from rain, moisture, splashing and dripping liquids.
3. General Guidelines
 Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.
ï‚· Familiarise yourself with the functions of the device before actually using it.
ï‚· All modifications of the device are forbidden for safety reasons. Damage caused by user
modifications to the device is not covered by the warranty.
ï‚· Only use the device for its intended purpose. Using the device in an unauthorised way
will void the warranty.
ï‚· Damage caused by disregard of certain guidelines in this manual is not covered by the
warranty and the dealer will not accept responsibility for any ensuing defects or
problems.
ï‚· Nor Velleman nv nor its dealers can be held responsible for any damage (extraordinary,
incidental or indirect) – of any nature (financial, physical…) arising from the possession,
use or failure of this product.
ï‚· Due to constant product improvements, the actual product appearance might differ from
the shown images.
ï‚· Product images are for illustrative purposes only.
ï‚· Do not switch the device on immediately after it has been exposed to changes in
temperature. Protect the device against damage by leaving it switched off until it has
reached room temperature.
ï‚· Keep this manual for future reference.
4. What is Arduino®
Arduino® is an open-source prototyping platform based in easy- -use hardware and software. Arduinoto ® boards
are able to read inputs light-on sensor, a finger on a button or a Twitter message and turn it into an output – –
– activating of a motor, turning on an LED, publishing something online. You can tell your board what to do by
sending a set of instructions to the microcontroller on the board. To do so, you use the Arduino programming
language (based on Wiring) and the Arduino® software IDE (based on Processing).
Surf to and for more information. www.arduino.cc www.arduino.org
VMA328
V. 01 23/03/2018 3 ©Velleman nv –
5. Overview
VMA 832
Extend your light-sensing spectrum with this analog UV sensor module. It uses a UV photodiode, which can ue
detect the 240-370 nm range of light (which covers UVB and most of UVA spectrum). The signal level from
the photodiode is very small, in the nano-ampere level, so we tossed on an opamp to amplify the signal to a
more manageable volt-level.
operating voltage: 3.3 V to 5 V
output voltage: 0 V to 1 V (0-10 UV index)
response time: 0. s 5
accuracy: +/- 1 UV Index
r iation wavelength: 200- ad 370 nm
operating temperature: - °C to +85 20 °C
current consumption: 5 mA
dimensions: 24 x 15 mm
6. Connection
Connection.
Vcc======5V
Gnd======G nd
S======A0
7. Example 1
// CODE BEGIN
void setup() {
// initialize serial communication at 9600 bits per second:
Serial.begin(9600);
// set the analog pin as input
pinMode(A0, INPUT);
}
// the loop routine runs over and over again forever:
void loop()
{
// read the input on analog pin 0:
int sensorValue = analogRead(A0);
// print out the value you read:
Serial.println(sensorValue);
delay(300); // delay in between reads for stability
}
// CODE END


Product specificaties

Merk: Velleman
Categorie: Niet gecategoriseerd
Model: VMA328
Kleur van het product: Black,White
Breedte: 24 mm
Hoogte: 15 mm
Merkcompatibiliteit: Alle merken
Compatibiliteit: Arduino
Type product: Lichtsensor

Heb je hulp nodig?

Als je hulp nodig hebt met Velleman VMA328 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Velleman

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Senal

Senal ME-220-CL Handleiding

21 November 2024
Senal

Senal ASM-4 Handleiding

21 November 2024
Senal

Senal CS-88 Handleiding

21 November 2024
Senal

Senal CSP-162 Handleiding

21 November 2024
Senal

Senal ASM-3 Handleiding

21 November 2024
Senal

Senal ASM-5 Handleiding

21 November 2024
Senal

Senal PS-48B Handleiding

21 November 2024
D-Link

D-Link DWA-142 Handleiding

21 November 2024
Senal

Senal CSP-142 Handleiding

21 November 2024
Senal

Senal SCI-3212 Handleiding

21 November 2024