Velleman VMA326 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Velleman VMA326 (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
VMA326
LINE TRACKING SENSOR TCRT5000 MODULE
USER MANUAL
VMA326
V. 01 19/03/2018 2 ©Velleman nv –
USER MANUAL
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could
harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it
should be taken to a specialized company for recycling. This device should be returned to your
distributor or to a local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman®! Please read the manual thoroughly before bringing this device into service.
If the device was damaged in transit, do not install or use it and contact your dealer.
2. Safety Instructions
ï‚· This device can be used by children aged from 8 years and above, and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning the use of the device in a
safe way and understand the hazards involved. Children shall not play with the device.
Cleaning and user maintenance shall not be made by children without supervision.
ï‚· Indoor use only.
Keep away from rain, moisture, splashing and dripping liquids.
3. General Guidelines
 Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.
ï‚· Familiarise yourself with the functions of the device before actually using it.
ï‚· All modifications of the device are forbidden for safety reasons. Damage caused by user
modifications to the device is not covered by the warranty.
ï‚· Only use the device for its intended purpose. Using the device in an unauthorised way
will void the warranty.
ï‚· Damage caused by disregard of certain guidelines in this manual is not covered by the
warranty and the dealer will not accept responsibility for any ensuing defects or
problems.
ï‚· Nor Velleman nv nor its dealers can be held responsible for any damage (extraordinary,
incidental or indirect) – of any nature (financial, physical…) arising from the possession,
use or failure of this product.
ï‚· Due to constant product improvements, the actual product appearance might differ from
the shown images.
ï‚· Product images are for illustrative purposes only.
ï‚· Do not switch the device on immediately after it has been exposed to changes in
temperature. Protect the device against damage by leaving it switched off until it has
reached room temperature.
ï‚· Keep this manual for future reference.
4. What is Arduino®
Arduino® is an open-source prototyping platform based in easy- -use hardware and software. Arduinoto ® boards
are able to read inputs light-on sensor, a finger on a button or a Twitter message and turn it into an output – –
– activating of a motor, turning on an LED, publishing something online. You can tell your board what to do by
sending a set of instructions to the microcontroller on the board. To do so, you use the Arduino programming
language (based on Wiring) and the Arduino® software IDE (based on Processing).
Surf to and for more information. www.arduino.cc www.arduino.org
VMA326
V. 01 19/03/2018 3 ©Velleman nv –
5. Overview
VMA 632
The line tracking sensor based on TCRT5000 is a type of infrared reflectance sensor, and is commonly used in
line following robots, mounted at the bottom of the robot chassis. The line tracking sensor works by detecting
reflected light coming from its own infrared LED and by measuring the amount of reflected infrared light, it
can detect transitions from light to dark (lines) or even objects directly in front of it.
sensor adopts TCRT5000, high sensitivity
sensitivity adjustable by potentiometer
Working voltage 3.3 V to 5 V
operating current : 20 mA
digital switch output (0 and 1)
two fixed bolt holes for convenient installation
small board PCB size: 42 x 10.5 mm
power indicator light (red) and digital switch output indicator light (green)
detection reflection distance: 1- 25 mm
6. Pin Layout
S
digital output (black = low, white = high)
V+
5 VDC power
G
ground
7. Example
The example shows that when the sensor detects black area, the a S pin output is a low TTL signal. The ’s
LED13 switches off while the light on this module switches on. On the contrary, LED13 switches on. L


Product specificaties

Merk: Velleman
Categorie: Niet gecategoriseerd
Model: VMA326
Kleur van het product: Black, Blue, White
Breedte: 40 mm
Hoogte: 10.5 mm
Merkcompatibiliteit: Alle merken
Compatibiliteit: Arduino
Type product: Module voor opsporen/volgen

Heb je hulp nodig?

Als je hulp nodig hebt met Velleman VMA326 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Velleman

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Festo

Festo VPPI Handleiding

21 November 2024
Festo

Festo SFAB Handleiding

21 November 2024
Festo

Festo SFAH Handleiding

21 November 2024
Festo

Festo DRRD-12 Handleiding

21 November 2024
Festo

Festo SDE3 Handleiding

21 November 2024
Festo

Festo SFTE Handleiding

21 November 2024
Festo

Festo CRVZS-5 Handleiding

21 November 2024