Velleman K8044 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Velleman K8044 (16 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
Total solder points: 293
Difficulty level:
beginner 1o o o 2 3þ 4o 5advanced
K8044
12V, Ten channel light
effect generator
ILLUSTRATED ASSEMBLY MANUAL H8044IP-1
þTen, 12V/400mA outputs.
þTo control cold-cathode fluorescent lamps (using FLPS adapter), light
bulbs, LED’s and “solid state” relays, ...
þFor use as advertisement lighting, party lights, discos, eye-catcher,...
þTen pre-programmed light patterns selectable with a push button.
þThe number of used channels is adjustable.
þAdjustable speed.
þLed indication for every output.
þ12V operation possible for use in cars.
Specifications :
Power supply : 12V DC
Outputs : 12V DC/400mA per channel (Total : max 4A)
Dimensions : 140 x 100 x 27mm / 5,5 x 3,9 x 1,1”
Options (Velleman ordernumbers) :
ÚPower supply for cold-cathode fluorescent lamps : FLPS (300mm) or
FLPS1 (100mm)
ÚCold-cathode fluorescent lamps : FL(xx) – (100 or 300mm).
Modifications reserved.
Features:
2
VELLEMAN Components NV
Legen Heirweg 33
9890 Gavere
Belgium Europe
www.velleman.be
www.velleman-kit.com
3
1. Assembly (Skipping this can lead to troubles ! )
Ok, so we have your attention. These hints will help you to make this project success-
ful. Read them carefully.
1.1 Make sure you have the right tools:
A good quality soldering iron (25-
40W) with a small tip.
Wipe it often on a wet sponge or cloth, to keep it clean; then apply solder to the
tip, to give it a wet look. This is called ‘thinning’ and will protect the tip, and en-
ables you to make good connections. When solder rolls off the tip,
it needs cleaning.
Thin raisin-core solder. Do not use
any flux or grease.
A diagonal cutter to trim excess wires. To avoid injury
when cutting excess leads, hold the lead so they
cannot fly towards the eyes.
Needle nose pliers, for bending leads, or to hold components in
place.
Small blade and Phillips screwdrivers. A basic range is ne.
For some projects, a basic multi-meter is required, or
might be handy
1.2 Assembly Hints :
Make sure the skill level matches your experience, to avoid disappointments.
Follow the instructions carefully. Read and understand the entire step before you
perform each operation.
Perform the assembly in the correct order as stated in this manual
Position all parts on the PCB (Printed Circuit Board) as shown on the drawings.
Values on the circuit diagram are subject to changes.
Values in this assembly guide are correct*
Use the check-boxes to mark your progress.
Please read the included information on safety and customer service
* Typographical inaccuracies excluded. Always look for possible last minute manual
updates, indicated as ‘NOTE’ on a separate leaflet.
0.000
Assembly hints


Product specificaties

Merk: Velleman
Categorie: Niet gecategoriseerd
Model: K8044

Heb je hulp nodig?

Als je hulp nodig hebt met Velleman K8044 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Velleman

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Festo

Festo VPPI Handleiding

21 November 2024
Festo

Festo SFAB Handleiding

21 November 2024
Festo

Festo SFAH Handleiding

21 November 2024
Festo

Festo DRRD-12 Handleiding

21 November 2024
Festo

Festo SDE3 Handleiding

21 November 2024
Festo

Festo SFTE Handleiding

21 November 2024
Festo

Festo CRVZS-5 Handleiding

21 November 2024