Velleman CU2200 Handleiding

Velleman Toegangscontrolesysteem CU2200

Lees hieronder de 📖 handleiding in het Nederlandse voor Velleman CU2200 (63 pagina's) in de categorie Toegangscontrolesysteem. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/63

CU2200

WIRELESS SMS ALARM MESSENGER

DRAADLOZE SMS-ALARMMELDER

SYSTÈME DE MESSAGERIE D'ALARME SMS SANS FIL

SISTEMA DE ALARMA INALÁMBRICO POR MENSAJES SMS

DRAHTLOSER SMS-ALARM

USER MANUAL

GEBRUIKERSHANDLEIDING

NOTICE D’EMPLOI

MANUAL DEL USUARIO

BEDIENUNGSANLEITUNG

CU2200_v5 VELLEMAN 2

CU2200 – WIRELESS SMS ALARM MESSENGER

1. Introduction

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm

the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a

specialized company for recycling. This device should be returned to your distributor or to a local recycling

service. Respect the local environmental rules.

If in doubt, contact your local waste disposal authorities.

Thank you for buying a VELLEMAN product! The CU2200 is equipped with a very reliable Siemens 16 bit MCU and can

be used for numerous applications (except for medical and aerospace applications) such as industrial equipment or

area monitoring, data capturing, home or car security… Please read the manual thoroughly before bringing this device

into service. If the device was damaged in transit, don't install or use it and contact your dealer.

2. Description

POW: 7~12VDC power input

GND: ground

AD1/AD2: N/A

IN1, IN3, IN4, IN5, IN6, IN7, IN8, GND: 12VDC alarm input, 7~15mA, common ground opto-coupled

IN2+, IN2-: 7~12VDC input

OUT1: relay output, max. 1A, 24VDC, 1A, 120VAC, NC/NO (selected by jumper on board)

3. Connection

Relay output jumper

1 2 3

▪ ▪ ▪

1-2 short NC

2-3 short NO (default)

CU2200_v5 VELLEMAN 3

Sound Monitoring

The CU2200 automatically picks up any phone call after eight rings. By connecting a microphone to the CU2200, you

will be able to hear all actions in the room.

4. Quick Setup

• Press the yellow button so as to eject the card caddy. Insert

the SIM card with the contacts facing down. Press the card

back into the CU2200.

• Connect the 12VDC power supply and wait until the red LED

turns on.

• Send following SMS message to the CU2200:

PWD:1234,STATUS%.

• Your mobile phone will receive an SMS reply within 30

seconds reporting the health status.

NOTE: The SIM card in the CU2200 must be activated by a

provider like a regular SIM card in a mobile phone. Make

sure to activate the caller ID service.

5. Alarm Response Time

The messenger will start the initialization after connection to the power supply. This procedure will take about 30

seconds.

In case of an alarm, the unit will send an SMS message to the control centre and to 4 pre-programmed phone

numbers. The control centre can be disabled in order for the phone numbers to receive the alarm message sooner.

6. GSM Network Connectivity

• If the GSM network is suddenly inaccessible or disconnected during the SMS sending, the message will be lost.

• When the CU2200 has failed to send the message due to an inaccessible network, the unit will search for the

network and keep sending the SMS when the network has been re-established.

• When failing to send SMS messages, the CU2200 will memorize up to 10 messages and send them as soon as

the network is re-established.

LED 1 – green status LED

Rapid flashing on/off

GSM module normal operation

Flashing on/off

GSM network connection problem

Reason:

Antenna not connected

No SIM card

Defective SIM card

Defective GSM module

LED 2 – red network LED

Normal operation

Flashing on/off

Searching GSM network

Connecting to network

Receiving SMS messages

Sending SMS messages

Phone dialling

Product specificaties

Merk:	Velleman
Categorie:	Toegangscontrolesysteem
Model:	CU2200
Gewicht:	480 g
Luidspreker:	Nee
Automatische nummerherhaling:	Ja
Frequentie:	925-960/880-912/1805-1880/1710-1785 MHz
Stroomverbruik:	500 mA
Aantal kanalen:	8 kanalen
Afmetingen (B x D x H):	135 x 105 x 30 mm
Stroomverbruik (typisch):	2 W
Bedrijfstemperatuur (T-T):	-20 - 50 °C
Ingebouwde sirene:	Nee
DC-in vereisten:	7-12V / 2A
Stroom in standby:	50 mA