V-Tac VT-11108 Handleiding

V-Tac Lamp VT-11108

Lees hieronder de ๐Ÿ“– handleiding in het Nederlandse voor V-Tac VT-11108 (2 pagina's) in de categorie Lamp. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
SOLAR LED FLOODLIGHT
INTRODUCTION & WARRANTY
INSTALLATION DIAGRAM
TWO OPTIONAL WORKING MODES
FEATURES
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions
carefully before starting the installation and keep this manual handy for future reference. If you have any
another query, please contact our dealer or local vendor from whom you have purchased the product. They are
trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The
warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company
gives no warranty against damage to any surface due to incorrect removal and installation of the product. This
product is warranted for manufacturing defects only.
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST
DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
NOTICE & WARNING
1. This is a solar powered lamp, please install it in a location where can
get enough sunshine.
2. Please note the lighting time depends on sunshine duration & weather.
3. The lamp will light up automatically at dusk.
4. Recommended installation height is 3~4Mtr.
5. The lamp is equipped with an internal battery pack, which is replace-
able.
If any need, please contact seller for correct new battery pack.
6. Please connect the lamp to solar panel to get solar charging.
7. Built-in intelligent IC is with over-charge, over-discharge protection,
safe and durable.
8. Non-professionals please do not disassemble the lamp.
9. Please do not dispose the battery with household garbage to avoid
explosion.
Caution, risk of electric shock.
This marking indicates that this
product should not be disposed
of with other household wastes.
TECHNICAL DATA:
MODE A:
MODE B:
MODEL VT-11108
LUMENS 950LM
WATTS 8W
NO. OF LEDs 64 PCS
BATTERY TYPE ๎งฏ๎ฅ˜๎งณ๎™ณ๎˜ƒ๎˜พ๎๎žš๎š๎๎žต๎ต๎˜ƒ๎˜‘๎œ‚๎žฉ๎œž๎žŒ๎Ÿ‡๎ฅ•๎˜ƒ๎งฐ๎งฌ๎งฌ๎งฌ๎ต๎œ‚๎š
BEAM ANGLE 120ยฐ
SENSING RANGE ๎ฉ„๎งด๎˜ƒ๎™„๎œž๎žš๎œž๎žŒ๎ž
CHARGING TIME ๎งฑ๎ฅฒ๎งฒ๎˜ƒ๎˜ฌ๎ฝ๎žต๎žŒ๎ž๎˜ƒ๎™ž๎žต๎ถ๎ฏ๎๎๎š๎žš๎˜ƒ๎˜’๎š๎œ‚๎žŒ๎๎๎ถ๎
WORKING TIME ๎™„๎๎ถ๎˜ƒ๎งฎ๎งฌ๎˜ƒ๎ฅฒ๎˜ƒ๎˜ƒ๎™„๎œ‚๎Ÿ†๎˜ƒ๎งฒ๎งฌ๎˜ƒ๎˜ฌ๎ฝ๎žต๎žŒ๎ž
MATERIAL ABS+PC
Solar Powered Auto On/Off Two Work Modes Cordless to Install
Ultra-thin Foldable Adjustable 8 in 1 Multi Functions
1PC * Lamp 2PCS * Screws with
Flat & Spring Washers
(for Wall Mount๏ผ‰
2PCS * Screws
(for Hanging)
2PCS * Stickers 1PC * User Manual
User Manual
Patent Design
8-in-1
20
PAP
On/Off/Select working mode
Please rotate the lamp head and press the button to select working mode.
1. Press the button 1st time, lamp turns on to Mode A.
2. Press the button 2nd time, lamp shines once and turns to Mode B.
3. Press the button 3rd time, lamp turns o๏ฌ€.
When battery power is more than 30% :
When battery power is less than 30% :
Lamp automatically lights up at night and
turns to 100% brightness when motion
is detected in the range โ‰ค8mtrs, then dim
to lower brightness after 20 seconds
of no motion.
Lamp automatically lights up at night and
turns to 100% brightness when motion
is detected in the range โ‰ค8mtrs, then turns
o๏ฌ€ after 20 seconds of no motion.
120ยฐ 120ยฐ
120ยฐ 120ยฐ
Lamp automatically lights up at night and keep 100% brightness, after 5 hours or when battery power is less
than 30%, lamp turns to Energy Saving Mode: Lamp automatically turns to 100% brightness when motion is
detected in the range โ‰ค8mtrs, then turns o๏ฌ€ after 20 seconds of no motion.
After 5 hours or when the battery
power is less than 30%
120ยฐ
KIND REMIND:
When the lamp is not connected to the solar panel, the light sensor is disabled. Whether it is day
or night, the lamp will stay on after it is turned on.
INSTALLATIONS:
180ยฐ
180ยฐ
360ยฐ
โ‘ 
โ‘ก
Rotate the lamp head to adjust lighting directions, 180ยฐ adjustable.
Rotate the screw to adjust solar panel vertically, 180ยฐ adjustable.
Hold the lamp base and rotate the lamp post to adjust whole lamp angle, 360ยฐ adjustable.
โ‘ 
โ‘ก
โ‘ข
โ‘ข
INSTALLATION B: SPLIT WALL MOUNT
INSTALLATION C: LAMP WALL MOUNT WITH MAGNET
INSTALLATION D: LAMP WALL MOUNT WITH STICKER
MORE OPTIONAL INSTALLATION
INSTALLATION E: LAMP WALL MOUNT WITH SCREWS
INSTALLATION E: PILLAR MOUNT
PORTABLE LAMP
WIDE APPLICATIONS:
1. Integrated wall mount for garden, entrance, garage, courtyard, fence, campus etc.
2. Split wall mount for roof, corner, pathway, bus station, attic, pavilion etc.
3. Hanging for balcony light, emergency light etc.
4. Portable as ๏ฌ‚ash light, camping light, emergency use etc.
5. Standable as work light, pillar light, ground light, wall washer light etc.
6. It can be magnetized on any ๏ฌ‚at metal surface for ๏ฌ‚exible use.
7. Lamp can be sticked directly for ๏ฌ‚exible use.
INSTALLATION A: INTEGRATED WALL MOUNT
The recommended mounting height is 2-4Mtrs.
โ‘  Drill 2 holes (ฯ†6mm, depth 50mm) with a spacing of 58mm.
โ‘ก Fix the expansion plugs in the holes.
โ‘ข Use screws with flat & spring washers to fix the lamp on the wall. Adjust solar panel angle and lighting
direction as needed.
Depth:
50mm
ฯ†6mm
58mm
โ‘  โ‘ก โ‘ข
๏”ƒ Drill 2 holes (ฯ†6mm, depth 50mm) with a spacing of height 58mm.
๏”„ Fix the expansion plugs in the holes.
๏”… Use screws with flat & spring washers to fix the lamp on the wall.
๏”† Drill 2 holes (ฯ†6mm, depth 50mm) with a spacing of width 120.3mm.
๏”‡ Fix the expansion plugs in the holes, then fix the screws into the expansion plugs, keeping the screws
protruding 3-5mm.
๏”ˆ Hang the lamp on the screws.
๏”‰ Connect the cable of the solar panel to the lamp.
๏”ƒ๎˜ƒ๎˜ฆ๎๎Ÿ†๎˜ƒ๎žš๎š๎œž๎˜ƒ๎ž‰๎ฝ๎ž๎๎žŸ๎ฝ๎ถ๎˜ƒ๎ฝ๎œจ๎˜ƒ๎žš๎š๎œž๎˜ƒ๎ž๎žŸ๎œ๎ฌ๎œž๎žŒ๎˜ƒ๎ฝ๎ถ๎˜ƒ๎žš๎š๎œž๎˜ƒ๎ฏ๎œ‚๎ต๎ž‰
๏”„๎˜ƒ๎™—๎ฏ๎œ‚๎œ๎œž๎˜ƒ๎งฎ๎˜ƒ๎ž๎žŸ๎œ๎ฌ๎œž๎žŒ๎ž๎˜ƒ๎˜ƒ๎ž‰๎žŒ๎ฝ๎ž‰๎œž๎žŒ๎ฏ๎Ÿ‡๎˜ƒ๎ฝ๎ถ๎žš๎ฝ๎˜ƒ๎žš๎š๎œž๎˜ƒ๎™ค๎Ÿ๎ฝ๎ฅฒ๎œš๎๎žŒ๎œž๎œ๎žŸ๎ฝ๎ถ๎˜ƒ๎˜ฌ๎œ‚๎ถ๎๎๎ถ๎๎˜ƒ๎˜ฌ๎ฝ๎ฏ๎œž๎ž๎˜ƒ๎ฝ๎œจ๎˜ƒ๎žš๎š๎œž๎˜ƒ๎ฏ๎œ‚๎ต๎ž‰
๏”…๎˜ƒ๎™š๎œž๎ต๎ฝ๎Ÿ€๎œž๎˜ƒ๎žš๎š๎œž๎˜ƒ๎ž๎žŸ๎œ๎ฌ๎œž๎žŒ๎˜ƒ๎œ๎ฝ๎Ÿ€๎œž๎žŒ๎˜ƒ๎ฝ๎ถ๎˜ƒ๎žš๎š๎œž๎˜ƒ๎ฏ๎œ‚๎ต๎ž‰
๏”†๎˜ƒ๎˜ฆ๎๎Ÿ†๎˜ƒ๎žš๎š๎œž๎˜ƒ๎ฏ๎œ‚๎ต๎ž‰๎˜ƒ๎ฝ๎ถ๎˜ƒ๎žš๎š๎œž๎˜ƒ๎Ÿ๎œ‚๎ฏ๎ฏ๎ฅ˜
๏”‡๎˜ƒ๎™ค๎žต๎žŒ๎ถ๎˜ƒ๎ฝ๎ถ๎˜ƒ๎žš๎š๎œž๎˜ƒ๎ฏ๎๎๎š๎žš๎˜ƒ๎œ‚๎ถ๎œš๎˜ƒ๎žš๎œž๎ž๎žš๎˜ƒ๎žš๎š๎œž๎˜ƒ๎ฏ๎œ‚๎ต๎ž‰
๎™…๎ฝ๎žš๎œž๎ฅ—๎˜ƒ
โ€ข To charge the lamp, connect the cable of the solar panel to the lamp
โ€ข Sensor will not work if the lamp is not connected in solar panel
๏”ƒ๎˜ƒ๎˜ƒ๎™„๎œ‚๎ฌ๎œž๎˜ƒ๎ž๎žต๎žŒ๎œž๎˜ƒ๎žš๎š๎œ‚๎žš๎˜ƒ๎žš๎š๎œž๎˜ƒ๎ฏ๎œ‚๎ต๎ž‰๎˜ƒ๎š๎œ‚๎ž๎˜ƒ๎œž๎ถ๎ฝ๎žต๎๎š๎˜ƒ๎œ๎š๎œ‚๎žŒ๎๎œž๎˜ƒ๎žš๎ฝ๎˜ƒ๎œ๎œ‚๎žŒ๎žŒ๎Ÿ‡๎ฅ˜
๏”„๎˜ƒ๎™ค๎žต๎žŒ๎ถ๎˜ƒ๎ฝ๎ถ๎˜ƒ๎žš๎š๎œž๎˜ƒ๎ฏ๎๎๎š๎žš๎˜ƒ๎œ‚๎ถ๎œš๎˜ƒ๎žš๎œž๎ž๎žš๎˜ƒ๎žš๎š๎œž๎˜ƒ๎ฏ๎œ‚๎ต๎ž‰
๎™…๎ฝ๎žš๎œž๎ฅ—๎˜ƒ
โ€ข To charge the lamp, connect the cable of the solar panel to the
lamp
โ€ข Sensor will not work if the lamp is not connected in solar panel
๏”ƒ๎˜ƒ๎˜’๎š๎œž๎œ๎ฌ๎˜ƒ๎žš๎š๎œž๎˜ƒ๎ต๎œ‚๎๎ถ๎œž๎žš๎˜ƒ๎ฝ๎ถ๎˜ƒ๎žš๎š๎œž๎˜ƒ๎œ๎œ‚๎œ๎ฌ๎ฅ˜๎˜ƒ๎™„๎œ‚๎ฌ๎œž๎˜ƒ๎ž๎žต๎žŒ๎œž๎˜ƒ๎žš๎š๎œž๎žŒ๎œž๎ฅ›๎ž๎˜ƒ๎ถ๎ฝ๎˜ƒ
๎ฝ๎œ๎ฉ๎œž๎œ๎žš๎˜ƒ๎œ‚๎žฉ๎œ‚๎œ๎š๎œž๎œš๎˜ƒ๎ฝ๎ถ๎˜ƒ๎žš๎š๎œž๎˜ƒ๎ต๎œ‚๎๎ถ๎œž๎žš
๏”„๎˜ƒ๎˜ฆ๎๎Ÿ†๎˜ƒ๎žš๎š๎œž๎˜ƒ๎ฏ๎œ‚๎ต๎ž‰๎˜ƒ๎ฝ๎ถ๎˜ƒ๎žš๎š๎œž๎˜ƒ๎ต๎œž๎žš๎œ‚๎ฏ๎˜ƒ๎‡๎œ‚๎žš๎˜ƒ๎ž๎žต๎žŒ๎œจ๎œ‚๎œ๎œž๎ฅ˜
๎™…๎ฝ๎žš๎œž๎ฅ—๎˜ƒ
โ€ข To charge the lamp, connect the cable of the solar
panel to the lamp
โ€ข Only PIR Sensor will work if the lamp is not connected
to the solar panel
๏”ƒDrill 2 holes (ฯ†8mm, depth 50mm) with a spacing of 120.3mm.
๏”„ Fix the expansion plugs in the holes.
๏”…Use screws with flat & spring washers to fix the lamp on the ground. Adjust solar panel angle and lighting
direction as needed.
๏”ƒ๎˜ƒ๎˜˜๎žŒ๎๎ฏ๎ฏ๎˜ƒ๎งฎ๎˜ƒ๎š๎ฝ๎ฏ๎œž๎ž๎˜ƒ๎ฅพ๎ข”๎งด๎ต๎ต๎ฅ•๎˜ƒ๎œš๎œž๎ž‰๎žš๎š๎˜ƒ๎งฑ๎งฌ๎ต๎ต๎ฅฟ๎˜ƒ๎Ÿ๎๎žš๎š๎˜ƒ๎œ‚๎˜ƒ๎ž๎ž‰๎œ‚๎œ๎๎ถ๎๎˜ƒ๎ฝ๎œจ๎˜ƒ๎งญ๎งฎ๎งฌ๎ฅ˜๎งฏ๎ต๎ต๎ฅ˜
๏”„๎˜ƒ๎˜ฆ๎๎Ÿ†๎˜ƒ๎žš๎š๎œž๎˜ƒ๎œž๎Ÿ†๎ž‰๎œ‚๎ถ๎ž๎๎ฝ๎ถ๎˜ƒ๎ž‰๎ฏ๎žต๎๎ž๎˜ƒ๎๎ถ๎˜ƒ๎žš๎š๎œž๎˜ƒ๎š๎ฝ๎ฏ๎œž๎ž๎ฅ˜
๏”…๎˜ƒ๎˜ฆ๎๎Ÿ†๎˜ƒ๎žš๎š๎œž๎˜ƒ๎ฏ๎œ‚๎ต๎ž‰๎˜ƒ๎ฝ๎ถ๎˜ƒ๎žš๎š๎œž๎˜ƒ๎Ÿ๎œ‚๎ฏ๎ฏ๎ฅ˜
๏”†๎˜ƒ๎™ค๎žต๎žŒ๎ถ๎˜ƒ๎ฝ๎ถ๎˜ƒ๎žš๎š๎œž๎˜ƒ๎ฏ๎๎๎š๎žš๎˜ƒ๎œ‚๎ถ๎œš๎˜ƒ๎žš๎œž๎ž๎žš๎˜ƒ๎žš๎š๎œž๎˜ƒ๎ฏ๎œ‚๎ต๎ž‰
๎™…๎ฝ๎žš๎œž๎ฅ—๎˜ƒ
โ€ข To charge the lamp, connect the cable of the solar panel to the lamp
โ€ข Sensor will not work if the lamp is not connected in solar panel
The connection cable is 3m long, please confirm the installation
position of the solar panel and the lamp before installation.
The lamp head can be removed according to the arrows on the
side of the lamp for split installation.
โ‘ โ‘กโ‘ข
โ‘ฃโ‘คโ‘ฅ
โ‘ฆ
Depth:
50mm
ฯ†6mm
58mm
120.3mm
3-5mm
โ‘ โ‘ก
Metal flat surface
โ‘ โ‘กโ‘ขโ‘ฃโ‘ค
โ‘  โ‘ก โ‘ข โ‘ฃ
Depth:
50mm
Depth:
50mm
โ‘ โ‘กโ‘ข
๎™„๎œ‚๎๎ถ๎œž๎žš
๎™ค๎Ÿ๎ฝ๎ฅฒ๎œš๎๎žŒ๎œž๎œ๎žŸ๎ฝ๎ถ๎˜ƒ๎˜ฌ๎œ‚๎ถ๎๎๎ถ๎๎˜ƒ๎˜ฌ๎ฝ๎ฏ๎œž๎ž
MULTI-LANGUAGE
MANUAL QR CODE
Please scan the QR code
to access the manual in
multiple languages.


Product specificaties

Merk: V-Tac
Categorie: Lamp
Model: VT-11108

Heb je hulp nodig?

Als je hulp nodig hebt met V-Tac VT-11108 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Lamp V-Tac

V-Tac

V-Tac VT-92200 Handleiding

18 Augustus 2024
V-Tac

V-Tac VT-92150 Handleiding

18 Augustus 2024
V-Tac

V-Tac VT-8315 Handleiding

18 Augustus 2024
V-Tac

V-Tac VT-9-202-N Handleiding

18 Augustus 2024
V-Tac

V-Tac VT-9-156S Handleiding

18 Augustus 2024
V-Tac

V-Tac VT-9-206S Handleiding

18 Augustus 2024
V-Tac

V-Tac VT-9-111 Handleiding

18 Augustus 2024
V-Tac

V-Tac VT-9-112 Handleiding

18 Augustus 2024
V-Tac

V-Tac VT-90201 Handleiding

18 Augustus 2024
V-Tac

V-Tac VT-92100 Handleiding

18 Augustus 2024

Handleiding Lamp

Nieuwste handleidingen voor Lamp