US Blaster MAX 7143 Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor US Blaster MAX 7143 (4 pagina's) in de categorie DJ Party Music. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
USER`S MANUAL
-16%
+16%
PITCH
0%
PITCH
FOLDER
TRACK
OUT
SD/USB
TIME
SINGLE/
CONTINUE
BPM EFX
CUE
TAP
FX
TAP
BPM
SARCH
E
PAN
PHASE
ECHO
FLANGER
PGM
MAX 7341
MAX 7341
1
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE THE COVER (OR
BACK) THERE ARE NO SERVICEABLE PARTS INSIDE.REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lighting flash with arrowhead symbol,within an equilateral triangle,is intended to
alert the user to the presence of un insulated “dangerous voltage”within the products
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance(servicing) instructions in the
literature accompanying the appliance.
WARNING:
To reduce the risk of fire or electrical shock, do not expose this appliance to rain or
moisture. Electrical equipment should NEVER be kept or stored in damp environments.
The products do not Compatible with HCSD card and Mp3 display stick.
DANGER:
Invisible laser radiation when open and interlock failed or defeated.avoid direct
exposure to beam.
CAUTION:
This product utilizes a laser.use of controls or adjustments other than those Specified
herein may result in hazardous radiation exposure.
IMPORTANT
Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
2
USER MANUAL
MA DE IN CHI NA
OUTPUT
R
L
ON
OFF
POWER
RISK OF FIRE
REPLACE FUSE
AS MARKED
250mAL 250V
AC~2 20 V- 24 0V /5 0H z
20WATT S
1234
GND
35
-16%
+16%
PITCH
0%
PITCH
FOLDER
TRACK
OUT
SD/USB
TIME
SINGLE/
CONTINUE
BPM EFX
CUE
TAP
FX
TAP
BPM
CS AR HE
PAN
PHASE
ECHO
FLANGER
5 6 7 8 9 10
25
26
27
28
29
30
31
32
33
34
11 12
13 14
15
16
17
18
19 20
21
22
23
24
PGM
35
MAX 7341
34
1 . STEREO MAIN OUTPUT
Unbalanced RCA connectors controlled by the master fader.
2 . POWER SWITCH
Press the power switch to turn the unit on. To switch the POWER off press the POWER switch
again.
3 . FUSES
Under normal operation the fuses should not blow. A blown fuse usually indicates
an overload or fault condition. To change the fuse, remove the power cord, pry off
the fuse block with a small flathead screwdriver and change the blown fuses.
Refer to the specification for fuse current ratings.
4 . AC CORD
Used this cable to connect the AC mains power to the unit
5 . SD PORT
Insert the SD card.
6 . USB PORT
Insert the USB.
7 . DISPLAY
TRACK
CUE MIN. SEC.
SINGLE CONTINUE ROBO LOOP
ELAPSED TOTAL REMAIN PROGRAM REPEAT 1 ALL PITCH
,
A B CDEF
G
HI
J
KLNM
A. OPERATING MODE
These indicate the operating mode of the SD CARD or USB player
: The SD CARD or USB player is playing the SD CARD or USB.
: The playback is paused.
B. TIME MODE INDICATORS
ELAPSED:
TOTAL REMAINING:
REMAINING:
C. “PROGRAM” INDICATOR
This indicates the player is in programme mode.
D . REPEAT INDICATOR
REPEAT 1:
REPEAT ALL:
E. TIME BAR INDICATOR
This is a graphical representation of the “Minute, second and frame displays” (C).
F. “PITCH” INDICATOR
This indicates the pitch slider (12) is activated.
G. “LOOP” INDICATOR
This indicates the SD CARD or USB player is currently playing in a preset loop.
H. PITCH DISPLAY
This indicates the playback speed (pitch), from 16% to +16%.
I. PLAY MODE INDICATORS
SINGLE:
CONTINUE:
ROBO:
J. MINUTE, SECOND AND FRAME DISPLAYS
These displays shows the current time, the value changes depends on the time mode selected.
K. “CUE” INDICATOR
This indicates a new cue is set.
L. TRACK NUMBER
This displays the position, number of track of the SD CARD or USB, which is playing.
M. FOLDER DISPLAY
N. ID3 COMMUNICATION DISPLAY
The SD CARD or USB player is in single mode.
The SD CARD or USB player is in continue mode.
The SD CARD or USB player is in relay mode.
The SD CARD or USB player is playing the selected track repeatedly.
The SD CARD or USB player is playing the entire SD CARD or USB repeatedly.
Played time of the selected track.
Tot a l remaining play time of the SD CARD or USB.
Remaining play time of the selected track.
8 . BPM EFX
9 . FX TAP BUTTON
10. CUE TAP BUTTON
11.
first : control the SD card function.
- Press the second: control the USB function.
- Press along time ,after display “P-OFF” and will shut off the power for SD card/USB.
- If you take away the SD card/USB, then pressing the botton, will start up the SD/USB.
15. SKIP>>I BUTTON
In the “TRACK”mode,is next track.
IN BUTTON ( LOOP SYSTEM )
This button sets the beginning of the loop. The Loop indicator on the display flashes.
12. OUT BUTTON ( LOOP BUTTON )
When you press this button, you set the end point of the seamless loop and you start the loop.
To finish the loop, press again this button.
13. RELOOP BUTTON ( LOOP SYSTEM )
This button is used to start the last saved loop.
14. SD/USB BUTTON
- Press the


Product specificaties

Merk: US Blaster
Categorie: DJ Party Music
Model: MAX 7143

Heb je hulp nodig?

Als je hulp nodig hebt met US Blaster MAX 7143 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden