UNIC CDE6P Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor UNIC CDE6P (28 pagina's) in de categorie Koffiemolen. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28
version 3.0.3
Instruction manual
Manuel d’instruction
For commercial use
À usage commercial
Precision coee tamper
EN
FR
2
Dear coee enthusiast,
First o we would like to congratulate you with your very own
Puqpress and thank you for showing condence in our product.
The Puqpress is a fully automatic tamper developed by people with
a passion for perfect coee and elegant technology.
Our specialists have spent all their knowledge and devotion in
developing the ultimate tool to standardise the tamping pressure, a
crucial parameter for a perfect cup of coee.
Please investigate this manual closely so you and your customers
will enjoy the Puqpress to the fullest and store the manual away
safely after reading. If anything remains unclear please feel free to
contact your authorized dealer or contact us directly.
We wish you all the fun and perfection with your new Puqpress!
Greetings from Amsterdam,
Barista Technology BV
3
precision coee tamper
EN
Table of content
1 4Safety
1.1 Safety instructions 4
1.2 Personel requirements 5
2 5Technical data
3 5Description
4 7Set-up and basic adjustment
4.1 Adjustment of port-a-lter clamp 7
4.2 Usage location 9
4.3 Electrical installation 9
5 10Operation
5.1 Normal operation of the tamper 10
5.2 Tamping force adjustment 10
5.3 Clean modus 11
6 12Operating faults
7 Service 13
8 13Spare parts
9 14Warranty conditions
4
1. Safety
Read all instructions and information in this manual and
other literature that might be included in the package.
1.1 Safety instructions
1. The appliance is not to be used by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
2. Children being supervised not to play with the appliance
3. This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given supervision
or instruction concerning use of the appliance in a safe way and
understand the hazards involved
4. Cleaning and user maintenance shall not be made by children without
supervision.
5. Do not immerge cables , plugs or the device itself into water or other
liquids to avoid electric shock, or injury.
6. Always remove the electrical plug from the outlet prior to conducting
maintenance or cleaning work on the tamper.
7. Do not use the device if the cord or plug is damaged or in case of
damage or breakage. Any required repairs may only be conducted
by authorized service personnel. For this reason, please contact a
customer service repair facility or your dealer.
8.
manufacturer holds absolutely no liability for damages occurring from
failure to observe these instructions.
9. Do not insert your hand (or other limbs) between the tamper disk and
lower clamp.
10. Adjust the lower clamp to optimum working position to block
access to dangerous moving parts (tamper base). Check step 4.
Do not make any modifications or alternations to the tamper. The
6
2 Main housing – middle cover
3 Upper clamp
4Induction sensor
5Tamper disk
1
2
3
5
4
7
8
9
10
11
12
13
6
8
4. Slightly loosen the Allen key screws (pos. 7) with the provided
Allen key wrench size 4mm and pull down the port-a-lter clamp.
5. Insert the port-a-lter in the clamp and push the clamp upwards
until the port-a-lter is slightly clamped.
6. Refasten the Allen key screws slightly. Do not fasten the screw
entirely.
9
EN
7.
8.
too loose, start again at step 4.
4.2 Usage location
Place the tamper on a level, vibration-free surface.
Never operate the tamper in moist, or even worse, in wet
surroundings!
4.3 Electrical installation
A damaged power cable must be replaced immediately.
Let the defective cords and plugs be replaced immediately
at a customer service repair facility or your dealer.
1. Insert the power cord in the socket at the back side of the
tamper.
2. Insert the plug into the corresponding grounded outlet.
WARNING: Portafilter may not
wiggle with correct
lower clamp setting.
If portatiler wiggles
operator may
have access to
dangerous
moving parts
11
precision coee tamper
EN
5.3 Clean modus
It is important to clean your tamper disk (pos.5) regularly.
Use a brush to clean it. Do not use your ngers / hands.
For cleaning the tamper disk proceed the following:
1. Press the clean modus button .
2. The tamper moves down in nal position.
3. Clean the tamper disk using a brush or similar object.
4. Press the clean modus button again and tamper moves upwards
in initial starting position.
Clean modus button
Cleaning
Tamping Forc e (kg)


Product specificaties

Merk: UNIC
Categorie: Koffiemolen
Model: CDE6P

Heb je hulp nodig?

Als je hulp nodig hebt met UNIC CDE6P stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Koffiemolen UNIC

UNIC

UNIC CDE37T Handleiding

11 April 2023
UNIC

UNIC CDE37J Handleiding

11 April 2023
UNIC

UNIC CDE37S Handleiding

11 April 2023
UNIC

UNIC CDE37Z Handleiding

11 April 2023
UNIC

UNIC CDE6P Handleiding

11 April 2023

Handleiding Koffiemolen

Nieuwste handleidingen voor Koffiemolen