Uni-T UT-203R Handleiding

Uni-T Multimeter UT-203R

Lees hieronder de 📖 handleiding in het Nederlandse voor Uni-T UT-203R (52 pagina's) in de categorie Multimeter. Deze handleiding was nuttig voor 62 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/52
EnglishSvenskaNorskSuomiDeutsch
UNI-T UT-203R
Digital Clamp Meter
TĂĽngamperemeter
Tangamperemeter
Pihtiampeerimittari
Zangenamperemeter
Art.no Model
36-8126 UT-203R Ver. 20201207
3
English
Digital Clamp Meter
Art.no. 36-8126 Model UT-203R
Please read theentire instruction manual before using
theproduct and then save it for future reference.
We reserve theright for any errors in text or images
and any necessary changes made to technical data.
In theevent of technical problems or other queries,
please contact our Customer Services (see address
details on theback).
Safety
Warning:
The instruction manual contains information
necessary for thesafe operation of theclamp meter.
Disregarding this information can lead to serious
injury or death. Make sure that you have read and
understood theentire instruction manual before using
theproduct.
The clamp meter has been tested in accordance with
EN 61010-1, 61010-2-032/033 and conforms to
theelectromagnetic radiation protection standard in
accordance with EN61326-1, and also conforms to
measurement category CAT III 300 V, CAT II 600 V,
and pollution category II.
The function of theclamp meter should be checked
on aknown voltage source before you start measuring.
• Always check thethat theproduct looks intact
and has no damage before using it. Do not use
this clamp meter if it or thetest leads appear to
be damaged, or if you suspect that thetool might
not work properly.
• Never use theclamp meter if thebattery cover or
battery compartment is open.
• Make sure that your fingers are behind thefinger
guards when using thetest leads.
• Set themeasurement range with thefunction
knob before starting to take readings.
Themeasurement range must not be changed
during ameasurement.
• Do not measure voltages higher than 600 V DC
or 600 V AC RMS between apower point and
earth connection.
• Replace thebattery if thebattery warning symbol
appears on thedisplay. A weak battery can cause
incorrect results and thereby pose asafety hazard.
• Neither theclamp meter nor its accessories must
be dismantled or modied in any way.


Product specificaties

Merk: Uni-T
Categorie: Multimeter
Model: UT-203R

Heb je hulp nodig?

Als je hulp nodig hebt met Uni-T UT-203R stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Multimeter Uni-T

Handleiding Multimeter

Nieuwste handleidingen voor Multimeter