Ubiquiti Networks UDM-PRO Handleiding

Ubiquiti Networks Netwerkkaart/adapter UDM-PRO

Lees hieronder de 📖 handleiding in het Nederlandse voor Ubiquiti Networks UDM-PRO (24 pagina's) in de categorie Netwerkkaart/adapter. Deze handleiding was nuttig voor 5 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/24

UniFi Dream Machine Pro Rack-Mount Brackets (Qty. 2) Bracket Screws (Qty. 8)

Mounting Screws (Qty. 4) Cage Nuts (Qty. 4) Security Screw

2.5" HDD Screws (Qty. 4) Power Cord Rubber Feet (Qty. 4)

Package Contents

System Requirement

Either of the following is required:

iOS or Android™ Mobile Device with UniFi Network App Installed

Web Browser: Google Chrome (Other browsers may have limited functionality)

IMPORTANT: We strongly recommend using UPS backup and power

UDM-Pro Quick Start Guide

Touchscreen Display

HDD LED

RJ-45 Speed/Link/Activity LED (Ports 1 - 9)

Hardware Overview

Bootup Animation Initializing.

Location Animation

This indicates that you clicked Locate in the UniFi

Controller software. The software will also display

the location of the device on the map.

Flashing White Indicates Read/Write Activity

Steady Amber Indicates HDD Error

Off No Link

Amber

Link Established at 10/100 Mbps

Flashing Indicates Activity

Green Link Established at 1 Gbps

UDM-Pro Quick Start Guide

SFP+ Speed/Link/Activity LED (Ports 10 - 11)

HDD Bay

RJ45 LAN (Ports 1 - 8)

RJ45 Internet (Port 9)

SFP+ Internet (Port 10)

SFP+ LAN (Port 11)

Reset Button

USP RPS LED

Off No Link

Green

Link Established at 1 Gbps

Flashing Indicates Activity

White

Link Established at 10 Gbps

Flashing Indicates Activity

Install a 3.5" or 2.5" HDD (not included) to use the device as an NVR for UniFi

Protect.

The RJ45 ports support 10/100/1000 Ethernet connections. By default, they are

set to DHCP Server with the fallback IP address, 192.168.1.1/24.

The RJ45 port supports a 10/100/1000 Ethernet connection. Set to DHCP Client

by default.

The SFP+ port supports a 1/10G Ethernet connection. Set to DHCP Client by

default.

The SFP+ port supports a 1/10G Ethernet connection. By default, it is set to

DHCP Server with the fallback IP address, 192.168.1.1/24.

Resets to factory defaults. The device should be running after bootup is complete.

Press and hold the Reset button for about 10 seconds until the display indicates

that the device has reset itself. After a few seconds, the LED will turn off, and the

device will automatically reboot.

UDM-Pro Quick Start Guide

Product specificaties

Merk:	Ubiquiti Networks
Categorie:	Netwerkkaart/adapter
Model:	UDM-PRO
Kleur van het product:	Wit
Gewicht:	3900 g
Breedte:	442.4 mm
Diepte:	285.6 mm
Hoogte:	43.7 mm
LED-indicatoren:	Ja
Frequentie van processor:	1700 MHz
Processormodel:	ARM Cortex-A57
Vermogensverbruik (max):	33 W
DC voltage input:	12 V
Certificering:	CE, FCC, IC
Intern geheugen:	4096 MB
Type processor:	Ja
Rack-montage:	Ja
Aantal voedingen:	1
Redundante voeding:	Ja
Flash memory:	16000 MB
Vermogenstoevoer inclusief:	Ja
Switchingcapaciteit:	- Gbit/s
MAC-adrestabel:	- entries
10G support:	Ja
Switch type:	Managed
Aantal basis-switching RJ-45 Ethernet-poorten:	9
Type basis-switching RJ-45 Ethernet-poorten:	Gigabit Ethernet (10/100/1000)
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Code geharmoniseerd systeem (HS):	85176990
Aantal moduleslots SPF+:	2
Doorvoercapaciteit:	3.5 Gbit/s