Tycon Systems POE-EXT-GD-HP Handleiding

Tycon Systems Wifi-repeater POE-EXT-GD-HP

Lees hieronder de 📖 handleiding in het Nederlandse voor Tycon Systems POE-EXT-GD-HP (2 pagina's) in de categorie Wifi-repeater. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

- - Gigabit Power over Ethernet Extender

Gigabit PoE Extender

User's manual

Gigabit Power over Ethernet Extender- -

Product

Outdoor waterproof Gigabit PoE Extender 1(PoE IN) into 1(PoE OUT) 25W

Description

Ethernet and PoE connections both restrict cable distances to 100 meters be-

tween network ports. To overcome this distance limit, network installers can

simply connect a PoE Extender in line with the Cat 5e or Cat 6 cable (Outdoor - - -

type).

With a Gigabit PoE Extender, PDs (such as IP Security Cameras, wireless ac-

cess points) can be installed at greater distances than 100 meters from one

another. By connecting the PoE Extender for every extra 100 meters of cable,

both Ethernet and PoE can be extended up to 300 meters, depending on PDs

power required and power source.

The Gigabit PoE Extender does not require any additional power supply and

the connected PDs are fed by a single PoE switch or mid span, which simplifies -

installation. The PoE Extender offers two Gigabit Ethernet ports, which are both

configured automatically for link speed, duplex and crossover and the full rate -

network throughput is maintained.

The PoE IN connection accepts power on pins 1,2.3,6 and 4,5.7,8 and con-

forms to IEEE802.3af/at PoE specification, Mode A and Mode B. PoE OUT

connection provides up to 25W with an IEEE802.3AT 30W input. PoE Out pro-

vides power on pins 1,2(V+) and 3,6(V-).

Features:

• Compatible with IEEE802.3af and IEEE802.3at.

• Extends the range of PoE and Gigabit Ethernet an additional

100 meters.

• No additional power supply is required.

• Automatically detects and protects equipment from being

damaged by incorrect installation.

• Gigabit Full rate network throughout the whole extended -

distance.

• Wall-Mountable design.

• Easy plug play installation.-and-

• IP66 Rated (Fully Weatherproof and Outdoor Rated).

- - Gigabit Power over Ethernet Extender

Item Descripon

No. of channels 1(PoE IN) into 1(PoE OUT)

Pass Through Data Rates 10/100/1000 Mbps half/full duplex

Power over Ethernet Input Pin Assignment and Polarity:

Both 1,2( ). 3,6 (+) and 7,8 ( ). 4,5 (+)- -

Power over Ethernet Output Pin Assignment and Polarity:

1,2 (+). 3,6 ( )-

Output Power: up to 25W

Connectors Shielded RJ 45, EIA 568A and 568B -

Network cables Outdoor type shielded category 5 (or higher)

Dimensions 185mm x 45mm x 45mm

Mounting Wall or shelf

Environment Indoor or Outdoor

Environmental Conditions Operating Ambient Temperature: 25 to 55-℃

Operating Humidity: Maximum 100%Storage

Temperature: 30 to 70 Storage Humidity:-℃

Maximum 95%, Non condensing-

Regulatory Compliance IEEE 802.3af (PoE), IEEE 802.3at (PoE+)

Specifications

Typical Application

Gigabit Power over Ethernet Extender- -

Typical Maximum Distances

Multiple PoE Extenders can be connected every 100 meters to obtain

greater distances. The actual figures depend on specific operating

conditions. The ranges shown below are based on 24 AWG or heavi-

er Cat 5e or Cat 6 cable.- -

Examples for Low Power PoE Devices (PoE Class 2 under 6 watts)

PoE Source

PoE switch

(802.3af, Output

voltage 50V)

15W mid span -

(802.3af, Output

voltage 50V)

PoE+ switch

(802.3at, Output

voltage 50V)

30W mid span -

(802.3at, Output

voltage 50V)

Maximum Distances

200m 200m 300m 300m

Examples for PoE+ Devices (PoE Class 4 under 22 watts and

802.3at compliant)

PoE Source

PoE switch

(802.3af, Output

voltage 50V)

15W mid span -

(802.3af, Output

voltage 50V)

PoE+ switch

(802.3at, Output

voltage 50V)

30W mid span -

(802.3at, Output

voltage 50V)

Maximum Distances

Not applicable Not applicable 200m 200m

Product specificaties

Merk:	Tycon Systems
Categorie:	Wifi-repeater
Model:	POE-EXT-GD-HP
Kleur van het product:	Zwart
Gewicht:	240 g
Breedte:	45 mm
Diepte:	185 mm
Hoogte:	45 mm
Soort:	Netwerkontvanger
Internationale veiligheidscode (IP):	IP66
Plug and play:	Ja
Bekabelingstechnologie:	10/100/1000Base-T(X)
Netwerkstandaard:	IEEE 802.3af, IEEE 802.3at
Maximaal bereik:	300 m
Stroomverbruik (typisch):	2 W
Bedrijfstemperatuur (T-T):	-25 - 55 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 100 procent
Ondersteundende kabel types:	Cat5, Cat6