Tunturi Platinum Cross Sprinter Handleiding

Tunturi Electrische fiets Platinum Cross Sprinter

Lees hieronder de 📖 handleiding in het Nederlandse voor Tunturi Platinum Cross Sprinter (76 pagina's) in de categorie Electrische fiets. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/76
U S E R M A N U A L
2
English
Contents
Installation -
Important safety instructions 2
Console 3
Assembly 4
Moving and storage 9
Fitness -
Basics on exercising 9
Heart rate 9
Maintenance -
Maintenance 9
Management mode 10
Troubleshoot 10
Technical data 10
Product information -
Exploded view 74
Parts list 75
Welcome to the world of Tunturi exercising!
Your choice shows that you really want to invest in your
well being and condition; it also shows you really value
high quality, safe and motivating product as your training
partner. Whatever your goal in training, we are certain
this is the training equipment to get you there. You’ll find
information about using your exercise equipment and
what makes for efficient training at Tunturi’s website at
WWW.TUNTURI.COM
Important Safety Instructions
This owners manual is an essential part of your training
equipment: reading all instructions in this manual before
you start using this appliance. The following precautions
must always be followed.
Note about your health
Before you start any training, consult a physician to
check your state of health.
If you experience nausea, dizziness or other abnor-
mal symptoms while exercising, stop your workout at
once and consult a physician.
To avoid muscular pain and strain, begin each
workout by warming up and end it by cooling down
(slow pedaling at low resistance). Don’t forget to
stretch at the end of the workout.
Note about the exercise environment
The equipment is not to be used outdoors.
Place the equipment on a firm, level surface. Place
the equipment on a protective base to avoid any
damages to the floor beneath the equipment.
Make sure that the exercising environment has
adequate ventilation. To avoid catching cold, do not
exercise in a draughty place.
In training, the equipment tolerates an environment
measuring +10°C to +35°C. The equipment can
be stored in temperatures ranging between -15°C
and +40°C. Air humidity in the training or storage
environment must never exceed 90%.
Keep hands away from all moving parts.
Note about the equipment
If children are allowed to use the equipment, they
should be supervised and taught to use the equipment
properly, keeping in mind the child’s physical and
mental development and their personality.
Before you start using the equipment, make sure that
it functions correctly in every way. Do not use faulty
equipment.
Press the keys with the tip of the finger; your nails may
damage the key membrane.
Never lean on the interface.
Never remove the side covers. Do not step on the
frame casing.
Only one person may use the equipment at a time.
Hold the stationary handlebar for support when get-
ting on or off the equipment.
Wear appropriate clothing and shoes when exerci-
sing.
Protect the meter from sunlight and always dry the
surface of the meter if there are any drops of sweat
on it.
Further information on warranty terms can be found in
the warranty booklet included with the product.
Please note that the warranty does not cover damage
due to shipping or negligence of adjustment or main-
tenance instructions described in this manual.
The equipment must not be used by persons weighing
over 150 kg.
Make sure the equipment is unplugged before car-
rying out any assembly or maintenance procedures.
Do not attempt any servicing or adjustments other
than those described in this guide. Everything else
must be left to someone familiar with the maintenance
of electromechanical equipment and authorized
under the laws of the country in question to carry out
maintenance and repair work.
Never drop or insert any object into any openings.
SAVE THIS INSTRUCTION MANUAL
3
Cross sprinter
Operation
Power the console on by pressing any key.
Enter Quick start operation by simply pressing the
start key. The time will count up from zero.
You may set a workout time by using the Time up
and down keys. When you press the Start key the
time will count down to zero from the set time. After
pressing start you can use the up and down keys to
switch the time to count up or count down.
Press the start/stop button to Pause the timer and also
to resume the timer when it is in Pause mode.
Press the Reset key to reset all the data.
For Heart Rate readings you must wear a heart rate
transmitter. The console will pick up the transmitter
signal and display your heart rate automatically.
Console
The power for the console is provided by 3 AA alkaline
batteries (provided) and will operate on rechargeable
NiCd AA batteries. Once the batteries are installed the
console will power on, the Time window will display the
total usage time, the Distance window will display the
total usage distance reading and the RPM window will
display the software version. The usage time shows how
long the elliptical has been in use and the distance shows
how many virtual miles the elliptical has gone.
If the console does not detect a speed signal, or key
activations, it will go to sleep to protect battery life. To
wake the console up you can press any key.
Function keys
1. Start/Stop: Starts and stops the program timer.
2. Time - (Down): Used to set workout time before the
start key is pressed. The down key will decrease the
time setting by 1 minute for each key press. The time
will change more rapidly when the key is held down
for 2 seconds. The key is also used to switch the time
reading to count down (remaining time).
3. Reset: Performs a complete reset of the console.
4. Time + (up): Used to set workout time before the start
key is pressed. The up key will increase the time
setting by 1 minute for each key press. The time will
change more rapidly when the key is held down for
2 seconds. The key is also used to switch the time
reading to count up (elapsed time).
Display
5. Time: Displays workout time two ways; either count
up (accumulated time) or count down (remaining
time), depending on your preference selected before
starting the timer.
6. RPM: Displays the current pedaling speed as Revoluti-
ons Per Minute.
7. Distance: Displays virtual distance traveled in miles
or kilometers (units selected through Management
Mode, see page 9 for details).
8. Heart Rate: Displays heart rate in beats per minute
when a heart rate chest belt transmitter is worn and
detected by the console. The heart rate receiver is
compatible with Polar coded transmitters.


Product specificaties

Merk: Tunturi
Categorie: Electrische fiets
Model: Platinum Cross Sprinter

Heb je hulp nodig?

Als je hulp nodig hebt met Tunturi Platinum Cross Sprinter stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Electrische fiets Tunturi

Handleiding Electrische fiets

Nieuwste handleidingen voor Electrische fiets