Tripp Lite UPB-10K4-S2U Handleiding

Tripp Lite powerbank UPB-10K4-S2U

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite UPB-10K4-S2U (16 pagina's) in de categorie powerbank. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/16

Owner’s Manual

10,400mAh Dual Port

Mobile Power Bank

Model: UPB-10K4-S2U

Español 5 • Français 9 • Русский 13

PROTECT YOUR INVESTMENT!

and ultimate peace of mind.

You could also win an

ISOBAR6ULTRA surge protector—

a $100 value!

www.tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

17-05-362-9336ED.indb 1 6/7/2017 1:34:16 PM

General Safety Instructions

Package Contents

Product Features

• Make sure the power bank is fully charged prior to use.

• Please use a cable suitable for your device when charging it with the power bank.

•

When charging the power bank, it is recommended you use the included USB Micro-B cable.

• Under a low-battery condition, the LEDs will turn off while charging a device. Recharge

the power bank as soon as possible to avoid shortening the battery life.

•

The battery should be charged at least every three months to avoid shortening the battery life.

• It is recommended to disconnect the charging device upon being fully charged to avoid

further use of battery.

• When the power bank enters protection mode (LEDs turn off and power bank will not

charge) caused by issues such as a short circuit, use an external charger to charge it and

bring it back to normal operation.

• Keep the power bank away from ﬁre, and avoid temperatures above 113°F (45°C).

• Do not get the power bank wet or immerse it in water.

• Do not wash the power bank with corrosive cleaner.

• Do not squeeze or puncture the power bank so as to avoid electrolyte leakage of lithium-

ion battery.

• Do not attempt to disassemble, modify or ﬁx this device on your own.

• Do not use a damaged cable or power charger to charge the power bank.

• Please recycle this device at an appointed disposal location for lithium-ion batteries.

• UPB-10K4-S2U

• 3 ft. USB Micro-B Cable

• Owner’s Manual

• Charge multiple phones, tablets or other mobile devices on the go, without the need for a

power outlet

• Dual USB ports provide up to 5V 1A and 5V 2.4A of power respectively, for the

simultaneous charging of mobile devices

• USB 5V 2.4A port features built-in auto-sensing functionality for optimal compatibility

with connected devices

• Sleek, portable design is perfect for on-the-go use

• 10,400mAh capacity lets you charge at maximum power draw for hours

• 4 battery power LEDs show remaining battery capacity

• Automatic power-off turns off the LEDs when not in use

• Short circuit, overvoltage, overcurrent, overcharge and overdischarge protection for safe,

reliable charging

17-05-362-9336ED.indb 2 6/7/2017 1:34:17 PM

System Requirements

Optional Accessories

USB Device Charging Instructions

Power Bank Charging Instructions

• Smartphone, tablet or other mobile USB device

• M100-Series USB to Lightning® Cables

• U030-Series USB 2.0 A to 5-Pin Mini-B Cables

• U038-Series USB 2.0 A to USB Type-C Cables

• UR05C-Series Micro-B Charge-Only Cables

• U326-Series USB 3.0 A to Micro-B Cables

• U420-003 USB 3.1 Gen 1 (5 Gbps) Type-C M/M Cable

Notes:

• Before charging your devices for the ﬁrst time, you should ﬁrst fully charge the power bank

• There is a power button located on top of the power bank. When pressed once, the LEDs will

illuminate to indicate how much battery capacity is left. When held down, this button turns off the

LEDs and stops any device charging.

• When charging a USB device, the LEDs illuminate to indicate the battery capacity level

LED Status Battery Capacity

100-75%

50-75%

25-50%

1-25%

1. Connect your mobile devices to the USB-A ports on the power bank using the included

USB Micro-B cable or a USB cable suitable for your device.

2. The devices will begin charging, with the LEDs operating per the above notes.

Notes:

• There is a power button located on top of the power bank. When pressed once, the LEDs will

illuminate to indicate how much battery capacity is left. When held down, this button turns off the

LEDs and stops any device charging.

• When charging the power bank, the LED indicator lights will illuminate to indicate the level of battery

capacity

LED Status Battery Capacity

100%

75-99%

50-75%

25-50%

1-25%

1. Using the included USB Micro-B cable, connect the Micro-B port on the power bank to

the USB-A port on a computer or USB charger.

2. The device will begin charging, with the LEDs operating per the above notes.

= lit; = unlit

= lit; = unlit; = ﬂashing

17-05-362-9336ED.indb 3 6/7/2017 1:34:17 PM

Product specificaties

Merk:	Tripp Lite
Categorie:	powerbank
Model:	UPB-10K4-S2U
Kleur van het product:	Zwart
Gewicht:	270 g
Breedte:	64 mm
Diepte:	25 mm
Hoogte:	140 mm
Snoerlengte:	0.9 m
Gewicht verpakking:	450 g
Breedte verpakking:	116.8 mm
Diepte verpakking:	233.7 mm
Hoogte verpakking:	48.3 mm
Materiaal behuizing:	ABS kunststof
LED-indicatoren:	Ja
Capaciteit van de accu/batterij:	10400 mAh
Land van herkomst:	China
Certificering:	CE, FCC
Duurzaamheidscertificaten:	RoHS
Oplaadbron:	AC
Stroomspanning bescherming:	Overstroom
Lader compatibiliteit:	Universeel
Aantal gelijktijdig verbonden apparaten (max):	2
Invoer interface:	Micro-USB
USB A-uitvoerpoorten:	2
(Buitenste) hoofdverpakking hoogte:	259.1 mm
(Buitenste) hoofdverpakking breedte:	256.5 mm
(Buitenste) hoofdverpakking brutogewicht:	4310 g
(Buitenste) hoofdverpakking lengte:	256.5 mm
Hoeveelheid per (buitenste) hoofdverpakking:	10 stuk(s)
Bedrijfstemperatuur (T-T):	0 - 45 °C
Relatieve vochtigheid in bedrijf (V-V):	-15 - 45 procent
Batterijtechnologie:	Lithium-Ion (Li-Ion)
GTIN (EAN/UPC)-nummer (buitenste) hoofdverpakking:	10037332203929
Poort 1 uitgangsstroom:	1 A
Poort 2 uitgangsstroom:	2.4 A