Tripp Lite T014-001 Handleiding

Tripp Lite Niet gecategoriseerd T014-001

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite T014-001 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 11 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

Owner’s Manual

All-in-One Cable Tester

Model: T014-001

PROTECT YOUR INVESTMENT!

and ultimate peace of mind.

You could also win an ISOBAR6ULTRA

surge protector—a $100 value!

www.tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

15-11-100-9334E3-EN.indd 1 11/20/2015 2:07:01 PM

Package Includes

Operation

Product Features

• T014-001 All-in-One Cable Tester

• BNC to RJ11 Adapter

• Carrying Case

• Owner’s Manual

Testing is as simple as connecting the desired cable and pressing the button.

When testing an uninstalled patch cable, you can leave the Main and

Remote testers connected. For testing BNC cable, the included BNC to RJ11

adapter will be needed to connect to the RJ11 port on the Remote tester.

When testing installed cable, you will have to remove the Remote Tester

from the Main Tester. Connect one end of the cable to the appropriate

connector on the Main Tester and the other end of the cable to the

appropriate connector on the Remote Tester.

Upon pressing the test button, you will hear one or more beeps from the Main

Tester, and the LEDs on the Main Tester will illuminate to indicate the

results:

• All-in-one cable tester combines a Main Tester unit with a Removable

Remote Tester unit

• Test cable connectivity, determining a connection, no connection, short or

crossed connection

• Allows for testing of multiple cable types: RJ11, RJ45, USB, and BNC

• Test cable lengths up to 600 ft. (180 m)

• Battery status LED indicates whether the battery is good, or is low and

needs to be replaced

• Testing is as simple as pressing a button

15-11-100-9334E3-EN.indd 2 11/20/2015 2:07:01 PM

Operation (continued)

Short – If there is a short in the cable, three beeps will sound, and the

SHORT PinLED will illuminate. In addition, the LED(s) for the pin(s) where a

short exists will illuminate.

Connected – When a connection from one end of the cable to the other is

found, a low-to-high beep will sound and the LED will illuminate. Also, PASS

the of any pin(s) where a connection is found will illuminate. Listed Pin LEDs

below are the pins that are supposed to be connected for each connector

type. If all of the necessary pins for your connector type do not illuminate,

those that do not illuminate are open.

• – Pins 1 through 8 should be connectedRJ45 (UTP)

• – Pins 1 through 8 and the S pin should be connectedRJ45 (STP)

• – RJ11 cables can be 2-wire, 4-wire, or 6-wire. 2-wire RJ11 RJ11

cables use pins 3 and 4, 4-wire pins 2-5, and 6-wire pins 1-6

• – Pins 1-4 and the S pin should be connectedUSB

• – Pins 1 and 2 should be connectedBNC

Crossed – If there are crossed wires in a cable, such as in a crossover

cable, two beeps will sound and the LED will illuminate. The CROSS Pin

LEDs of any pin(s) where a connection is found will illuminate, with the

ﬂashing LEDs indicating pins that are crossed.

No Connection – When there is no connection found between the

connectors of the cable being tested, a single beep will sound and the OPEN

LED will illuminate. None of the LEDs at the top of the Main Tester Pin/Wire

Interface will illuminate. This means either that the cable is not plugged into

the connector on the Remote Tester, or there are no intact pin connections

from one end of the cable to the other.

Battery Status

There are two battery status LEDs on the Main Tester: and Battery Good

Battery Low Battery Low. If the LED is illuminated, replace the tester’s 9V

battery.

15-11-100-9334E3-EN.indd 3 11/20/2015 2:07:02 PM

Product specificaties

Merk:	Tripp Lite
Categorie:	Niet gecategoriseerd
Model:	T014-001
Kleur van het product:	Zwart
Ingebouwd display:	Nee
Gewicht verpakking:	230 g
Breedte verpakking:	110 mm
Diepte verpakking:	45 mm
Hoogte verpakking:	183.9 mm
Meegeleverde kabels:	BNC,Phone (RJ-11)
Land van herkomst:	China
Accu/Batterij voltage:	9 V
Opbergetui:	Ja
(Buitenste) hoofdverpakking hoogte:	480.1 mm
(Buitenste) hoofdverpakking breedte:	199.9 mm
(Buitenste) hoofdverpakking brutogewicht:	2600 g
(Buitenste) hoofdverpakking lengte:	119.9 mm
Hoeveelheid per (buitenste) hoofdverpakking:	10 stuk(s)
GTIN (EAN/UPC)-nummer (buitenste) hoofdverpakking:	10037332189926
Testtype:	Transmissie testen
Ondersteunde aansluitingen:	BNC,RJ-11,RJ-45,USB