Tripp Lite SRSHELFKBD Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite SRSHELFKBD (12 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
1
Owner’s Manual
1U Rackmount Keyboard
Model: SRSHELFKBD
1111 West 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2015 Tripp Lite. All rights reserved.
Package Contents
Overview
• Full 88-key keyboard and touch pad in a 1U, heavy-duty steel housing
• Rackmountable in standard 19-inch racks (1U)
• Includes rackmount brackets
• Includes KVM cable kit for connection to a USB port on a computer or KVM
• Sliding design allows for convenient access and discreet storage
SAVE THESE INSTRUCTIONS
This manual contains important instructions that should be followed during the installation and operation of the product described in this
manual. Read all instructions thoroughly before attempting to install or operate the rackmount keyboard unit. Failure to comply may void
the warranty and could damage the rackmount keyboard unit or connected equipment.
WARNING:
Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the
life support equipment or to significantly affect its safety or effectiveness is not recommended. Do not use this equipment in the presence
of a flammable anesthetic mixture with air, oxygen or nitrous oxide.
Español p. 5 Français p. 9
• 1U Rackmount Keyboard
• KVM Cable Kit (USB)
• Owner’s Manual
• Mounting Brackets
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $50 value!
www.tripplite.com/warranty
2
Introduction
Front View
A Handle: Pull to slide the module out; push to slide the
module in.
B Keyboard
C Rackmounting Brackets: The brackets secure the chassis to
a standard 19-inch rack or rack enclosure.
D 2-Button Touchpad: Press the left button to left-click, press
the right button to right-click. Scroll up and down the screen by
running your finger up or down the far right side of the touchpad.
Rear View
E Console Port Section: Connects the unit to your server or
KVM switch with the included KVM cable kit.
Rackmounting
Tripp Lite's 1U Rackmount Keyboard is designed for 2- or 4-post
mounting in a 1U rack system.
4-Post Rackmounting
To install the unit in a 4-post rack, attach and secure the unit’s
mounting ears to the rack’s front and rear vertical mounting rails
with user-supplied hardware.
2-Post Rackmounting
The unit can also be mounted in a 2-post rack using the optional
2-Post Rackmount Kit (Tripp Lite model B019-000). The mounting
hardware allows for the console to be opened with the drawer in any
position. The kit provides added stability and prevents the unit's
frame from twisting. See the B019-000 Owner's Manual for detailed
mounting instructions.
A
E
D
B
C
C
C
4-Post Installation
3
Refer to the installation diagrams below as you perform these steps.
Note: Make sure the power to the computer or KVM switch being connected to the unit is powered off before proceeding with the installation.
1 Plug the Black USB connector on the included cable kit into the USB port on the back of the unit.
2 Plug the Blue USB connector on the other side of the cable kit to the USB port on the back of your computer or KVM switch.
Note: Although KVM switches will contain two USB console ports for keyboard and mouse, you can plug the single USB connector on the adapter into
either port.
Computer Installation
Function Specification
Cable Kit USB-A (Male) to USB-A (Male)
Environment
Operating Temperature: 32º to 104ºF (0º to 40ºC)
Storage Temperature: -4º to 140ºF (-20º to 60ºC)
Humidity: 0 - 80% RH Non-Condensing
Housing Metal
Weight 19.6 lb. (9 kg)
Dimensions [L x W x H] 18.9 x 21.75 x 1.7 in. (480 x 552 x 43 mm)
Installation
Specifications
KVM Installation
Note: The diagram below shows connection to a B042-016 KVM switch. The console ports of different model KVM switches may be located elsewhere on the
unit.
Computer Installation
KVM Installation
1
1
2
2


Product specificaties

Merk: Tripp Lite
Categorie: Niet gecategoriseerd
Model: SRSHELFKBD
Kleur van het product: Zwart
Gewicht: 8890 g
Breedte: 478 mm
Diepte: 552.4 mm
Hoogte: 43.4 mm
Gewicht verpakking: 10890 g
Breedte verpakking: 519.9 mm
Diepte verpakking: 579.9 mm
Hoogte verpakking: 150.1 mm
Type stroombron: USB
Land van herkomst: Taiwan
Aantal toetsen, toetsenbord: 104
Duurzaamheidscertificaten: RoHS
Aanbevolen gebruik: Dienst
Backlight: Nee
Aansluiting: USB
Numeriek toetsenblok: Ja
Inclusief muis: Nee
Aanwijsapparaat: Touchpad- + muisknoppen
Windows-toetsen: Ja
Oppervlakte kleur: Monochromatisch
Polssteun: Nee
(Buitenste) hoofdverpakking hoogte: 150.1 mm
(Buitenste) hoofdverpakking breedte: 519.9 mm
(Buitenste) hoofdverpakking brutogewicht: 10890 g
(Buitenste) hoofdverpakking lengte: 579.9 mm
Hoeveelheid per (buitenste) hoofdverpakking: 1 stuk(s)
Toetsenbord formaat: Volledige grootte (100%)
Stijl toetsenbord: Recht
Dimensies toetsenbord (BxDxH): 478 x 552.5 x 43.4 mm
Gewicht toetsenbord: 8890 g
Aantal producten inbegrepen: 1 stuk(s)

Heb je hulp nodig?

Als je hulp nodig hebt met Tripp Lite SRSHELFKBD stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Tripp Lite

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd