Tripp Lite SRSEHOOD Handleiding

Tripp Lite Niet gecategoriseerd SRSEHOOD

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite SRSEHOOD (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

WARNING: Do not attempt to use the roof panel for weight-bearing purposes other than those

explicitly described and approved by Tripp Lite. Do not attempt to add or remove the roof panel without

assistance.

Installation Instructions

SmartRack® Service Entry Hood

Model: SRSEHOOD

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

WARRANTY REGISTRATION

automatically entered to win an ISOBAR®

surge protector in our monthly drawing!

tripplite.com/warranty

1. Remove the Roof Panel

Models with a Toolless Roof

1 Pull the 2 pins near the rear of

the roof panel A. While holding

the pins, push the roof panel

upward B.

2 Remove the roof panel tabs A

from the roof panel attachment

slots B in the enclosure frame.

3 Lift the roof panel from the

enclosure.

1 2 3

Español 3 • Français 5 • Русский 7

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

21-04-128 93-3ECE_RevA

Tripp Lite has a policy of continuous improvement. Product speciﬁcations are subject to change without notice.

Photos and illustrations may differ slightly from actual products.

2. Installing the Drip-Resistant Cable Access

Housing

1 Remove one of the rubber sealing plugs from the top rear of the

enclosure by pushing it out from inside of the unit.

2 Using the included M4 x 8 mm pan head machine screws and toothed

washers (4 of each), fasten the screws into each of the threaded

holes.

1 2

1. Remove the Roof Panel (continued)

Models with Screws Securing the Roof

1 Remove the four 4 screws (2 on front, 2 on back) that

attach the roof panel to the unit.

2 Lift the roof panel from the enclosure.

ADVERTENCIA: No intente usar el panel de techo para soportar pesos que no sean los descritos

explícitamente y aprobados por Tripp Lite. No intente colocar o retirar el panel de techo sin ayuda.

Instrucciones de Instalación

Capuchón de Entrada para

Servicio SmartRack®

Modelo: SRSEHOOD

1111 W. 35th Street, Chicago, IL 60609, EE. UU. • tripplite.com/support

1. Retire el Panel del Techo

Modelos con Techo Sin Herramientas

1 Jale las 2 clavijas cercanas a la

parte trasera del panel de techo A.

Mientras las sostiene, empuje el

panel de techo hacia arriba B.

2 Retire las pestañas A de las

ranuras de ﬁjación del panel de

techo B en el marco del gabinete.

3 Levante el panel de techo del

gabinete.

1 2 3

English 1 • Français 5 • Русский 7

Product specificaties

Merk:	Tripp Lite
Categorie:	Niet gecategoriseerd
Model:	SRSEHOOD
Kleur van het product:	Zwart
Gewicht:	1130 g
Breedte:	240.8 mm
Diepte:	124 mm
Hoogte:	169.4 mm
Gewicht verpakking:	1360 g
Breedte verpakking:	140 mm
Diepte verpakking:	260.1 mm
Hoogte verpakking:	180.1 mm
Land van herkomst:	China
Aantal per verpakking:	1 stuk(s)
(Buitenste) hoofdverpakking hoogte:	620 mm
(Buitenste) hoofdverpakking breedte:	480.1 mm
(Buitenste) hoofdverpakking brutogewicht:	36740 g
(Buitenste) hoofdverpakking lengte:	800.1 mm
Hoeveelheid per (buitenste) hoofdverpakking:	27 stuk(s)
Code geharmoniseerd systeem (HS):	7326.90.8688
GTIN (EAN/UPC)-nummer (buitenste) hoofdverpakking:	10037332266948
Diepte (max):	169.4 mm