Tripp Lite SPS406HGULTRA Handleiding

Tripp Lite Niet gecategoriseerd SPS406HGULTRA

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite SPS406HGULTRA (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 11 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

Owner's Manual

SPS406HGULTRA

(Series Number: AGIB8116)

Surge Protector

Approved for Patient Care Areas

IMPORTANT SAFETY INSTRUCTIONS. SAVE THESE INSTRUCTIONS.

WARNING!

Use of this equipment in life support applications where failure of this equipment can

reasonably be expected to cause the failure of the life support equipment or to significantly

affect its safety or effectiveness is not recommended. Do not use this equipment within

oxygen-enriched atmospheres, or within 0.3 m (1 ft.) of a point at which an oxygen-enriched

atmosphere is intentionally vented.

CAUTION!

DO NOT connect to an ungrounded outlet. DO NOT use with extension cords or adapters that

eliminate the connection to ground. The surge protector is designed for indoor use only.

Install the surge protector away from heat emitting appliances such as radiators or heat

registers. Do not install where excessive moisture or other conductive contaminants are

present. Never install electrical wiring during a lightning storm.

AUTOMATIC OPERATION!

The surge protector includes a ground detection and power polarity detection circuit with LED

for added safety. When the surge protector is plugged into a wall outlet, it detects whether a

proper ground is present. If a proper ground is detected, the green LED illuminates and AC

power is routed to the output receptacles. If a proper ground is not detected, the LED does

not illuminate and AC power is not routed to the output receptacles. The surge protector also

features an internal protection that will disconnect the surge-protective component at the

end of its useful life. The surge protector will distribute AC power and the LED will illuminate

only when all of its surge suppression components are functioning properly and it is

connected to a properly-wired AC outlet.

US Patent #7,375,939 and #8,339,759

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

PROTECT YOUR INVESTMENT!

and ultimate peace of mind.

You could also win an ISOBAR6ULTRA

surge protector—a $100 value!

www.tripplite.com/warranty

16-01-054-93358A.indb 1 1/21/2016 12:41:07 PM

1) Connect Your Surge Protector to Your AC Power Line

Plug the power cord into a utility outlet. The surge protector’s power cord should only be

connected to a standard 3-wire grounded 120V AC 60 Hz outlet.

2) Connect AC Equipment to Your Surge Protector

Plug the AC power cords of your equipment into your surge protector. Do not use extension

cords or adapters that eliminate the connection to ground. DO NOT OVERLOAD your surge

protector. Each outlet can handle a load of up to 12A, but do not exceed a total load of

more than 12A for all outlets. If the circuit breaker trips, outlets will cease to provide power.

Reduce the load on the surge protector down to your unit’s amp rating by unplugging excess

equipment, then depress the circuit breaker button to reset and restore power.

Installation

Lifetime Limited Warranty

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

The seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material and workmanship for its

lifetime. If the product should prove defective in material or workmanship within that period, Seller will repair or replace the product, in its sole discretion.

Service under this Warranty can only be obtained by your delivering or shipping the product (with all shipping or delivery charges prepaid) to: Tripp Lite,

1111 W. 35th St., Chicago, IL 60609. Seller will pay return shipping charges.THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE

RESULTING FROM ACCIDENT, MISUSE, ABUSE OR NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY EXPRESSLY SET

FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES, INCLUDING ALL WARRANTIES OF

MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE; AND THIS WARRANTY EXPRESSLY EXCLUDES

ALL INCIDENTAL AND CONSEQUENTIAL DAMAGES. (Some states do not allow limitations on how long an implied warranty lasts, and some states do not

allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This Warranty gives

you specific legal rights, and you may have other rights which vary from jurisdiction to jurisdiction.)To receive service under this warranty, you must be the

original purchaser/user of the product in question. You must obtain a Returned Material Authorization (RMA) number from TRIPP LITE. Products must be

returned to TRIPP LITE with transportation charges prepaid and must be accompanied by a brief description of the problem and proof of date and place of

purchase. TRIPP LITE; 1111 W. 35th St.; Chicago, IL 60609

WARNING: The individual user should take care to determine prior to use whether this device is suitable, adequate or safe for the use intended. Since

individual applications are subject to great variation, the manufacturer makes no representation or warranty as to the suitability or fitness of these devices

for any specific application.

WARRANTY REGISTRATION

Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You'll be automatically entered into a drawing for a chance to

win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

Service

Your Tripp Lite product is covered by the warranty described in this manual. A variety of Extended Warranty and On-Site Service Programs are also available

from Tripp Lite. For more information on service, visit www.tripplite.com/support. Before returning your product for service, follow these steps:

1. Review the installation and operation procedures in this manual to insure that the service problem does not originate from a misreading of the

instructions.

2. If the problem continues, do not contact or return the product to the dealer. Instead, visit www.tripplite.com/support.

3. If the problem requires service, visit www.tripplite.com/support and click the Product Returns link. From here you can request a Returned Material

Authorization (RMA) number, which is required for service. This simple on-line form will ask for your unit’s model and serial numbers, along with other

general purchaser information. The RMA number, along with shipping instructions will be emailed to you. Any damages (direct, indirect, special or

consequential) to the product incurred during shipment to Tripp Lite or an authorized Tripp Lite service center is not covered under warranty. Products

shipped to Tripp Lite or an authorized Tripp Lite service center must have transportation charges prepaid. Mark the RMA number on the outside of the

package. If the product is within its warranty period, enclose a copy of your sales receipt. Return the product for service using an insured carrier to the

address given to you when you request the RMA.

Regulatory Compliance Identification Numbers

For the purpose of regulatory compliance certifications and identification, your Tripp Lite product has been assigned a unique series number. The series

number can be found on the product nameplate label, along with all required approval markings and information. When requesting compliance information

for this product, always refer to the series number. The series number should not be confused with the marking name or model number of the product.

WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)

Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when customers buy new electrical and

electronic equipment from Tripp Lite they are entitled to:

• Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country)

• Send the new equipment back for recycling when this ultimately becomes waste

Tripp Lite has a policy of continuous improvement. Product specifications are subject to change without notice.

16-01-054-93358A.indb 2 1/21/2016 12:41:07 PM

Manual del Propietario

SPS406HGULTRA

(Número de Serie: AGIB8116)

Supresor de Sobretensiones

Aprobado para áreas del cuidado de pacientes

INSTRUCCIONES DE SEGURIDAD IMPORTANTES.

CONSERVE ESTAS INSTRUCCIONES.

¡ADVERTENCIA!

El uso de este equipo en aplicaciones de soporte de vida en donde la falla de este equipo

pueda razonablemente hacer suponer que causará fallas en el equipo de soporte de vida o

afecte significativamente su seguridad o efectividad, no está recomendado. No use este

equipo en atmósferas enriquecidas con oxígeno o a distancias inferiores a 0.3 m de un

punto en que se ventile deliberadamente una atmósfera enriquecida con oxígeno.

¡PRECAUCIÓN!

NO conecte a un tomacorriente sin conexión a tierra. No use con cables de extensión o

adaptadores que eliminen la conexión a tierra. El supresor de sobretensiones está diseñado

para uso en interiores solamente. Instale el supresor de sobretensiones alejado de aparatos

emisores de calor como radiadores o rejillas de calefacción. No instalar en donde haya

humedad excesiva u otros contaminantes conductores. Nunca instale cableado eléctrico

durante una tormenta eléctrica.

¡OPERACIÓN AUTOMÁTICA!

El supresor de sobretensiones incluye una detección de tierra y detección de polaridad de

alimentación con LEDs para una seguridad aumentada. Cuando el supresor de

sobretensiones está enchufado a una toma de pared, detecta si hay una conexión a tierra

adecuada. Si se detecta una conexión a tierra adecuada, el LED verde se enciende y la

energía de CA es conducida a los tomacorrientes. Si no se detecta una conexión a tierra

adecuada, el LED no se enciende y la energía de CA no es conducida a los tomacorrientes.

El supresor de sobretensiones cuenta además con una protección interna que desconectará

el componente supresor de sobretensiones al final de su vida útil. El supresor de

sobretensiones distribuirá la alimentación de CA y el LED se encenderá solo cuando sus

componentes de supresión de sobretensiones funcionen correctamente y esté conectado a

una salida CA correctamente cableada.

No. de Patente de USA #7,375,939 y #8,339,759

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

16-01-054-93358A.indb 3 1/21/2016 12:41:08 PM

Product specificaties

Merk:	Tripp Lite
Categorie:	Niet gecategoriseerd
Model:	SPS406HGULTRA
Kleur van het product:	Wit
Gewicht:	1080 g
Breedte:	63.5 mm
Diepte:	46.7 mm
Hoogte:	346.2 mm
Snoerlengte:	1.83 m
Gewicht verpakking:	1200 g
Breedte verpakking:	151.9 mm
Diepte verpakking:	55.1 mm
Hoogte verpakking:	359.9 mm
Land van herkomst:	China
Certificering:	UL 60601-1, UL 60950-1 (USA), CAN/CSA-C22.2 No. 601.1-M90, 60950-1-03 (Canada)
Materiaal:	Metaal
Duurzaamheidscertificaten:	RoHS
Ophangsysteem voor aan de muur:	Ja
(Buitenste) hoofdverpakking hoogte:	389.9 mm
(Buitenste) hoofdverpakking breedte:	305.1 mm
(Buitenste) hoofdverpakking brutogewicht:	12540 g
(Buitenste) hoofdverpakking lengte:	320 mm
Hoeveelheid per (buitenste) hoofdverpakking:	10 stuk(s)
AC-ingangsfrequentie:	50 - 60 Hz
GTIN (EAN/UPC)-nummer (buitenste) hoofdverpakking:	10037332194098
Surge energy rating:	1410 J
Aantal AC uitgangen:	4 AC-uitgang(en)
Nominale input voltage:	120 V
Stopcontacttypes:	NEMA 5–15R
Nominale stroom output:	15 A
Over current bescherming:	Ja