Tripp Lite SmartRack SRWOSHELFSM Handleiding

Tripp Lite Niet gecategoriseerd SmartRack SRWOSHELFSM

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite SmartRack SRWOSHELFSM (16 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
1
Owner’s Manual
Wall-Mountable Shelf for
Open Frame Racks
Models: SRWOSHELFSM, SRWOSHELFLG
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
Copyright © 2021 Tripp Lite. All rights reserved.
WARRANTY REGISTRATION
Register your product today and be
automatically entered to win an ISOBAR
®
surge protector in our monthly drawing!
tripplite.com/warranty
Introduction 2
Important Safety Instructions 2
Parts List 2
Assembly 3
Equipment Installation 4
Storage & Service 5
Warranty & Product Registration 5
Español 6
Français 11
2
Tripp Lite’s SRWOSHELFSM and SRWOSHELFLG are the perfect open frame rack solution for applications where space
is limited. Heavy-duty construction and a wall-mount form factor keep equipment out of the way. The SRWOSHELFSM
and SRWOSHELFLG accommodates all standard 19-inch rack-mount equipment.
Base Panel Right Panel Left Panel Rear Panel
Top Shelf
(SRWOSHELFLG Only)
M5 x 8 Screw
(x12) SRWOSHELFSM
(x16) SRWOSHELFLG
SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that must be followed during the installation and operation
of the product described in this manual. Failure to comply may invalidate the warranty and cause property
damage or personal injury.
• Keep the rack in a controlled indoor environment, away from moisture, temperature extremes, flammable liquids and
gasses, conductive contaminants and dust.
• Leave adequate space at the front of the rack for proper ventilation.
• Inspect the shipping container and the rack for shipping damage. Do not use the rack if it is damaged.
• Leave the rack in the shipping container until it has been moved as close to the final installation location as possible.
• Install the rack in a structurally sound area capable of handling the load, the weight of the rack, all equipment that will be
installed in the rack and any other equipment that will be installed nearby.
• Save all packing materials for later use. Repacking and shipping the enclosure without the original packing materials
may cause product damage that may affect the warranty.
• Do not attempt to install the rack unassisted.
• Do not attempt to install equipment without first wall-mounting and stabilizing the rack.
• Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause
the failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended.
Introduction
Parts List
Important Safety Instructions
3
Assembly
WARNING: Do not attempt to mount the rack to the wall with
equipment mounted to the rack.
WARNING: The wall surface, the wall studs and all user-supplied mounting hardware must be able to support
the combined weight of the rack and all equipment that will be installed in the rack.
Note: Recommended torque for tightening all M5 screws is 35 in•lbf (3.9 N•m).
Step 1 Using two M5 X 8 mm screws in the front and
middle position, attach the Left Panel to the Base Panel.
Step 2 Using two M5 X 8 mm screws in the front and
middle position, attach the Right Panel to the Base Panel.
Step 3 Using eight M5 X 8 mm screws (three per side and
two at the bottom rear), attach the Rear Panel to the Base
Panel.
SRWOSHELFLG Model Only Using six M5 X 8 mm
screws, attach the Top Shelf.


Product specificaties

Merk: Tripp Lite
Categorie: Niet gecategoriseerd
Model: SmartRack SRWOSHELFSM

Heb je hulp nodig?

Als je hulp nodig hebt met Tripp Lite SmartRack SRWOSHELFSM stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Tripp Lite

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd