Tripp Lite SmartRack SRW9UDPGVRT Handleiding

Tripp Lite Niet gecategoriseerd SmartRack SRW9UDPGVRT

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite SmartRack SRW9UDPGVRT (36 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/36
Table of Contents
1. Important Safety Instructions 2
2. Overview 2
3. Feature Identification 3
4. Enclosure Installation 4
4.1 Preparation 4
4.2 Unpacking 4
4.3 Ground Connection 4
5. Enclosure Configuration 5
5.1 Door Locks 5
5.2 Cable Access & Management 5
5.3 Reversing the Enclosure 5
5.4 Mounting Rails 6
5.5 Adjusting Mounting Rail Depth 6
6. Wall Mounting the Enclosure 6
7. Equipment Installation 7
7.1 Installing or Removing Cage Nuts 7
7.2 Alternate Mounting: 7
Tapped Hole Mounting Rail
7.3 Horizontal Rack-Mount Installation 8
7.4 Vertical Rack-Mount Installation 8
7.5 Cable Routing 8
8. Storage and Service 9
9. Warranty and Product Registration 9
Español 10
Français 19
 28
Non-Swinging Wall-Mounted
SmartRack® Enclosure
Models: SRW9UDPVRT, SRW9UDPGVRT
(Series Number: AG-00E9)
Owners Manual
1111 W. 35th Street, Chicago, IL 60609 USA www.tripplite.com/support
Copyright © 2018 Tripp Lite. All trademarks are the sole property of their respective owners.
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $100 value!
www.tripplite.com/warranty
2
1. Important Safety Instructions
2. Overview
SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that must be followed during the installation and operation of the product described in this manual.
Failure to comply may invalidate the warranty and cause property damage or personal injury.
Keep the enclosure in a controlled indoor environment, away from moisture, temperature extremes, flammable liquids and gasses, conductive
contaminants, dust and direct sunlight.
Leave adequate space at the front and rear of the enclosure for proper ventilation. Do not block, cover or insert objects into the external ventilation
openings of the enclosure.
The enclosure is extremely heavy. Use caution when handling the enclosure. Do not attempt to unpack, move or install it unassisted. Use a
mechanical device such as a forklift or pallet jack to move the enclosure in the shipping container.
Do not place any object on the enclosure, especially containers of liquid, and do not attempt to stack the enclosures.
Inspect the shipping container and the enclosure for shipping damage. Do not use the enclosure if it is damaged.
Leave the enclosure in the shipping container until it has been moved as close to the final installation location as possible.
Install the enclosure in a structurally sound area capable of handling the load, or on a level floor that is able to bear the weight of the enclosure, all
equipment that will be installed in the enclosure and any other enclosures and/or equipment that will be installed nearby.
For permanent wall mounting, be sure to securely fasten the enclosure to the building structure before operation.
Use caution when cutting packing materials. The enclosure could be scratched, causing damage not covered by the warranty.
Save all packing materials for later use. Repacking and shipping the enclosure without the original packing materials may cause product damage
that will void the warranty.
Do not reship the enclosure with additional equipment unless the enclosure was shipped with a special shock pallet (“SP1” models only). The
combined weight of the enclosure and installed equipment must not exceed the load capacity of the pallet. Tripp Lite is not responsible for any
damage that occurs during reshipment.
Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support
equipment or to significantly affect its safety or effectiveness is not recommended.
Non-swinging wall-mounted SmartRack enclosures accommodate all standard 19-inch rack-mount equipment, regardless of vendor, and ship fully
assembled for quick and easy deployment. They feature adaptable, heavy-duty cabinets in various heights.
Non-swinging wall-mounted SmartRack enclosures have variable mounting depths. The cabinets include quick-release doors and side panels for
convenient maintenance. Front access doors are reversible for installation flexibility. Front door and side panels are lockable. Vertical rack-mount
brackets are located on the left and right sides of the cabinet can accommodate an additional 2U of equipment. Front and rear vertical cable
managers and four cable pass-through ports located on the top and bottom of the cabinets allow for easy, organized cable routing.
3
3. Feature Identification
1 Front Door
(Clear acrylic window included with
SRW9UDPGVRT model)
2 Horizontal Rails
3 Vertical Mounting Rails (Adjustable)
4 Cable Access Hole Cover (Removable)
5 Ventilation Fan Ports
6 Locking/Removable Side Panels with Ventilation Fan Ports
7 Cable Pass-Through with Brush Strip
8 Cable Tie Cut Outs
9 2U Mounting Brackets
10
Vertical Cable Manager with Finger Ducts
11
Ground Stud
12
Mounting Notches
13
Mounting Plate with Hooks
13
12
10
10
4
4
2
2
9
3
3
5
6
6
7
7
8
8
1
11


Product specificaties

Merk: Tripp Lite
Categorie: Niet gecategoriseerd
Model: SmartRack SRW9UDPGVRT
Kleur van het product: Zwart
Gewicht: 24100 g
Breedte: 752.4 mm
Diepte: 551.5 mm
Hoogte: 503.7 mm
Gewicht verpakking: 26700 g
Breedte verpakking: 619.8 mm
Diepte verpakking: 819.9 mm
Hoogte verpakking: 585 mm
Soort: Wandrek
Gebruikershandleiding: Ja
Internationale veiligheidscode (IP): IP20
Land van herkomst: China
Maximale gewichtscapaciteit: 91 kg
Duurzaamheidscertificaten: RoHS
Inclusief schroeven: Ja
Aantal schroeven: 44
Wand montagekit: Ja
(Buitenste) hoofdverpakking hoogte: 585 mm
(Buitenste) hoofdverpakking breedte: 619.8 mm
(Buitenste) hoofdverpakking brutogewicht: 26700 g
(Buitenste) hoofdverpakking lengte: 819.9 mm
Hoeveelheid per (buitenste) hoofdverpakking: 1 stuk(s)
Rackcapaciteit: 9U
Code geharmoniseerd systeem (HS): 8517.79.0000
Sleutelsleuf: Ja
Inbegrepen sluitringen aantal: 22
Moeren inbegrepen: Ja
Moeren aantal: 22

Heb je hulp nodig?

Als je hulp nodig hebt met Tripp Lite SmartRack SRW9UDPGVRT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Tripp Lite

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd